similar to: which driver for Powerware 5125

Hi, Does anyone know how to make NUT works with Powerware 5125? I already tried serial communication (genericups and bcmxcp) and USB (usbhid-ups and bcmxcp_usb), but without success. I'm using the latest version of NUT (2.6.5) under Debian amd64. Can anyone help me? Thanks. Daniel -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm trying to get a Powerware 5125 UPS running using the bcmxcp driver, but I get the following errors: video2:~# /sbin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - BCMXCP UPS driver 0.10 (2.0.4) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

My UPS is an Exide NetUPS SE PRC1500i (1500 VA), also known as Powerware 5119, according to Karl Schmidt (http://lists.alioth.debian.org/pipermail/nut-upsuser/2005-July/000026.html) also Deltec PowerRite Pro II, and according to http://www.usedups.de/compaq_ups.html also Compaq R3000h. I am not sure if the information in http://www.bps.hu/powerware/model_en.html is to be interpreted as that it was

Hi there. At the moment I'm trying to get my HP T1500 XR (Powerware 5125) UPS to work with NUT. NUT registers that the UPS is on battery/online, but I just cant get the program to shut down the computer I'm using the original cable (thus I didn't enter anything in the ups.conf file) If I remove the cable and run the daemon/program the computer will shutdown after x minutes defined in

On 2/21/2017 8:34 AM, Charles Lepple wrote: > On Feb 20, 2017, at 11:19 AM, Mike <the.lists at mgm51.com> wrote: >> >> This UPS is already listed in the compatibility list. But I wanted to >> add the instant commands supported by upscmd: >> > ... >> and note that a delayed shutoff command is not available. >> >> (NUT 2.7.4 on OpenBSD 6.0)

On 6/29/2013 at 9:59 AM Charles Lepple wrote: |On Jun 29, 2013, at 9:45 AM, Mike. wrote: | |> On 6/29/2013 at 9:14 AM Mike. wrote: |> |> |NUT 2.6.5 on FreeBSD 9.1 |> | |> | |> |Why isn't the variable outlet.1.delay.shutdown set with the following |> |command? |> | |> | |> | |> |# upsc PW5125 at localhost | grep "outlet.1.delay.shutdown" |>

On Jun 29, 2013, at 9:45 AM, Mike. wrote: > On 6/29/2013 at 9:14 AM Mike. wrote: > > |NUT 2.6.5 on FreeBSD 9.1 > | > | > |Why isn't the variable outlet.1.delay.shutdown set with the following > |command? > | > | > | > |# upsc PW5125 at localhost | grep "outlet.1.delay.shutdown" > |outlet.1.delay.shutdown: -1 > | > |# upsrw -u au -p ap -s

I've got a Powerware 5119 RM UPS. driver.list says to use "genericups upstype=20", however I know this UPS supports the UPS Code II protocol, so I wanted to use the upscode2 driver. It took some hacking but finally it works. I'm using NUT 2.4.1 and upscode2 driver version 0.87 (however the latest r2350 version of upscode2.c isn't significantly different, so I think all

Hello, does NUT support Powerware Prestige EXT 1000VA / PowerWorks A30 models in smart mode? I don't see them mentioned in the compatibility list (only Powerware 3115 and 5119 are there, listed as supported only by the "genericups" driver). Is the protocol known to be compatible with any other, supported UPS types? Thanks, Marek

Hi. I'm looking for a way to configure an Eaton Powerware 5125 under Debian Squeeze (amd64) with USB port. Can someone help me? Find attached bellow my settings: # cat /etc/nut/ups.conf ... [ups01] driver = bcmxcp_usb port = /dev/bus/usb/002/003 desc = "Powerware 5125" # ls -la /dev/bus/usb/002/003 crw-rw-r-- 1 root nut 189, 130 Nov 21 11:45 /dev/bus/usb/002/003 #

On Feb 20, 2017, at 11:19 AM, Mike <the.lists at mgm51.com> wrote: > > This UPS is already listed in the compatibility list. But I wanted to > add the instant commands supported by upscmd: > ... > and note that a delayed shutoff command is not available. > > (NUT 2.7.4 on OpenBSD 6.0) > > imo, it would be useful if this info were submitted along with the

On 6/29/2013 at 9:14 AM Mike. wrote: |NUT 2.6.5 on FreeBSD 9.1 | | |Why isn't the variable outlet.1.delay.shutdown set with the following |command? | | | |# upsc PW5125 at localhost | grep "outlet.1.delay.shutdown" |outlet.1.delay.shutdown: -1 | |# upsrw -u au -p ap -s outlet.1.delay.shutdown PW5125 at localhost |Enter new value for outlet.1.delay.shutdown: 10 |OK | |# upsc PW5125

Someone might want to add this to the docs - cable list and compatibility list - took me way to long to find. I was trying to find information on my UPS and came up with the following names for the same UPS series. Powerware 5119 Exide name was NetUPS SE Deltec name was PowerRite Pro II (1000VA-3000VA) What I have: The Exide NETUPS SE model PRC2400a p/n 05144038-3904 OUTPUT 2400VA 1600 WATTS

Hi, I've got a Powerware Prestige 9 1kVA UPS that seems to not be working with nut. It's not in the current "supported hardware" list, but the old bcmxcp page lists it as being a UPS that speaks that protocol. I have the following in my ups.conf [powerware] driver = bcmxcp port = /dev/ttyS0 desc = "Powerware Prestige 9 EXT" baud_rate = 2400 And when I start the

l?rdagen den 29 juni 2013 15.22.44 skrev Mike.: 8<-------------snip----------------- Sorry for the delay. > Here is the console output of bcmxcp with -DDD specified: > > > [snip] > 13.721204 Auto delay on: 2 > > 13.721243 send_command: (4 bytes) => ab 01 35 1f > 13.821127 send_command: (4 bytes) => ab 01 33 21 > 13.920982

This UPS is already listed in the compatibility list. But I wanted to add the instant commands supported by upscmd: ============================ Instant commands supported on UPS [PW5125]: beeper.disable - Disable the UPS beeper beeper.enable - Enable the UPS beeper beeper.mute - Temporarily mute the UPS beeper load.on - Turn on the load immediately outlet.1.load.off - Turn off the load on

2009/8/28 Thomas Zulliger <Thomas.Zulliger at quiksilver.com.au> > Hi Arnaud > Hi Thomas, > I'm experiencing exactly the same problem > > DNS-323 fun_plug Fonz > nut 2.4.1-1.tgz > powerware 3105 > using BCMXCP_usb > > /mnt/HD_a2/packages # lsusb > Bus 002 Device 001: ID 0000:0000 > Bus 001 Device 002: ID 0592:0002 Powerware Corp. > Bus 001

I'm running a freebsd 6.2 system and built the nut port. I cannot seem to connect to serial com1 or 2 /usr/local/etc/nut> upsc apcBK500 at localhost Error: Connection failure: Connection refused My configs: ups.conf ----------------------- [apcBK500] driver = genericups upstype=20 port = /dev/cuad1 upsmon.conf -------------------------- MONITOR apcBK500 at localhost

Hello again, I have a Sola 305 (aka Powerware 3110) here connected via a serial INT-0051 cable which I am trying to get working with nut. The driver.list file indicates that nut supports the Sola 305 when connected via the INT-0025C cable using the genericups driver with upstype set to 7 but it does not mention the INT-0051. I was able to use the "Basic CheckUPS II" utility provided