similar to: TrippLite OmniVS1000 not recognized?

> > > 2.117586 send_cmd(msg_len=2, type='G') > > 3.219418 libusb_get_interrupt: Connection timed out > > 3.219474 libusb_get_interrupt() returned 0 instead of 8 while > sending 3a 47 b8 0d 00 00 00 00 '.G......' > > 4.219593 libusb_get_interrupt: Connection timed out > > 4.219661 libusb_get_interrupt() returned

Hi, I've been trying to get my new Tripplite OmniVS100 UPS (USB Connection) to work on my system. What I have is: Ubuntu 10.04 Server Nut 2.4.3 /etc/nut/ups.conf [omni] Driver = tripplite_usb Port = auto Desc = "My Server" /etc/nut/nut.conf MODE=standalone Iget the following error when using the > sudo upsdrvctl start Network

Hi, my nut version is 2.2.2-6.4, debian lenny The ups we use is a tripplite OMNIVS1000 USB The drivers i tried are tripplite_usb and usbhid-ups, googled very long about the problems, but didn't get it to run. Does someone has experiences or similar problems? lsusb and lsmod are all right in /etc/udev/rules.d/52_nut-usbups.rules I found one line according to the modell ---- # Tripp Lite -

Good afternoon, I'm trying without much success to monitor a Tripp Lite OMNIVS1500XL using NUT. I checked the compatibility list and saw that this UPS is supported by tripplite_usb. The system is running Debian Stable, but I've downloaded NUT 2.0.3 and compiled from source since the packaged 2.0.1 doesn't include tripplite_usb. I compiled --with-user=nut. My first attempt at

Using this UPS in the UK on 240V mains. Connected via USB: Bus 001 Device 002: ID 09ae:0001 Tripp Lite Requires tripplite_usb driver as it is (Product ID: 0001). There is an entry in the compatibity list for OMNIVS800 USB (protocol 2012) using usbhid-ups which is little misleading (although I guess maybe correct for some instances of the UPS). OMNIVS1000 USB (older; product ID: 0001) is

I am running Debian Etch, with the nut 2.0.4 packages, and I get a segmentation fault from tripplite_usb. # /lib/nut/tripplite_usb -u root -DDDDD auto Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.6 (2.0.4) Warning: This is an experimental driver. Some features may not function correctly. debug level is '5' Checking device (09AE/0001) (002/004) - VendorID: 09ae -

On Sep 25, 2014, at 5:51 PM, Dave Williams <dave at opensourcesolutions.co.uk> wrote: > Using this UPS in the UK on 240V mains. > > Connected via USB: > Bus 001 Device 002: ID 09ae:0001 Tripp Lite > > Requires tripplite_usb driver as it is (Product ID: 0001). There is an > entry in the compatibity list for OMNIVS800 USB (protocol 2012) using > usbhid-ups which is

On 22:17, Thu 25 Sep 14, Charles Lepple wrote: > > I think the OMNIVS800 protocol 2012 entry came from Tripp Lite test results. (There have definitely been naming collisions in the past; hence, the messages in the drivers if you accidentally choose the wrong one.) > > Confusingly, if the USB ProductID is 0001, the Tripp Lite specific "Protocol" number (shown in

I'm having problems creating a UPS connection to my Tripp Lite UPS System: Ubuntu 8.04.2 Nut 2.4.1 freshly compiled from source. When I do upsdrvctl start everything appears to work and I get :Detected a UPS: TRIPP LITE/TRIPP LITE UPS Using OMNIVS 2001 protocol (2001) Unit ID not retrieved (not available on all models) Attached to Tripp Lite UPS But

Hello, I have a TrippLite SMART1500RMXL2U that I'm trying to get running with Nut 2.2.1. Running upsdrvctl start works, upsd works, but upsc has "issues": je-nas:~/src/nut-2.2.1# upsdrvctl start Network UPS Tools - UPS driver controller 2.2.1- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11 (2.2.1-) Warning: This is an experimental driver. Some features may not

Hello, I've got Tripplite Smart Int 1000 UPS with lan4.1 serial interface. Quite sympathetic UPS, I must say from first glance. I have made a proper serial cable (btw i hate all those constructor's decisions to make distinct serial wiring for each and every UPS type from each and every manufacturer!) I use [tripplite] driver for NUT and I can use upsc to get report from UPS, but

I keep getting this kind of stuff in /var/log/messages Jan 18 17:45:03 bulldog tripplite_usb[9979]: libusb_get_interrupt() returned -110 instead of 8 Should I be worried about it? upsc seems to work fine... I tried building the 2.0.5 but none of the included spec files seemed to work with opensuse 10.2 and adapting their 2.0.4 spec file didn't seem to work out well either. Building from

I keep getting this kind of stuff in /var/log/messages Jan 18 17:45:03 bulldog tripplite_usb[9979]: libusb_get_interrupt() returned -110 instead of 8 Should I be worried about it? upsc seems to work fine... I tried building the 2.0.5 but none of the included spec files seemed to work with opensuse 10.2 and adapting their 2.0.4 spec file didn't seem to work out well either. Building from

I have added preliminary support for the TrippLite protocol number 2001 into tripplite_usb.c. The attached file is supplied as a patch against today's SVN. This patch adds support for TrippLite SMART550USB and some Omni models. Tested are On Line, On Battery, Battery Good, and Battery Bad indication. Everything else seems to work, but this UPS is attached to a critical system, and I can

As I understand it from looking through the archives of this mailing list and the source for the driver, tripplite_usb should work for this device. I tried to go through the source as best I could to see if I could add support myself, but got a bit lost. Anyhow, here's hoping that someone has some experience with this model. My system is using the latest CVS checkout of the Development branch

I'm running FreeBSD 6.2 with Nut 2.0.5 installed from ports... I have a TrippLite OmniVS1500XL plugged in, but I'm having little luck with the tripplite_usb module. I have already built and booted a new kernel with UHID disabled so that libusb can grab /dev/ugen0. At first I was able to get the following out of the driver: # USB_DEBUG=5 /usr/local/libexec/nut/tripplite_usb -u root

Hi, I'm running the latest version of NUT and with the above UPS and I keep getting the following error: "tripplite_usb[3308]: Error reading B value: Device detached? (error 0: could not claim interface 0: Device or resource busy)" The device keeps disconnecting and re-connecting until fails. I've tried to see if others are getting this - but I could not locate a

Hello, We have a Tripplite SMART1500RMXL2U and nut-2.2.0-6.el5 installed on Centos 5.3. I've been unsuccessful on getting upsmon to work. usdrvctl seems to start despite some warnings/errors: # upsdrvctl start smart1500 Network UPS Tools - UPS driver controller 2.2.0- Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.0-) Warning: This is an experimental driver. Some

I'm trying to get a SMART2200CRMXL to work with nut, using a USB cable. tripplite_usb -a upsname returns: Network UPS Tools - Tripp Lite OMNIVS and SMARTPRO driver 0.11.1 (2.2.2) Warning: This is an experimental driver. Some features may not function correctly. No matching USB/HID UPS found My system info: CentOS 5.5 nut installed from repo upsd version 2.2.2 TrippLite SMART2200CRMXL

Hi, I'm running Fedora Core 6 and need to monitor a Tripp Lite SMART2200RMXL2U. I've loaded the nut-2.0.3-2.1 RPM. The UPS is connected via the provided USB cable, and that much appears to work: # dmesg | grep -i tripp hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RMXL2U ] on usb-0000:00:1f.4-2 # lspci | grep -i usb 00:1f.4 USB Controller: Intel Corporation 82801BA/BAM