similar to: Booting with Syslinux 6.01 & 6.02 fails, causes restart.

On Sat, Nov 23, 2013 at 5:49 AM, Evert Vorster <evorster at gmail.com> wrote: > Hi there. > > I had a quick look through the archives, and I spotted a similar issue > being reported in October, but no resolution, unfortunately. > "[syslinux] Syslinux 6.02 BIOS" > > I am booting in legacy (bios) mode on a gpt partition on my laptop. > It's a HP ENVY dv7.

>> Straight away the booting process looks different than with 4.06. >> The periods that were showing progress in loading the initramfs now >> does not increase as the initramfs is loaded. So, only three periods >> after each initramfs. > > That happened in version 5.00. Good to know that this is expected behavior. However, some sort of indication that the initramfs

Hi there... I have kernel version 2.6.36.3, compiled with gcc 4.4.5, btrfstools version 0.19+20101101 I have a btrfs filesystem (/data) consisting of two 1TB hard disks, raid0. I added in another 1TB hard drive. root@X86-64:~# btrfs filesystem show failed to read /dev/sdh failed to read /dev/sdg failed to read /dev/sdf failed to read /dev/sde failed to read /dev/sr0 failed to read /dev/fd0u800

> I compiled from sources. Where did you get the Syslinux source? Could you try with the latest from Arch Linux [testing], just in case? FWIW, the Syslinux archives in kernel.org already contain binary files. Using official files without re-compiling might help find out if perhaps there is some build problem. > First gnu-efi, then syslinux. I can provide compile logs if you are

Hello My name is Marcin, I am pleased to write here ; -) a have some problems with syslinux. I hope that you will help. On my company we use the syslinux from a long time. Now we use the sys(pxe)linux 4.06 and working very well. Yesterday i starting collect the needed files for syslinux 6.02 BIOS on virtualbox 4.3. I test everything, memtest, Windows PE, ubuntu etc.. everything works well. I

Hi Thanks for confirmation about syslinux 6.02 requirements. I see small misunderstanding. A used word "Syslinux 6.02 BIOS" mean the respective syslinux binary files from "/bios" subdirectory for PC's with Legacy PXE or PC's with PXE where CSM mode is enabled. Some idea where is the issue? Do the syslinux 6.02 working well from PXE on multiple PC's in your place?

Hey, i'm using latest Syslinx 6.01 and try to get the linux kernel booted via tftp in EFI mode. My menu entry: LABEL rescue64 MENU LABEL ^1. 64-Bit Rescue-System - wheezy - 3.10.2 LINUX /rescue/dev-64/vmlinuz INITRD /rescue/dev-64/initramfs.cpio.gz APPEND ... If i select the entry i get: "Bad file number!". Over http it works like a charm. With the pxelinux.0 it works via

Hello, A couple of months back there was this message on the list. http://syslinux.zytor.com/archives/2010-October/015459.html I have exactly the same result on just a few types of machines. Acer Tavelmate 8372 and 5742 InsydeH2O Bios v1.05 Broadcom UNDI PXE 2.1 V 14.0.8 It started after I upgrades pxelinux.0 to version 3.86 Versions tested and got the recursing: 3.86, 3.85, 3.84 and 3.83 On

Attached are 4 patches against Syslinux 4.06 providing two new options for the linux.c32 ComBoot32 module. If we are shifting gears towards 4.10 or 5 any time soon, feel free to let me know and I'll attempt to apply the patches to those and to deal with any conflicts. You can merge these commits onto your 4.06 from my 'multi_initrd' branch at:

> I'm just a user of the syslinux, but did run into some issues when moving > from 4.x to 5.x and now testing 6.x. The main issue I found was that some > additional .c32 files needed to be copied to make it work. Also, making sure > that all files were from the same version, since mixing different version of the > c32 files resulted in some strange results. Thanks for the

On Thu, Oct 31, 2013 at 6:32 PM, Marcin Celebucki <marcincelebucki at gmail.com> wrote: > Hi > > Thanks for confirmation about syslinux 6.02 requirements. > I see small misunderstanding. A used word "Syslinux 6.02 BIOS" mean the > respective syslinux binary files from "/bios" subdirectory for PC's with > Legacy PXE or PC's with PXE where CSM mode

Hello, I notice a bug in syslinux 6.01 ( bios version ) when I install it in a USB flash drive ( FAT32 partition ) and when I want to boot this USB flash drive with a gigabyte motherboard ( GA-P31-DS3L ), I setup my usb flash drive ( 4 Gb ) like this in windows XP : syslinux.exe -m -a -i -d /boot/syslinux H: then I create a syslinux.cfg menu and I add these files : chain.c32 libcom32.c32

Hi, Here's a try at writing an initramfs HOWTO. This is basically a write-up of a number of interesting emails I collected over time. It could probably use an editor, more fact-checking and a bunch of other good things, but it should be better than nothing ;-) Daniel -------------- next part -------------- INITRAMFS HOWTO 0) What are klibc and initramfs? Initramfs is a ramfs into which

Hello, I recently installed chanskype on my asterisk box and it works like a dream, can phone out. But no idea how to setup the incoming calls, every time I phone my skype name it just connects and disconnect the call right away. I get the following on asterisk -rvvvvvvvvvvvvvv Verbosity was 1 and is now 14 == Sent cmd 'GET CALL 175 TYPE' to fd 18 on Skype dev 'skype1' ==

C:\syslinux>type syslinux.cfg prompt 1 timeout 1 default hello label xp com32 chain.c32 append hd0 1 ntldr=/ntldr label memtest linux memtest86+.bin label hello com32 hello.c32 C:\syslinux> syslinux command was: syslinux.exe -a -d /syslinux -f -i -m c: 1. The syslinux copyright

Op 2013-10-30 om 21:43 schreef Marcin Celebucki: > Hello > > My name is Marcin, I am pleased to write here ; -) a have some problems > with syslinux. I hope that you will help. > > On my company we use the syslinux from a long time. Now we use the > sys(pxe)linux 4.06 and working very well. > > Yesterday i starting collect the needed files for syslinux 6.02 BIOS on

Hi, The attached patch is an update to the latest klibc (I just checked a few bits into CVS) which adds support for initramfs. Since it contains bits that aren't available yet on the main site, I've also put a tarball up which contains only what's in the latest CVS. The initramfs stuff is what I use here to boot one of my machines; it works for me, but probably won't work

> -----Original Messages----- > From: "Steven Tardy" <sjt5atra at gmail.com> > Sent Time: 2018-02-26 10:48:48 (Monday) > To: "CentOS mailing list" <centos at centos.org> > Cc: > Subject: Re: [CentOS] How to update modules in iniramfs fastly > > On Sun, Feb 25, 2018 at 8:29 PM wuzhouhui <wuzhouhui14 at mails.ucas.ac.cn> > wrote:

On Mon, 8 Aug 2016 18:38:55 +0200 Pino Toscano <ptoscano@redhat.com> wrote: > Use the canonical way to regenerate the initrd images for all the > installed kernels, i.e. reconfigure the initramfs-tools which will > trigger the kernel postinst scripts. > --- > v2v/convert_linux.ml | 4 +++- > 1 file changed, 3 insertions(+), 1 deletion(-) > > diff --git

systemd supports switching back to the initramfs during shutdown in order to make it easier to clean up the root file system. This is desirable in order to allow us to remove keys from RAM before rebooting, making it harder to obtain confidential information by rebooting into an environment that scrapes RAM contents. --- debian/changelog | 4 +