similar to: Sysylinux-6.03 freezes at Loading kernel..., works smooth with 4.06 via SD-CARD

Hi, First of all thank you so much for your prompt suggestions/help. I really appreciate this. Here is the syslinux.cfg which works perfect with syslinux-4.06 ---- PROMPT 0 TIMEOUT 50 SERIAL 0 DEFAULT mylabel LABEL mylabel KERNEL vmlinuz0 APPEND initrd=initrd.img root=/dev/mmcblk0p2 rootwait rootfstype=ext3 console=tty0 console=ttyS0,9600 ---- To further round off the error possibilities I used

> > Hi > I have tried to install syslinux 4.06 on the SD card again, it works > like a charm. > > I am being very carefull with c32 files from the same version > bootloader. No success. > > I am also unmounting /dev/sdb1 before installing syslinux, as mentioned > in the given documentations. > In the pasted syslinux.cfg content--- I have also tried using only

Hi I have tried to install syslinux 4.06 on the SD card again, it works like a charm. I am being very carefull with c32 files from the same version bootloader. No success. I am also unmounting /dev/sdb1 before installing syslinux, as mentioned in the given documentations. In the pasted syslinux.cfg content--- I have also tried using only one DEFAULT directive. No success. syslinux boots

> Hi, > I am trying to boot syslinux with an SD-Card on COMe-mBTi10 board, it works > perfect with syslinux 4-06(as BIOS supports booting from SD-CARD), but > hangs with syslinux-6.03 during 'Loading vmlinuz ... '. > I tried various ways in which I could debug but no hints, just one time I > got the error below the loading screen. > > 'Loading vmlinuz0 ... CHS:

Hi I am running a pxe diskless node in f13 and I have some proposals to make ovirt-early working in this version. nash is no more available (nash/mkinitrd is replaced by dracut), so this following command fails : "echo "network --device $DEVICE --bootproto dhcp" | nash" it makes the network configuration incomplete. I replace the linuxrc command by dhclient and it's

Hi, In the Bios folder inside mbr, there are different types of mbr_c.bin mbr_f.bin as well as mbr.bin, is there a description available which tells which mbr is to be used in which case? please point me to the description or kindly explain. while installing syslinux on my device (usb, sd-card) i can use the arguments '-H' and '-S' to specify heads and sectors, these should be the

This is an issue I've researched quite a bit on bug lists, and looked in the Syslinux Wiki for a way to do this, but haven't yet found a solution. 1) I have an existing Fedora 13 LiveCD which I burned to a CD and tested on a system without issue. 2) I then took that same ISO and dropped it in my pxelinux.cfg/default for being able to boot over the network. I made sure to extract the

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

Hi All, During booting from network i am getting the following error initrd too large to handle, disabling initrd Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Size of initrd0.img is approx. 317 MB Size of vmlinuz is approx. 4 MB Following is the part of my default file in pxelinux.cfg/ label linux0 menu label MyFedora13 (default) kernel vmlinuz0 APPEND

Hi there, I just installed oVirt and cobbler (I'm 100% novice!, so this could be a 100% silly question...). I can't get my initial host into the hardware pool. It PXE boots through cobbler, then fails with message "WARNING: Cannot find root file system!" and "Create symlink /dev/root and then exit this shell to continue the boot sequence." I suspect I didn't set

This completes the switch to ext3 backed root partitions. /boot is now contained on each Root/RootBackup partition. On install grub is updated to read and boot from the correct partition as well. --- scripts/ovirt-config-boot | 29 ++++++++++++------------ scripts/ovirt-config-storage | 47 +++++++++++---------------------------- scripts/ovirt-config-uninstall | 5 +---

Hi every one, I am trying to load a custom kernel with Syslinux on special purpose pc. Surprisingly Syslinux-4.06 boots my kernel, initrd and finally the OS perfectly from an SD-Card. The problem arises when I use the Syslinux-6.03 where the syslinux hangs right at the beginning After I see the message 'Loading vmLinuz0 ...' I read a few posts on your forums and figured out it has to do

This enables the ability to take the ovirt-node-image iso and deploy it to an iscsi disk. It also provides a sample pxe configuration for booting based on the iscsi root device. Includes support for user/password as well as reverse chap user/password. --- Makefile.am | 1 + livecd-iso-to-iscsi | 201 ++++++++++++++++++++++++++++++++++++++++++++++ ovirt-node-image.spec.in |

Hi, I'm using PXELinux latest (6.03) and I encountered a very strange issue. I've converted a CentOS Live ISO to PXE, and I'm using lpxelinux.0 to boot it. Without any HTTP method in the lines, the files are transferring without any problems, but as soon as I use http, all the transferring action is super slow - 5-8 times slower compared to stanard TFTP/UDP transfer (with the same

--- scripts/install.py | 247 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 247 insertions(+), 0 deletions(-) create mode 100755 scripts/install.py diff --git a/scripts/install.py b/scripts/install.py new file mode 100755 index 0000000..ddffb53 --- /dev/null +++ b/scripts/install.py @@ -0,0 +1,247 @@ +#!/usr/bin/python +# +# install.py - configure local boot/root disk

Hello list, I use the livecd-creator to customize my own livecd iso. I use the kickstart config file from https://raw.githubusercontent.com/CentOS/sig-core-livemedia/master/kickstarts/centos-7-livecd.cfg. #livecd-creator -v --config centos-7-livecd.cfg --cache /var/cache/livecd finally I got a iso, but the iso is strange. The offical distribution iso is

Rich, this wasn't operational. First of all, the image on my version of RHEV-H is kept in other directory. So I did that: 1. $ export FEBOOTSTRAP_KERNEL=/dev/.initramfs/live/vmlinuz0 2. $ echo $FEBOOTSTRAP_KERNEL /dev/.initramfs/live/vmlinuz0 3. $ libguestfs-test-tool ************************************************************ *

Hello i have fedora 11 and build from next branch ovirt during boot by network (pxe) second node appear error. host stay anavailable and not sent to manage node identify data. ping return "unreachable host" Where may be error ? in /var/log/message selinux is permissive Jun 23 06:07:50 main dnsmasq[4500]: DHCPDISCOVER(eth0) 00:30:48:5f:28:40 Jun 23 06:07:50 main dnsmasq[4500]:

rhbz#733357 Signed-off-by: Mike Burns <mburns at redhat.com> --- recipe/common-nochroot.ks | 19 +++++++++++++++++-- 1 files changed, 17 insertions(+), 2 deletions(-) diff --git a/recipe/common-nochroot.ks b/recipe/common-nochroot.ks index c5d009f..c6dd76d 100644 --- a/recipe/common-nochroot.ks +++ b/recipe/common-nochroot.ks @@ -17,6 +17,9 @@ sed -i -e 's/ quiet//'

I think my oven is broken, but maybe I have the recipe wrong. I've been trying to utilize the lwIP stack and dmi information to avoid iPXE use. I can do a SYSAPPEND 0x00080 and it shows up in /proc/cmdline after booting the kernel, but tcpdump is not revealing the cookies as described during HTTP calls in the documentation. Trying the magic "SENDCOOKIES" parameter outside of an