similar to: Need help for issue with /etc/ppp/ip-down in Centos 6.4 64 bits

I'm trying to set up a Linux-based dialin server on our company network. I'd like to have PPP authenticate using winbindd, if possible. I feel like I've almost gotten it to work, but I can't quite get there. Files: /etc/pam.d/ppp: #%PAM-1.0 auth required pam_nologin.so auth sufficient /lib/security/pam_winbind.so account required

I am trying to set up a secure PPP tunnel between an OpenSSH client and server, and am having problems establishing the tunnel. ----------------------------------------------------------------------------- Server information: Stock Redhat 6.1 machine running a 2.2.12 kernel OpenSSH version 2.2.0p1 (downloaded as Redhat RPMs, revision 2) OpenSSL version 0.9.5a (downloaded as Redhat RPMs, revision

Alex, thanks for your soon answer, but in case I want to configure PPP on this server, what files do I have to configure? Can I login in this server using SSHD over a PPP conection? Regards; Israel > Just terminal access -> I want to login in my linux server connecting > through the modem connected in /dev/ttyS0 Not sure if this is complete. Install mgetty if not already present on

We have a system running fedora 8 using pptpd from the poptop yum repository. See http://www.poptop.org/ pptpd/pppd use the winbind plugin from the ppp package to authenticate to Active Directory. This works just fine. Then I found the same setup would not work on a fedora 9 setup. In order to exclude any possible configuration errors I built a virtual machine and simulated an upgrade. This

hi! I'm trying to get zapras working in GSM csd network. Whenever a dialup call is initiated from the mobile to the * gateway the following appears in the log and zapras terminates. Phone gives the error dialup not answered. ==> /var/log/messages <== pppd[2310]: Plugin zaptel.so loaded. pppd[2310]: Zaptel Plugin Initialized pppd[2310]: Using zaptel device 'stdin' pppd[2310]:

I try to setup a PPTP VPN server on Centos 7 and from client a router Vodafone Station (Firmware 5.4.8.1.316.1.21) On c7 I have install this: [root at s-virt tmp]# rpm -q pptpd ppppptpd-1.4.0-2.el7.x86_64ppp-2.4.5- 33.el7.x86_64 and setup all file and firewall like howto say.This now is my config: /etc/pptpd.conf:option /etc/ppp/options.pptpd/etc/pptpd.conf:logwtmp/etc/pptpd.conf:localip

In case this matters... RH AS 3 / samba 3.0.0-14-3E Just switched dial in from Windows RAS server to Linux PPP server. I can't seem to figure out a way to allow Windows users to log in with Domain name i.e. /etc/ppp/pap.secrets client server password ip address DOMAIN\user * my_pass 111.222.333.444 "DOMAIN\user" * my_pass 111.222.333.444

Hi, I''m in a process of setting up a firewall system, which is going to be also an ipsec/l2tp and pptp vpn server for some mobile clients. The problem is, that the system has two ISPs a cable one (no problems here) and a DSL provider. Because of the DSL provider the system is going to have one pppN interface for DSL (net zone) and many pppX interfaces for l2tp/pptp (loc zone)

On 11/05/2015 12:14 PM, Reindl Harald wrote: > > > Am 05.11.2015 um 18:08 schrieb Steve Ankeny: >> 'network-manager' is not installed but 'resolvconf' is -- >> >> adam at eagle:~$ cat /etc/resolv.conf >> # Dynamic resolv.conf(5) file for glibc resolver(3) generated by >> resolvconf(8) >> # DO NOT EDIT THIS FILE BY HAND -- YOUR

Hello all! Sirrix AG, Saarbr?cken (manufacturer of the Sirrix.PCI4S0 4-port ISDN card for Asterisk) has released the new Asterisk dialplan command PPPD (app_pppd). It allows to connect a Linux PPP daemon to an arbitrary digital (ISDN) Asterisk channel to provide RAS dialin and dialout. The PPPD command has successfully been tested with Sirrix.PCI4S0 cards and a standard ISDN4Linux ipppd "on

I previously posted about this problem and received suggestions involving turning off echo cancellation. As far as I can tell, echo cancellation is already disabled on this channel, so I'm back. What I've got is a small home setup with a single four-port Digium card: Module 0: Installed -- AUTO FXS/DPO Module 1: Installed -- AUTO FXS/DPO Module 2: Installed -- AUTO FXS/DPO Module 3:

At the moment I've no host with which to test ppp/lp things on. If you (or anyone) could provide complete regexes, (each beginning with ^ and ending with $) I will patch the rules accordingly. If not, sending the full log lines is a good start. Thanks! -- [ Todd J. Troxell ,''`. Student, Debian GNU/Linux Developer, SysAdmin, Geek :

Hi, I installed CentOS 3.3 and kept the machine up2date. I installed poptop and the newest ppp-cvs version ( ppp-2.4.3-0.cvs_20040527.6) We are running a ssh + ppp tunnel for our internet tunnel/tunnel to our NOC. After the upgrade we see these error messages while starting the tunnel: Jan 24 15:00:40 natgw modprobe: modprobe: Can't locate module ppp-compress-26 Jan 24 15:00:40 natgw

Hi, I have a few remote user who use a PPTP based VPN. The server is running PoPToP (http://www.poptop.org/), and a pppd patched to support MPPE/MPPC for (some) added security. Currently, users authentication information is stored in plaintext in /etc/ppp/chap-secrets. I'd like to be able to put users into LDAP, and have ppp authenticate either directly against LDAP, or against Samba (with an

Hello all, I am working on a VPN solution using FC3-2.6.12-1.1381 - openswan 2.4.4-1 - l2tpd 0.69-13 - pppd 2.4.3-5 - samba 3.0.10-1. When attempting a connection from an XP-SP2 box pppd dies without authenticating the user (see below). I have run ntlm_auth from the command line with success. What tools can I use to identify the failure? Is there an obvious error in the ppp options file?

Hi all I'm not sure whether to go to the ppp lists for this, or the samba lists. I thought I'd try here first. I have a linux firewall using winbind to authenticate users coming in with PPTP. It all seemed to work OK at first. After a while I noticed that authentication was denied to users who had previously (as in less than a day) authenticated successfully. After a day or so of

I'm trying to use ZapRAS to enable ppp connection through my E1. After the ZapRAS command is executed, all sound is crappy on all lines! The only solution is to reboot the machine (or halt it, and then power it on since Digium's hardware doesn't like reboots). Anyone know how this can happen?! I'm using * 1.0.6 on Dell PowerEdge 1850 which are told (too late though) not to work

My goal is to make VPN access to our Samba PDC (FreeBSD 7.0) so that users can access there home shares from Windows clients. I have read the instructions at http://samba.org/ftp/unpacked/lorikeet/pppd/final-report.pdf, but I can't make it work. Don't know if is due to my lack of skills or has something to do with the Popop functionality in FreeBSD. Following the instructions, i made a

I'm wondering if I'm seeing a regression of 5616 with 3.4.8. I'm trying to set-up pptpd with winbind, which I'm doing on two machines on Debian lenny, and I'm trying on Debian Squeeze now. The Windows client is saying "Error 778: It was not possible to verify the identity of the server." The logs say that everything is ok, and that the client is hanging up the

Dear Sir, I was trying to install bridge as we are installing scps gateway in our testbed.This requires us to install the bridge. Our Linux version is 2.4.18 ~3 and we are using redhat 7.2 Please let me know which is the bridge I should install and how to configure it. Before configuring the bridge what I should check in my configuration. Thanks for your time, Sincerely Rama ===== I hear