similar to: [LLVMdev] Request documentation for global var syntax

int %nlz10(uint %param.x) { %.t3 = shr uint %param.x, ubyte 1 ; <uint> [#uses=1] %.t4 = or uint %.t3, %param.x ; <uint> [#uses=2] %.t7 = shr uint %.t4, ubyte 2 ; <uint> [#uses=1] %.t8 = or uint %.t7, %.t4 ; <uint> [#uses=2] %.t11 = shr uint %.t8, ubyte 4 ; <uint> [#uses=1]

On Thu, 11 Jan 2007, Schimmel, Mark wrote: > file://docs/LangRef.html#globalvars > > The section describing the definition of global vars discusses that you > can specify an alignment and can also specify a section. Could someone > provide an example that works in gccas in release 1.9 for both defining > which section the var is assigned to and defining the variables >

But isn't kinda silly that we transform to xor and then we transform it back. What is the advantage in doing so? Also, since we do that method, I now have to introduce setcc patterns for i1 values, instead of being able to just use logical pattern operators like not. -Dilan On Fri, Jul 21, 2017 at 11:00 AM Dilan Manatunga <manatunga at gmail.com> wrote: > For some reason I

Hi, I am having some issues with how some of the instructions are being legalized. So this is my intial basic block. The area of concern is the last three instructions. I will pick and choose debug output to keep this small. SelectionDAG has 36 nodes: t0: ch = EntryToken t6: i32,ch = CopyFromReg t0, Register:i32 %vreg507 t2: i32,ch = CopyFromReg t0, Register:i32 %vreg17

Hi, I am having issues running a new backend that I created for a new architecture. I suspect these errors may have something to do with how I have the string setup in LLVMTargetMachine() below? Also - It would be great if someone could point me to a document that describes some of these error messages? For example what does t26 ..t4 mean? Thanks in advance for taking your valuable time to help

Hello. I'm having problems at instruction selection with my back end with the following basic-block due to a vector add with immediate constant vector (obtained by vectorizing a simple C program doing vector sum map): vector.ph: ; preds = %vector.memcheck50 %.splatinsert = insertelement <8 x i64> undef, i64 %i.07.unr, i32 0

Hi, Is there a kind of scope mechanism in the instruction lowering pattern language in order to control where instructions are inserted or how they are later reordered during the SelectionDiag linearization? I know the glue chain that stick instructions together. But such mechanism in not provided in instruction lowering pattern. I'm facing many situations where some patterns are lowered into

The DAG dumping will try to print some of the nodes "inline" (i.e. where they are used) to make the output more readable, so the dump of the DAG may not strictly reflect the node ordering. -Krzysztof On 5/4/2018 8:18 AM, Dominique Torette via llvm-dev wrote: > Here is a last example to illustrate my concern. > > The problem is about the lowering of node t13. > >

Here is a last example to illustrate my concern. The problem is about the lowering of node t13. Initial selection DAG: BB#0 '_start:entry' SelectionDAG has 44 nodes: t11: i16 = Constant<0> t0: ch = EntryToken t3: ch = llvm.clp.set.rspa t0, TargetConstant:i16<392>, Constant:i32<64> t5: ch = llvm.clp.set.rspb t3,

Krzysztof, Thanks for your interest to my questions. In order to clarify the context, here is the C source file of my test case. The 3 builtins initialize some stack pointers. They have to be executed before any other instruction. extern float fdivfaddfmul_a(float a, float b, float c, float d); volatile static float x1,x2,x3,x4; void _start(void) { float res;

Hi Krzysztof, Sure, please see below. DAG.dump.() before and after, annotated with what I believe the DAG means. I've spent some time debugging the method but it's proving difficult to determine where the logic is misfiring. Disabling the entire combine causes a lot of failing x86-64 tests - I may have to learn an upstream vector ISA to make progress on this. Thank you >From your

I see we're missing an isel pattern for add producing carry and doing a memory RMW. I'm going to see if adding that helps anything. ~Craig On Mon, Feb 27, 2017 at 8:47 PM, Nirav Davé via llvm-dev < llvm-dev at lists.llvm.org> wrote: > Yes. I'm seeing that as well. Not clear what's going on. > > In any case it looks to be unrelated to the alias analysis so barring

I have the following selection DAG: SelectionDAG has 9 nodes: t0: ch = EntryToken t2: i64,ch = CopyFromReg t0, Register:i64 %vreg0 t16: i32,ch = load<LD1[%ptr](tbaa=<0x10023c9f448>), anyext from i8> t0, t2, undef:i64 t15: v16i8 = BUILD_VECTOR t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16, t16 t11: ch,glue = CopyToReg t0, Register:v16i8 %V2, t15

Hi, R-users, I met a problem: Items:[Anna 'moi =) akku loppu joskus 4ltä. Kestää kauan nää..'\tAmer, Tuusula (0:20)\t20\t12\t16\t00\t00\t11]/Anne 'Ei jakoa,uus päivä muistio et 4n niin peruin. Hups'\t (0:16)\t0\t12\t18\t00\t00\t11/Elina 'Konsertissa. En tod. vastaa teille'\tEtu-Töölö, Helsinki (2:40)\t24\t12\t18\t00\t00\t11 I want to parsing the above data into the

Have you read http://llvm.org/docs/WritingAnLLVMBackend.html and http://llvm.org/docs/CodeGenerator.html ? http://llvm.org/docs/WritingAnLLVMBackend.html#instruction-selector describes how to define a store instruction. -Eli On 7/6/2017 6:51 PM, hameeza ahmed via llvm-dev wrote: > Please correct me i m stuck at this point. > > On Jul 6, 2017 5:18 PM, "hameeza ahmed"

Question for 'experts' in LP using R (using the lpSolve package, say) -- which does not apply to me for the sort of problem I describe below. I've run any number of LP's using lpSolve in R, but all of them to date have objective and constraint functions that both contain the same variables. This lets you set up a LHS and RHS matrix/vector that are symmetrical. But, for a

Apart from the fact that the statement "such that t1+t2+t3+t4=2970 (as it must)" is not correct, the LP can be implemented as follows: library(lpSolve) LHS <- rbind( c(0,0,0,0, 1, 0, 0,0), c(1,0,0,0,-1, 1, 0,0), c(0,1,0,0, 0,-1, 1,0), c(0,0,1,0, 0, 0,-1,1), cbind(-diag(4),diag(4)), c(0,0,0,0,0,1,0,0), c(0,0,0,0,0,0,1,0), c(0,0,0,0,0,0,0,1) ) RHS <-

Hello, i am experimenting with the increase in register/ vector width to 64 elements of 32 bits instead of 16 in x86 backend. for eg. i have a loop with 65 iterations; if my IR generates v64i32 and 1 scalar, still the backend breaks the v64i32 into 4 v16i32. i want it to retain v64i32. like if there are 128 elements in loop then it should break it into 2 v64i32 instructions. in order to do this i

Hi List, I have start and end times of events structure(list(start = c("15:00", "15:00", "15:00", "11:00", "14:00", "14:00", "15:00", "12:00", "12:00", "12:00", "12:00", "12:00", "12:00", "12:00", "12:00", "12:00", "12:00",

Thanks a lot for the suggestions! I will look into using vld1/vst1, sounds good. I am custom lowering the bitcasts, that's now the only place where FP_TO_FP16 and FP16_TO_FP nodes are created to avoid inefficient code generation. I will double check if I can't achieve the same without using these nodes (because I really would like to get completely rid of them). Cheers, Sjoerd.