similar to: usbhid-ups and "data stale"

Hello I'm having a bit of a trouble to set up a Back-UPS on a production box. We're using the newhidups driver for this module here, in the office, and I'd like to monitor the one, out in our server farm. The situation is the following: # /lib/nut/newhidups -u root -DD -a ups1 2> ups1.out Network UPS Tools: 0.28 USB communication driver 0.28 - core 0.30 (2.0.5) this one worked

Hello, I've got a setup with NUT, where we've got two UPSes, ups1 and ups2. UPS1 supports our servers, while UPS2 supports our desktop boxes. We monitor both of them via USB on a box now called "upsmon". The interesting point comes here. We monitor both UPSes on the upsmon box, but if UPS2 fails, which supports our desktop boxes, NUT shouldn't initiate a shutdown in

Hello, We have two APC Back-UPS RS 1500 USB stuff, and i've got a bit of a problem with it and NUT. The usbdevs output: addr 2: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion addr 3: Back-UPS RS 1500 FW:8.g8 .I USB FW:g8, American Power Conversion (UPS1 and UPS2) I've configured our NUT system to monitor the UPSes, and it went very fine till the time had arrived for a

Hi, I have had a long standing problem with NUT talking to 110V MGE UPSs on FreeBSD, I was recently investigating again and noticed that upsd seems overly noisy, eg.. May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale May 5 03:50:36 egbert upsd[96662]: Data for UPS [ups1] is stale - check driver May 5 03:50:36 egbert upsd[96662]: UPS [ups1] data is no longer stale May 5

Greetings all, Anyone have a clue on this behavior (see below) on this behavior with FreeNAS-8.3.0-RELEASE-x64 (r12701M) on a TrippLite 1500LCD UPS? NUT version is 2.6.5 Using the following profile: Tripp-Lite ups 2 Smart1500LCD USB (usbhid-ups) I get the following: Dec 10 21:40:12 nas6 kernel: uhid0: <Tripp Lite TRIPP LITE UPS, class 0/0, rev 1.10/0.02, addr 2> on usbus1 Dec 10 21:40:12

(Note that I mentioned this *was* previously working with an older version of Nut). [irs2-ups1] driver = snmp-ups port = irs2-ups1.sum.naoj.org mibs = auto community = private irs2-ups1.sum.naoj.org responds to pings. On Tue, Oct 8, 2013 at 3:55 PM, Tim Rice <tim at multitalents.net> wrote: > On Tue, 8 Oct 2013, Philip Tait wrote: > > > Here is the upsc

Hi, We have a Ubuntu 14.04 server with dovecot 2.2.9 If I try to run /usr/bin/doveadm search -u email at exmaple.com mailbox Junk savedbefore 30d It will dump a core file. We have a similar config on an other server and there is no problem there. Any ideas how to prevent the core dump? root at triws2:~# gdb --args doveadm search -u email at example.com mailbox Junk savedbefore 30d Reading

I wonder if somebody could help me. If I try clean install of dovecot-common dovecot-imapd dovecot-pop3d from deb http://xi.rename-it.nl/debian stable-auto/dovecot-2.0 main I got: Starting IMAP/POP3 mail server: dovecotdoveconf: Fatal: Error in configuration file /etc/dovecot/dovecot.conf: service(managesieve-login): executable is empty failed! Setting up dovecot-imapd

Hi, I have the above UPS connected to a FreeBSD 6.2 box and it shows 'data stale' very frequently (every few minutes). I have tried the usual trick of setting maxage, poll interval, etc etc but to no avail. When I wind up logging I see (on mge-shut) entering shut_get_report(id: 0d, len: 1800) shut_wait_ack(): ACK received entering shut_get_report(id: 16, len: 1800) shut_wait_ack():

On Tue, 8 Oct 2013, Philip Tait wrote: > Here is the upsc output: > > # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 > Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) > 0.000000 debug level is '2' > 0.000327 SNMP UPS driver : entering upsdrv_initups() [snip] > 4.457750 No supported device detected I'm using a APC smart ups with a

Forgive me, I'm a novice. Consider that today I have already set up a working postfix + Dovecot server with userdb using the static driver and passdb using a password file (in the format <username>:{hashing algorithm}<password hash>). The Dovecot server has several mailboxes which are already in use today. I understand that I'll need to change over to using the passwd-file

Hi, I've got two MGE Ellipse 1500 UPS connected via usb to an ubuntu jaunty system with nut and libupsclient1 2.4.1-2ubuntu4. As soon as I start the driver for the second one, they start fighting each other and I get no data. I found an older post to this list that said: If you want to monitor multiple UPSes through usbhid-ups, you *must* make sure that each one can be uniquely identified

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups can query all three

On 30.08.2017 09:13, Stef?n Tam?s wrote: > Hi, > > We have a Ubuntu 14.04 server with dovecot 2.2.9 > > If I try to run > > /usr/bin/doveadm search -u email at exmaple.com mailbox Junk savedbefore 30d > > It will dump a core file. > > We have a similar config on an other server and there is no problem there. > > Any ideas how to prevent the core dump? >

I am currently trying to use your NUT program to monitor a SMART3000RMOD2U TRIPP LITE device. I find that it connects with the in the device folder as hiddev0 and if I connect a second device it connects under hiddev1. I attempted to use your software with the driver=usbhid-ups and port=auto, but when I try to discover it it can't be found. Then when I run the command /sbin/usbhid-ups -a

Hi, I've got a question about managing two UPSes under NUT. I have two similar model APC usb-connected UPSes to work with, but don't know how to manage them simultaneously from under Windows. Long story short, my ups.conf looks like this: --- ups.conf --- [ups1] driver= usbhid-ups port= auto serial=AS1054340323 [ups2] driver= usbhid-ups port= auto serial=AS1026662626 ---

Here is the upsc output: # /usr/local/ups/bin/snmp-ups -DD -a irs2-ups1 Network UPS Tools - Generic SNMP UPS driver 0.68 (2.6.5) 0.000000 debug level is '2' 0.000327 SNMP UPS driver : entering upsdrv_initups() 0.000341 SNMP UPS driver : entering nut_snmp_init(snmp-ups) 0.056112 SNMP UPS driver : entering load_mib2nut(auto) 0.056126 trying the new

I'm trying to set up nut with a MGE UPS equiupped with a network management card, but encountered a problem. UPS: MGE Pulsar M 3000 Network Management card (installed in the UPS): 66102 (2006 edition) Operating system: FreeBSD Nut port version: 2.0.5 Nut driver: snmp-ups According to MGE in Norway this card is supported by nut, but only the old version of the card (66244) is listed on

Hi, I didn't found an answer for my question in NUT documentation/FAQ or this mailing list archive so I?m posting it here. I want to start a timer only if both of my UPSes remain on battery. Not just one, both. My UPSes are: - ups1@host-a - ups2@host-b Is it possible to use something like this in upssched.conf? AT ONBATT ups1.* && ups2.* START-TIMER onbattwarn 180 Thanks,

> 2017. aug. 30. d?tummal, 12:02 id?pontban Aki Tuomi <aki.tuomi at dovecot.fi> ?rta: > > Something goes wrong when opening "Junk" mailbox. Are you sure it exists? Can you doveadm with > > doveadm -Dv search -u email at example.com mailbox Junk savedbefore 30d There is public namespace defined. Maybe that is the problem? doveadm(root): Debug: Loading modules from