similar to: Big devices and missing space

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

> > Well, i''m using here the qla2340 on several boxes. It works > > with Xen 2.0 but noch with Xen 3.0. as part of SUSE Linux 10.0: > > Interesting. If the driver really doews work flawlessly in > Xen 2, then I think the culprit has to be interrupt routeing. > > Under Xen 3, does /proc/interrupts show you''re receiving interrupts? I cannot boot with

Hello, I have a weird problem after adding new PV do LMV volume group. It seems the error comes out only during boot time. Please read the story. I have couple of 1U machines. They all have two, four or more Fujitsu-Siemens SAS 2,5" disks, which are bounded in Raid1 pairs with Linux mdadm. First pair of disks has always two arrays (md0, md1). Small md0 is used for booting and the rest - md1

Basically the issue comes down to my Volume Groups not being found by this initrd, causing good ole kernel panic. initrd-2.6.12.6-xen3_12.1_rhel4.1.img [root@xen01 lvm]# uname -a Linux xen01.inside.***.com 2.6.9-22.0.2.ELsmp #1 SMP Thu Jan 5 17:13:01 EST 2006 i686 i686 i386 GNU/Linux [root@xen01 lvm]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 2) Everything

So I'm working with the iSCSI Initiator and an EqualLogic SAN. I'm not sure when this might have happened, but it appears that the /dev/sdc device is missing, yet the /dev/sdc1 partition exists AND is mountable. Is there a method to re-create the /dev/sdc device? I cannot dd or fdisk it, obviously, but I can mount the /dev/sdc1 partition and it works just fine. Not having the /dev/sdc

Hello List, I'm hoping someone else out there has an Asus DSBF-DE server board, and can tell me if anything special needs to be done to get ports 5 and 6 of the onboard SATA to work under Centos 5.1 x64. I have drives on 1 through 4 that are detected and working properly, however, a drive on 5 is not detected, from what i can tell, the kernel doesn't even see phy's for ports 5 and 6.

I really hope someone has a clue on this one.... :) I've got a 2.2TB array mounted on a 3ware 9500 controller. I installed it last week ensuring that LBA was enabled and using gpt with parted to get the full size available on one array. I also think I chose reiserfs for the array. We then moved ALOT of data to the array. Problem now is that after a reboot LBA doesn't seem to be in

Hi folks, Backing up a host as noted below im getting over and over again the same issue on actual kernel, details: - Backup host has a pci/usb2.0 card, with a 250gb usb 2.0 disk attached, - Celeron 900 family - Remote host, local console from boot linux rescue: # dd if=/dev/hda conv=sync,noerror | ssh -c blowfish root at 192.168.0.6 "dd of=/media/backup/vol-hda.raw.img" - Backup

Hi, I've installed Samba a few times, and I always have the same problem - except now I really want to get rid of it. My Samba server is very, very, very slow on occations (not always), and some times it's really annoying. What happens is that it doesn't seem to be online for a period of 5-10 seconds once every minute! If I'm copying huge files, it's working great, but when

Hi, i'm trying to create an ubuntu live-pendrive using this tutorial http://www.pendrivelinux.com/2007/02/12/usb-ubuntu-tutorial-for-linux-users/ I have a 2GB USB Pendrive. When I insert the pendrive, /var/log/messages says: kernel: usb 5-5: new high speed USB device using ehci_hcd and address 35 kernel: usb 5-5: configuration #1 chosen from 1 choice kernel: scsi13 : SCSI emulation for USB

i'm trying to set up a hardware RAID array (eRAID from DatOptic) under CentOS. we have two more of these arrays which have worked very well for their purposes (backup and/or portable storage), but neither of our older arrays exceeded the dreaded 2TB barrier (one of them is, in fact, 2TB). the server i'm currently testing with is running CentOS4.5, but i do have CentOS5

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

I have problems connecting IPSEC VPN clients on the masqueraded network to outside VPN servers. It looks like this: ipsec-user | 192.168.1.10 (DHCP assigned) | | 192.168.1.1 fw-1 (shorewall, Linux 2.6) | 20.20.20.20 (internet) | 30.30.30.30 fw-2 (IPSEC VPN endpoint) | 192.168.100.1 | | 192.168.100.2 server ipsec-user (a road warrior) is supposed to create an IPSEC tunnel to his home

Hi all, I'm sure this eventually will be resolved with a BIOS or kernel update, but in case someone experiences this on this or a similar motherboard, I thought I'd post a problem-and-workaround report. Platform CentOS5, x86_64 kernel-2.6.18-53.1.21.el5 Motherboard Asus M3a78-EMH HDMI SATA-controller configured as AHCI Experienced symptom; Periodic, ~20s lockups/freezes, several a

A friend bring and Ipod, initially it didn't start because of charge, so I connected to my PC to give some charge, after that my linux didn't mount it, and when I start the iPod it shows me a folder with a sign, and that's all, nothing else matters. when I connected the iPod to the PC it start to charge and suddenly stops and shows the folder I have talked before I run the command

To this point, whenever I've plugged a storage device (flash drive, mp3 player) into a USB plug, it's magically mounted and I get an icon on my desktop. I've just got a card reader and it doesn't automount. I can mount it manually with "mount /dev/sdb1 /mnt/temp" and that works fine. I would prefer to have it automount and give me the desktop icon. Unfortunately, I

I've rebased the patch series to the current next branch and am sending them again.

hi, we've got a server with 6 sata disk (2 system raid1, 4 data raid5). recently we've got such error is the log and in these case the system is totally hang ie. it seems to crash but after 30-40 sec is start to working. we already 2 times replace the sata cables the problem still arrise what's more with different data disk (so not the same). we assume it can be some kind of sata

I upgraded my storage server this morning from 5.5 to 5.6 and have quite a few issues with servers attaching to the iSCSI target... 1) Prior to the upgrade, I had our initiators configured with a username and password with CHAP and after the reboot I began having issues mounting their LUN. Looking through the logs I see: CHAP initiator auth.: authentication of

Running Samba 2.2.7, compiled with LDAP support. I'm suffering from really poor read performance problems on the server. Write speed is fine (after adding "interface = <ip of eth0>/24"), giving about 4.4 MB/s. However, reading files from the samba shares is just not usable. Reading a large (34 MB) file from the server takes more than 3 minutes on a W2K Pro client. NIC on both