similar to: can PJSIP_MEDIA_OFFER work like SIP_CODEC?

Hi: I am useing asterisk 11.12. I use G722 as preferred codec for my ip-phone. and my PSTN DAHDI use alaw. G722 is great when ip-phone talks to each other. but when ip-phone dialout to PSTN DAHDI, G722 is not great, since it is need to transcode to alaw. so I try to change the codec when dial from SIP to DAHDI. I tried to use IP_CODEC/SIP_CODEC_OUTBOUND at dialplan. but the SIP

On Mon, 23 Jul 2018 14:48:00 +0800 d tbsky <tbskyd at gmail.com> wrote: > 2018-07-22 17:44 GMT+08:00 d tbsky <tbskyd at gmail.com>: > > 2018-07-19 23:59 GMT+08:00 Rowland Penny via samba > > <samba at lists.samba.org>: > >> > >> Please see inline comments. > >> > >> On Thu, 19 Jul 2018 23:44:48 +0800 > >> d tbsky

d tbsky <tbskyd at gmail.com> > > Laurent Taieb via Nut-upsuser > > > > Hello mailing List. > > > > I manage 2 UPS via NUT, an APC Smart-UPS_1500 and an EATON 5S 1500. > > > > I can get load information on the EATON but not on the APC. > > > > Actually upsc doesn?t give much information on the APC. > > > > Does someone know

On Mon, 23 Jul 2018 18:34:36 +0800 d tbsky <tbskyd at gmail.com> wrote: > 2018-07-23 18:01 GMT+08:00 Rowland Penny via samba > <samba at lists.samba.org>: > > On Mon, 23 Jul 2018 17:19:07 +0800 > > d tbsky <tbskyd at gmail.com> wrote: > > If, as it sounds, you were altering the users primaryGroupID > > attribute, then you should not have been doing

On Mon, 23 Jul 2018 17:19:07 +0800 d tbsky <tbskyd at gmail.com> wrote: > 2018-07-23 17:02 GMT+08:00 Rowland Penny via samba > <samba at lists.samba.org>: > > On Mon, 23 Jul 2018 16:46:50 +0800 > > d tbsky <tbskyd at gmail.com> wrote: > > > >> 2018-07-23 16:04 GMT+08:00 Rowland Penny via samba > >> <samba at lists.samba.org>: >

FYI, asterisk DOES now support g723, but you have to pay for it: http://store.yahoo.com/asteriskpbx/asteriskg729.html -----Original Message----- From: Dan Fernandez <danfernandez00@hotmail.com> Date: Mon, 5 May 2003 17:33:05 -0300 To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] Has anyone gotten SIP_CODEC= to work? Basically, since I?d like to use g723 for sip

2018-07-19 23:59 GMT+08:00 Rowland Penny via samba <samba at lists.samba.org>: > > Please see inline comments. > > On Thu, 19 Jul 2018 23:44:48 +0800 > d tbsky <tbskyd at gmail.com> wrote: > >> thanks a lot for the quick help. I remember in old days it happened >> sometimes. but after upgrade rhel 7.5 (from samba 4.6.x to 4.7.1) and >> samba DC

Hi, I am using Aserisk 1.4.23.1 and trying to use SIP_CODEC to define the codec being used. I have exclusively Polycom phones for this test, and basically I want all communications to use g729 (preferred codec), except for pagine 20 phones (which busts my g729 license count). In that case I want to use gsm. I have therefore specified Set(SIP_CODEC=gsm) I my dialplan before the appropriate

Hi: i am surveying ip phones for our company. we will use them with asterisk. we have office in taiwan, hong kong,singapore and china. cisco and polycom are too expensive for us. we try several china brand ip phones. they are all cheap and some of them have good quality. but most of them won't offer future firmware support, which we think it's important for ip phones.

HI: i just trying memdisk that comes with syslinux 3.35. i try to load a dos image, which contains ghost verison 8.3 and ghost version 11. both version of ghost hangs when start-up. memdisk that comes with 3.40 pre is ok. and many earlier versions is ok too. i try some parameter like "safeint","raw". but none work. i use memdisk with pxelinux, below is part of my

Hi: I found I can setup password for uspmon. but upsc can connect to any upsd without authentication. although the ups data is not very confidential, but I would like not to expose it to anyone who can connect to server. is there any method to harden upsd? thanks for hint. Regards, tbskyd

hi: when testing nut in our environment, we found something that nut maybe tune for "stale/dead ups" situation. currently the "dead ups" are assume alive(eg: host shutdown unnecessary), unless it is in the "OB" state before going to stale. our environment (ServerA + ServerB forms a cluster): ServerA-> usb to UPSA -> two PS power by UPSA and UPSB

hi: I upgrade my system from rhel 7.3 to 7.4. so libvirt upgrade to 3.2. I found command "virsh define vm.xml" sometimes modify "vm.xml". I thought the command will read vm.xml, not write to it. is this kind of behavior by design? for example vm.xml with the line <cpu mode='custom' match='exact'> will be replaced with <cpu

hi: my company has two dns servers, but samba4 internal dns forward can only forward to 1 server. to workarround it i run dnsmasq as dns cache at 127.0.0.1 and let samba4 dns forward to 127.0.0.1. my smb.conf looks like: dns forwarder = 127.0.0.1 interfaces = 10.1.1.1 bind interfaces only = Yes with the setting samba won't bind to 127.0.0.1, so dnsmasq can use 127.0.0.1 to do the work.

On 03.10.19 15:08, Administrator TOOTAI wrote: > Before calling the gatreway add > > same = n,set(SIP_CODEC=alaw) > > [...] > Hey there, that doesn't work as it seems to be implemented for chan_sip only; I'm using chan_pjsip; sorry if I didn't explain myself properly. Anyway, in my case that would not really be an acceptable solution anyway, because I need the

On Mon, 23 Jul 2018 16:46:50 +0800 d tbsky <tbskyd at gmail.com> wrote: > 2018-07-23 16:04 GMT+08:00 Rowland Penny via samba > <samba at lists.samba.org>: > >> >>> idmap config SAMDOM:range = 1000-999999 > >> idmap config SAMDOM:unix_primary_group = yes > > > > That isn't a bug, it is a feature ;-) > > Before 4.6.0

hi: my testing server has two power supply and attach to two ups. one of the ups is connect to the server with usb. my upsmon.conf like below: # for two ups MONITOR ftups at localhost 1 monmaster nutmaster master MONITOR ftups at 10.1.1.2 1 monslave nutslave slave MINSUPPLIES 1 # for early shutdown NOTIFYFLAG ONBATT EXEC+WALL+SYSLOG NOTIFYFLAG ONLINE EXEC+WALL+SYSLOG NOTIFYCMD

Hello, I have a couple of 7960 and a quad T1 card on my asterisk box. I want to let the phones to use g729 when they "talk" to each other, but to use g711 when I'm going to route the call out of my network using the T1 card. Everything works just fine between the phones, but in order to be able to make calls through T1 I have to disallow the g729. For this purpose I have the

2018-06-26 2:10 GMT+08:00 H. Peter Anvin via Syslinux <syslinux at zytor.com>: > On 06/18/18 13:06, R S via Syslinux wrote: >> The narod.ru images are super outdated (FreeDOS kernel 2028) unfortunately. >> >> If you are interested I could provide a 5MB FDD image template based on >> FreeDOS 2041 kernel (the latest available at that time in 2014) where you >>

2015-11-16 17:08 GMT+08:00 Andrew Bartlett <abartlet at samba.org>: > On Sun, 2015-11-15 at 23:49 +0800, d tbsky wrote: > > hi: > > my company has two dns servers, but samba4 internal dns forward > > can only > > forward to 1 server. > > to workarround it i run dnsmasq as dns cache at 127.0.0.1 and let > > samba4 > > dns forward to 127.0.0.1.