similar to: [PATCH 0/5] drm/nouveau: platform devices and GK20A probing

Playing a bit with todays linux-next on my jetson, it seems this patch is still required for enabling the GPU. Is there anything blocking it (firmware not available yet in liux-firmware?) On Mon, May 19, 2014 at 06:24:10PM +0900, Alexandre Courbot wrote: > Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> > --- > arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++- >

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. This version is mostly identical to v2 but fixes an important issue: the drvdata must be set to the drm_device for sysfs to work, so the platform device structure now includes the

This series adds support for probing platform devices on Nouveau, as well as the DT bindings for GK20A. It doesn't enable the GPU yet on Tegra boards since a few extra things need to be supported before that. Thanks to the input received for v1, this version is more self-contained and shares less stuff between nouveau_drm and nouveau_platform. The major change is that nouveau_platform is now

On Thu, Sep 25, 2014 at 09:48:01AM -0600, Stephen Warren wrote: > On 09/25/2014 07:27 AM, Sjoerd Simons wrote: > >Playing a bit with todays linux-next on my jetson, it seems this patch is > >still required for enabling the GPU. Is there anything blocking it (firmware > >not available yet in liux-firmware?) > > I think initially I was waiting for the DRM patch

On 09/25/2014 07:27 AM, Sjoerd Simons wrote: > Playing a bit with todays linux-next on my jetson, it seems this patch is > still required for enabling the GPU. Is there anything blocking it (firmware > not available yet in liux-firmware?) I think initially I was waiting for the DRM patch "drm/nouvea: support for probing platform devices" to be applied, but it looks like

Signed-off-by: Alexandre Courbot <acourbot at nvidia.com> --- arch/arm/boot/dts/tegra124-jetson-tk1.dts | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index e31fb61a81d3..15a194d1277f 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++

On Sun, Oct 16, 2016 at 11:39 PM, C Bergström <cbergstrom at pathscale.com> wrote: > Is there any particular reason you're not using the open source NVIDIA > Tegra drivers? > > This is what is being used for the TX1 (Sorry I don't know if it's the > same for the TK1) > http://nv-tegra.nvidia.com/gitweb/?p=linux-3.10.git;a=summary That's ... not particularly

I hope this is a good mailing list for this problem. I have a Jetson TK1 board and I am trying to get the nouveau drivers running on it without success. I am using the following: Nouveau linux kernel 4.8.0-rc4+ Nouveau DRM git master xf86-video-nouveau git master Gnurou xserver git branch GK20A My base system is Debian. When I try to start X I get: X: drmmode_display.c:783:

Hi, This series includes some pieces of fixes to complete the GK20A power on/off sequences and add the suspend/resume support. The patches 1/11 - 4/11 are based on the linux-next-20141219. The patches 5/11 - 11/11 are based on the branch "linux-3.19" of Ben Skeggs's tree (http://cgit.freedesktop.org/~darktama/nouveau). Thanks, Vince Vince Hsu (4): (linux-next-20141219) ARM:

Hi Thierry et al. I noticed that since commit 3dde5a2342cd ("ARM: tegra: Add VIC on Tegra124") graphics on Apalis TK1 is broken. During boot it fails loading the vic firmware: [ 1.595824] tegra-vic 54340000.vic: Direct firmware load for nvidia/tegra124/vic03_ucode.bin failed with error -2 [ 1.606140] tegra-vic: probe of 54340000.vic failed with error -2 Subsequently Tegra HDMI

>> I read that nouveau supports the Jetson TK1 board: >> >> http://www.newegg.com/Product/Product.aspx?Item=N82E16813190005 >> >> Does it provide OpenGL support? > > It does: > > https://www.youtube.com/watch?v=7ZSGSVGsSwc > > This is still a work-in-progress, but glmark2 and Weston are already > running. Note that as the support is rather new

I read that nouveau supports the Jetson TK1 board: http://www.newegg.com/Product/Product.aspx?Item=N82E16813190005 Does it provide OpenGL support? - Grant

Am Montag, den 19.05.2014, 18:24 +0900 schrieb Alexandre Courbot: > This patch series is the final (?) step towards the initial support of GK20A, > allowing it to be probed and used (currently at a very slow speed, and for > offscreen rendering only) on the Jetson TK1 and Venice 2 boards. > This seem to still need external firmware. Any chance to get this into linux-firmware?

On Mon, Dec 10, 2018 at 11:21:47AM +0100, Thierry Reding wrote: > On Sat, Dec 08, 2018 at 02:54:45PM +0000, Marcel Ziswiler wrote: > > Hi Thierry et al. > > > > I noticed that since commit 3dde5a2342cd ("ARM: tegra: Add VIC on > > Tegra124") graphics on Apalis TK1 is broken. During boot it fails > > loading the vic firmware: > > > > [

On Thu, Nov 29, 2018 at 03:23:59AM -0800, kernelci.org bot wrote: Today's -next crashes on Jetson TK1 when the Nouveau module is loaded if it can't find firmware: [ 7.617291] nouveau 57000000.gpu: Linked as a consumer to regulator.33 [ 7.624037] nouveau 57000000.gpu: NVIDIA GK20A (0ea000a1) [ 7.629880] nouveau 57000000.gpu: imem: using IOMMU [ 7.635013] nouveau 57000000.gpu:

Please find below an automated bisection report for a kernel Oops seen during the initialisation of the nouveau GPU driver on jetson-tk1. All the LAVA test jobs for this bisection can be found here: http://lava.baylibre.com:10080/scheduler/alljobs?length=25&search=lava-bisect-staging-7366#table Here's the beginning of the Oops stack trace: [ 7.485361] [00000064] *pgd=f9e7b835 [

I see the following on a Jetson TK1: [ 9.495425] [TTM] Initializing DMA pool allocator [ 9.495513] nouveau 57000000.gpu: DRM: VRAM: 0 MiB [ 9.495520] nouveau 57000000.gpu: DRM: GART: 1048576 MiB [ 9.508076] nouveau 57000000.gpu: DRM: failed to create ce channel, -22 A Google search suggests that I'm not the only one with this, but I don't see it being discussed anywhere. Is

Hello Vince, One minor question inline. Op 28-11-14 om 12:13 schreef Vince Hsu: > The voltage value are calculated by the hardware characterized > result. > > Signed-off-by: Vince Hsu <vinceh at nvidia.com> > --- > > Resend this patch with the fuse change and proper patch prefix > per Thierry's request. > > drm/Kbuild | 1 + >

On 07/10/2014 06:43 PM, Peter De Schrijver wrote: > On Thu, Jul 10, 2014 at 09:34:34AM +0200, Alexandre Courbot wrote: >> This series adds support for reclocking on GK20A. The first two patches touch >> the clock subsystem to allow GK20A to operate, by making the presence of the >> thermal and voltage devices optional, and allowing pstates to be provided >> directly

Some Tegra drivers might be complied as kernel modules, and they need the fuse information for initialization. One example is the GK20A Nouveau driver. It needs the GPU speedo value to calculate frequency-voltage table. So export the tegra_sku_info. Signed-off-by: Vince Hsu <vinceh at nvidia.com> --- v2: add more description why we need this patch drivers/soc/tegra/fuse/fuse-tegra.c | 1