similar to: Using MGE UPS's with NUT and openSUSE

Dear List, I have an MGE Ellipse 1500. I run openSUSE 10.2, kernel 2.6.18, libusb 0.1.12, nut 2.0.5. ps shows that the following processes are running: /usr/lib/ups/driver/newhidups -a mgeups /usr/sbin/upsd -u root /usr/sbin/upsmon /usr/sbin/upsmon NUT operates correctly, shutting down the server after 4 minutes without power. However I'm seeing 25 to 50 messages logged each day in

- UPS MGE Premium Ellipse Premium 1200 - SuSE Linux 10.0 OSS, kernel 2.6.13 smp - gcc version 4.0.2 20050901 (prerelease), glibc-2.3.5-40 - mgeups-psp-3.0.0-3, nut-2.0.2-4 - Dell Dimension 8400 with dual core Intel Xeon. 3.0GHz. lsusb shows: Bus 002 Device 003: ID 0463:ffff MGE UPS Systems UPS less /proc/bus/usb/devices shows for bus 2 device 3: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=

Hi, I bought an Ellipse MAX 1100 a few months ago. First I attached it to my desktop and installed mge's personal solution pac. (a graphical interface which uses nut). It works. But I want to attach the ups to my server which runs without an x-server. I followed http://opensource.mgeups.com/install/debian.htm. Didn't work. Then I copied over the configuration files which the personal

I'll be back one more time perhaps I found the reason of these errors Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale it happens when daemon upsd et upsmon are started after the boot obviously, there isn't any errors when upsd and upsmon are started at boot following later ... -----Message d'origine----- De : goudard sabine Envoy? : mardi

Hello, It is 3 or 4 weeks ago since, i want to set communication with my ups a MGE NOVA 1100 AVR. I do it first with manual configuration but after no success, i prefered to install mgeups-psp package to do it directly. But since when i execute psp, the attempt finish with an "No communication with UPS" error. Same is when i type: mge-shut -u root -DDDDDDDDDD /dev/ttyS0 . I unplog

Hello, I have installed mgeups (for Mge ellipse premium 500) in a Suse 10 x86_64 machine with yast2. But when I try to launch psp I receive the next error: psp: error while loading shared libraries: libgtkmm-2.4.so.1: cannot open shared object file: No such file or directory and don't start. The rpms installed are: mgeups-psp-3.0.1-3 nut-2.0.2-5 glibmm24-2.8.0-2 gtkmm24-2.8.0-2

Hi during Startup of SuSE-Linux 7.2 Prof. the PC is sometimes ( 1 of 10 times) stopping by start smbd. Reset knop the help only. I have this problem with the samba version in SuSE package and version 2.2.5 too. In the file ../rc3.d/S12smb I added 2 lines to see if nmbd and smbd are startet. I see nmbd is starting always, the text "SAMBA smbd gestartet" is in case of fault not printing.

Hello, I'm using NUT to manage a MGE Ellipse ASR UPS, with the newhidups driver. It works fine, except that after a few hours, I get a few errors from the kernel and the driver dies. Here's the output from the syslog: Apr 26 02:00:41 ezquiel kernel: usb 1-1: usbfs: USBDEVFS_CONTROL failed cmd newhidups rqt 128 rq 6 len 255 ret -110 Apr 26 02:00:43 ezquiel last message repeated 2 times

Dear List, The driver usbhid-ups does not detect my MGE Ellipse 1500. I'm running openSuSE Linux 10.3, kernel 2.6.22 with mgeups-psp-3.0.4-2, nut-2.2.0-20 installed from MGE's rpm's. (Merci MGE!) lsusb shows: Bus 001 Device 004: ID 0463:ffff MGE UPS Systems UPS /etc/ups/ups.conf says: [myups] driver = usbhid-ups port = auto desc = "Local UPS"

Hi, I have installed in suse 9.3 and ellipse premium 500 usb a psp 3.0 with yast2 and versions: nut-2.0.2-4 mgeups-psp-3.0.0-3 the first time that I launch psp it seems to contact the UPS and you can make changes to the parameters and all seems ok. If you make a reboot the psp hangs up and if you try /etc/init.d/ups it fails: Starting service NUT: -> Starting UPS driver: Network UPS Tools -

Package: xen-utils-common Version: 4.4.1-5 Severity: important Dear Maintainer, I tried to upgrade xen-utils-4.4 depending on xen-utils-common. Here is aptitude answer: ... Param?trage de xen-utils-common (4.4.1-5) ... insserv: Service xenstored has to be enabled to start service xendomains insserv: Service xenconsoled has to be enabled to start service xendomains insserv: exiting now!

Hello, I'll be back with my MGE Evolution 2200 connected with RS232 I upgrade nut 2.0.1 in nut 2.2 + psp as you ask me PSP autodetect my UPS and autoconfigure NUT. not really diffcult ! So I didn't change anything but I always have in my syslog these event Nov 13 11:09:22 mezenc upsmon[3865]: Poll UPS [mgeups at localhost] failed - Data stale Nov 13 11:09:27 mezenc upsmon[3865]: Poll

OPENSOURCE wrote: > > I hope this answer your questions, and I hope you're ready to wait a bit > more. > Sure, NP for me, thanks for the feedback Arnaud. I have to admit that past days im having the syslog with a lil more activity from the new usb attached unit (ellipse ASR 1000 VA) Network UPS Tools: New USB/HID UPS driver 0.23 (2.0.2-pre2) Detected an UPS: MGE UPS

Hi. : ) I was updating my unofficial Korean Ogg Vorbis FAQ, when I noticed the following: While #ext is no longer listed in the FAQ contents, http://www.vorbis.com/faq.psp#ext still exists. IMHO http://www.vorbis.com/faq.psp#stream looks a little awkward. I suggest something like: Icecast streams Ogg vorbis to playsers like XMMS, Winamp 2, and foobar2000, which are all capable of...

Hi, Is there some easy way to install both 2.x and unstable xen tools at the same machine? Seems /usr is hardcoded everythere in the tools Makefiles, looks like there is no easy way to put them to different paths (say, prefix /opt/xen2 and /opt/xen3) :-/ Gerd _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com

For my master's thesis, I am trying to cross compile programs for the PSP (PlayStation Portable) with LLVM and llvm-gcc. This is what I do: (1) compile a program and the libraries it uses (libpng etc.) with llvm-gcc (2) link the bitcode files with llvm-ld into one file (3) run "llc -march=c" on the result (4) compile the resulting C source with the PSP toolchain It seems to work

On Mar 18, 2008, at 10:46 PM, Bruno Cardoso Lopes wrote: > Hi all, > > Last year i was mentored by Chris Lattner at GSoC and i created the > Mips back-end for LLVM. The back-end is still experimental (working > with simple benchmarks only) and this year i would like to improve it > as my GSoC proposal. Mips is still fairly used nowadays in a lot of > devices - routers,

Hello, I'm experiencing a strange early shutdown behavior with the following system: * */OS/*: Slackware Linux 14.2 x86_64 * */NUT/*: 2.7.4 (from my own package <https://sotirov-bg.net/slackpack/pack.cgi?id=4083>) * */UPS/*: MGE Ellipse PRO 1600 <powerquality.eaton.com/Products-services/Backup-Power-UPS/Ellipse-PRO.aspx> (bought in September 2017) */Problem

Hi, I'm forwarding your mail to the NUT list, because of a lack of time, and also since some others (Charles) already looked at this issue IIRC (related to the development branch 'netport'). cheers, Arnaud -- Linux / Unix Expert R&D - Eaton - http://powerquality.eaton.com Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

Kevin André wrote: > For my master's thesis, I am trying to cross compile programs for the > PSP (PlayStation Portable) with LLVM and llvm-gcc. > > This is what I do: > > (1) compile a program and the libraries it uses (libpng etc.) with llvm-gcc > (2) link the bitcode files with llvm-ld into one file > (3) run "llc -march=c" on the result > (4) compile