similar to: Problems with SATA DVD+-RW drive

I am migrating from Fedora 8 to CentOS 5.2 I have usb dvd On F8 I have /etc/udev/rules/00-my-custom.rules BUS=="scsi", SYSFS{vendor}=="TSSTcorp", SYSFS{model}=="CDDVDW SH-S203N ",SYMLINK="dvd",OWNER="rray" When I plug in dvd I get $ ll /dev/scd1 lrwxrwxrwx 1 root root 3 Aug 25 08:17 /dev/scd1 -> sr1 ll /dev/sr1 brw-r----- 1 rray disk 11, 1

Hello It is my first question here and I would like to thanks all of you to keep alive this stream and to give answers (I regulary read). Thanks for the good job. After installing CENTOS4.2 and "play with" I type the command swapon -s to verify everythings is ok but the command does nor return info as it should do. Is it something known ? Thanks Jean-Pierre Castello HP France mobile :

Dear All I tried to mount an external cdrom on my CentOS 5 server but un-successful . I attached the device to my USB port and then the followings have been added to my /dev folder : "cdrom -> scd0 cdrom-sr0 -> scd0 cdrw -> scd0 cdrw-sr0 -> scd0 cdwriter -> scd0 cdwriter-sr0 -> scd0" To this end , I tried to mount it as the followings (but it didn't get through) :

Hello everybody I would like to build a bootable CD from my running SuSE 7.3 Kernel 2.4.10. The goal is to have a prebuilt system on CD which would install everything from a compressed image on the same CD, some kind of an emergency or initial setup CD. So I startet with an directory called root_tree, placed the isolinux directory and the binaries there. I copied the initrd from the /boot

Dear list members, I have a DVD writer /dev/scd0 which after reboot has the following ACL: brw-rw---- 1 root disk 11, 0 Sep 9 2004 /dev/scd0 However I want to set this device group to "Domain Users" in order to enable its members to burn DVDs. If i invoke: #chgroup "Domain Users" /dev/scd0 the next reboot will override the group back to "disk". Is

Hi e, I am normally use gnome and would do the following to make my CD / DVD mount with exec gnome-mount --write-settings --device /dev/sdc0 -o exec What is the equivalent in KDE ? My initial research suggests that I actually have to write a custom udev rule to achieve this. This has led me as far as running udevinfo -q path -n /dev/scd0 udevtest /block/sr0 (the output is below) My

I can change the group ownershipp of the DVD drive, but if I log out & in again it changes back. Is there a way to make a change permanent? How could I figure out what process is changing this back? ls -la /dev/scd0 brw-rw---- 1 root mail 11, 0 Nov 12 15:17 /dev/scd0 mahalo, Dave

Installing matlab on Centos5. command I typed: /media/MATHWORKS_R2009A/install & Error message I received: [1] 10759 [root at taro matlab]# bash: /media/MATHWORKS_R2009A/install: /bin/sh: bad interpreter: Permission denied Google found no hits with this precise error message, but several similar hits when I leave out the matlab path. Solution: mount -o remount -o exec /dev/scd0 (scd0 is

Hi, I am running Centos 4 (fully updated on this box). I removed the old DVD writer (/dev/hdc) and installed a new LG GH20 "Internal Super Multi DVD Rewriter" with a SATA interface - this shows up as /dev/scd0. When I insert a pre-recorded DVD autorun mounts it and displays the contents without any hassles. It appears to me that the required kernel modules are loaded - as copied

hi, i''m using ubuntu edge 6.10. i''d like to test the debian lenny guest with the partition: /dev/sdb5 / /dev/sda8 swap /dev/scd0 cdrom lenny.iso /home/iso/lenny.iso i succeded running edge-guest, windows-guest, but i can''t with debian here''s my config: 2.6.17-6-generic-xen0 xen-hypervisor-3.0-i386 and kernel =

So right now I have installed k3b on this notebook. I am using my Storix DVD/CDRW usb drive. I can read cds with it. Cannot burn CDs. First k3b suggests slowing down (from 8x to 4x). Then use TAO. Then it gave up. So I try cdrecord directly. -checkdrive finds some interesting things. Got to close the drive manually; cdrecord says it can't. then try a cdrecord -v dev=dev/scd0 sample.iso

On the system I'm testing with the CD-Rom drive is IDE but the softlink at /dev/cdrom points to the scsi device and that's not working with the automounter for some reason. Each time I reinstall I have to delete the soft link and recreate it pointing at /dev/hda instead. > -----Original Message----- > From: centos-bounces at centos.org > [mailto:centos-bounces at centos.org]

When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard basically an Nforce 410/430 chipset then network is not initially detect to perform a network install. It let me attempt to manually select a driver but I do not see the driver in the list. After installing the network works and the forcedeth driver is loaded. Is there a way to get this driver detected or manually loaded? THanks,

https://bugs.freedesktop.org/show_bug.cgi?id=90967 Bug ID: 90967 Summary: System freeze using nouveau Product: xorg Version: unspecified Hardware: x86-64 (AMD64) OS: Linux (All) Status: NEW Severity: normal Priority: medium Component: Driver/nouveau Assignee: nouveau at

I have a new biostar motherboard with nvidia chipset. The lspci says MCP51 ethernet. The module was not detected although for FC4 installs it says it works. What is the network module name for the MCP51 driver so that I can try loading it manually. CentOS 4.2 Thanks, Jerry

Hi List, I must be going mad or something, but got a really odd problem with NFS mount and a DVD rom. Here is the situation, /dev/md7 58G 18G 37G 33% /data which is shared out by NFS, (/etc/exportfs) This has been working since I installed the OS, Centos 4.4 I have a DVD on that is device /dev/scd0, which I can mount anywhere I like, no problem. However, the problem

I tried to use cdrom in domU linux pv (Linux Mint 11 based on Natty). With ''/mnt/vm/iso/test.iso,raw,xvdb,ro,cdrom'', Mint sees it as internal disk (not cdrom) and only administrators can mount it. I tried also ''/dev/scd0,raw,xvdb,ro,cdrom'' does the same thing. Is possible use cdrom on linux domU pv full working where also normal user can mount it without

I'm still trying to get xen working before Centos 6 and KVM just for experience. I seem to be able to do most of what I what with VMs, but I've run into another problem with CD/DVDs. I can get a DVD mounted on the host domain just fine, but when I try and attach-block to a running guest VM, the entire server reboots. I've tried many different commands versions based on what Google

I just bought an HP DVD Writer 1040r (as identified by k3b), an external USB-connected CD/DVD burner. The drive gets assigned /dev/scd0. I can burn CDs and DVDs, read from CDs and DVDs, boot from DVDs (and, I assume, CDs) but have been unable to use the lightscribe software to label a disk. I have lightscribe-1.18.11.1-0 and lightscribeApplications-1.18.6.1-0 installed, can run the GUI at

Hi. I'm trying to back up from an ext3 filesystem to an IOMega Rev USB cartridge drive, which uses a UDF filesystem. It appears to the system as /dev/scd0, but can be mounted in R/W mode. I get a bunch of errors like this: rsync: mkstemp "/media/usb/backup_dir/home/support/data-old/clipart/STANDARD/STDDIR3/.PE01617_.WMF.M9ACqm" failed: Input/output error (5) There are