similar to: 24V DC ATX PSU with limited UPS functionality over USB

Hello Charles, Am 2008-03-13 19:27:27, schrieb Charles Lepple: > Another advantage of going the HID PDC route (regardless of whether > NUT is involved) is that the device is essentially self-describing. If > the first version does not have a shutdown flag, but later versions > do, then very little driver code needs to change - just device > firmware. > > Also, I believe that

Hello, Since I have now nearly all stuff running on my LH7A404 and now I am working on my DS80C411, I like to know, whether NUT show the APC UPS stats like the APC tools. Currently I do not know, HOW NUT triber the USB-Poert to get out the infos of the UPS. In theory I do send out only arround 5-60 lines of data which then NUT or any other programs must parse or something

Hello, since I had delayed the programming of the UPS Device part, now it is time to continue... My Device is "24 V DC modular ATX PSU" which replace the standard ATX Power Supply in PCs and use 15-43 V Input Voltage. The microcontroller is a TI LM3S5T36 Cortex M3 and I get the "UPS" infos using up to 4 Maxim DS1780 and some I?C current sensors. The ATX PSU has 4

Hello *, I have my "24V DC modular ATX PSU" running yet and it collect already the data form the DS1780 and MAX1036/8. The Microcontroller is a Maxim Integrated Device DS89C450 and the USB-Controller a MAX3420E which works over SPI Bit-Banging. OK, this is now working and enumeration is done... ;-) Now since the PSU is a "Function" I was looking into the Linux

Hello *, I have an All-In-One intranet server <samba3> and usualy a seperated <router> as default gateway, which connect me using HSPA to the internet Now I have installed an Huawai K3765 on my <samba3>, installed "pppd" + usb-modeswitch and removed the default gateway to <router>. OK I can continue surfing trough the <router> and <samba3> is

I've recently been working a bit on adding PDU (http://en.wikipedia.org/wiki/Power_distribution_unit) support in NUT. Some of you might have seen the Powerman thread, which also deals with adding more PDUs support: http://powerman.sourceforge.net/supported.html The result is that we now have support for 2 Eaton | Powerware ePDUs (Managed and Monitored iirc, check http://www.epdu.com). I plan

Hello Xen-Users, I am running a Debian GNU/Linux Devel-Station (P2/366 MHz, 512MByte) and use currently chroots which give some problems from time to time. I have following configuration: ----8<------------------------------------------------------------------ /dev/sda1 / 7700 GByte # Master System /dev/sda2 swap 256 MByte # Master System /dev/sda3 /var 512 MByte # Master System

Hello people, I am having difficulties figuring out the POE power draw in watts from a Polycom IP601. I want to know how many IP601's can be powered from the Cisco Catalyst 3560G-48PS. The IP601 wallwart has: Input 120VAC 60hz 19W, Output 24VDC 500mA. I assume the output is appropriate value to figure out how many phones can be powered. The Cisco 3560 datasheet says "the 48-port PoE

Can someone please tell me how to configure Centos/Linux so it shuts down properly by pressing the Power button on the ATX cabinet, just as if someone had given a shutdown -h now command. With regards. Sanjay.

Hi, haven't found anything in google's, i wonder if there is a comparative page of what to expect from running * on motherboards like the EPIA and similar ones. Since i have not used *ever* such kind of mini atx form factor boards, I have no clue about their performance. SIP-SIP communications, voicemail SIP-TDM communications, voicemail how may users (SIP hardphones and analog phones

Hello, I am looking for ideas and suggestions. I want to use a 16 port GSM gateway as a trunk for outbound/inbound. I will also have two PSTN phone lines coming into the Asterisk server. All calls will go to an IVR on the Asterisk PBX. Outbound from extensions will route to GSM-GW when the dialed number matches a pattern set in the GSM-GW trunk. And accordingly for the PSTN trunks. But that's

It would be useful if defining headers (either Setext and atx style), if Markdown would also generate corresponding anchors: ## This is an H2 ## would create: <a name="This is an H2"/> <h2>This is an H2</h2> Or something like that. Or is that available some different way? Thanks, Jeremy C. Reed

Sorry for posting again, but because the subject.Hi All, I have 5 servers each: Intel Quad Core i7 2.4Gig (8 processors)2 *1TB HDD2*1Gig NIC12G RAM I installed XCP 0.5 on each and all are joining a resource pool.Then I installed 2 Centos 5.5 VM on each XCP host and I used the following command to specify the number of vCPUs for each VM: xe vm-param-set uuid=$VM_UUID VCPUs-max=4xe vm-param-set

Hi, I have just upgraded my computer to Intel Core i5-4430 Quad Core @ 3.0 GHz (supports VT-d), ASRock B85M Pro4 micro-ATX LGA1150 motherboard (supports VT-d), 8 GB Kingston DDR3-1600 memory and Cooler Master Elite 311 ATX casing (all for SGD$501). I made my computer upgrade on Independence Day 4th July 2013. I have also flashed the UEFI BIOS of ASRock B85M Pro4 motherboard to version 1.50.

Hi Guys, asterisk drive me crazy! Now I have tried to use FreePBX but it require MySQL which I can not install du to a conflict with PostgreSQL. Does someone know, how to configure FreePBX to use PostgreSQL? Or does someone know another Asterisk Web-Frontend, without Database? It is realy not funny, to force users to install this monster on an ARM Microcontroller. I need only enterprise

(CC-ing to mailinglist that is about syslinux and extlinux) On Thu, May 11, 2006 at 02:24:33PM +0200, Michelle Konzack wrote: > Am 2006-05-09 15:22:29, schrieb martin f krafft: > > also sprach Michelle Konzack <linux4michelle at freenet.de> [2006.05.07.1442 +0200]: > > > 2) mkdosfs -F 16 /dev/sda1 > > > 3) syslinux /dev/sda1 > >

* Is there a way to configure NUT so that it recognizes the huge additional battery pack that has been attached to the 2200XL? The 51minutes runtime is a number consistent with the load we have placed on a stock standalone 2200XL. With the extra large battery pack we've added, the runtime should be more than 2.5 hours. * I see the "Bizzare configuration" graphic on the

Hi guys, I found the troblue and fix it! I attached the patch. The trouble was in the command reply buffer use. You compute the value that value = reply[6]*256+reply[5] <- it's wrong The right solution: value = reply[5] * 256 + reply[6]; And other bug, battery.runtime compute, you divide this value 60 <- it's wrong right value: divide 1.0 I continue the work on this

We have an HP blade enclosure for SL230s Gen 8. Went to replace the four PSUs in it, 1500W. Got them from one vendor, "refurbished"... and *none* worked. Returned them, and got them from another vendor, and *none* worked. Something odd here. For one, the LED doesn't light up when I'm holding the PSU and plug it in. Then there's something I just noticed late yesterday: in the

Just noticed that our new server has a newer 80+ efficiency 865W PSU with PFC. So apparenty our existing 1500VA (865W) APC Back-UPS is not safe to use anymore. We apparently need a pure sine wave UPS. http://nam-en.apc.com/app/answers/detail/a_id/8883 I found an affordable 1500VA UPS by CyberPower, model CP1500PFCLCD, which has a pure sine wave output. Wondering if anyone has experience with