similar to: /etc/sysconfig/kernel: line 7: alias: aacraid: not found

Hello, I've changed the web hoster recently and also upgraded from CentOS 5 to6. Now I get this warning: # service iptables restart iptables: Flushing firewall rules: [ OK ] iptables: Setting chains to policy ACCEPT: filter [ OK ] iptables: Unloading modules: [ OK ] iptables: Applying firewall rules: WARNING: Deprecated

Hi all, I've setup a ethernet bond on my centos 5.6 server , when i do a reboot the bond does come up but cleared all the slaves and i've to manually re-add them with ifenslave. does anyone know a solution to this? am i missing something? offcourse i can add it to my rc.local but there must be a more elegant way. please see my configs below Thanks, Wessel ifcfg-bond0: DEVICE=bond0

Can I use puppet to ensure that a file includes certain text but not be required to maintain the entire file? For example, I would like /etc/modprobe.conf to contain the following lines but the file will also contain lines that are system dependent. --------------------------------------------------------------------------------------- # Disable IPV6 alias net-pf-10 off alias ipv6 off

Hello, I''m using Xen 4.0.0 compiled from source with the 2.6.31.13 kernel that it pulls down on its own. I added support for the aacraid driver to the kernel using ''make menuconfig'' from the build-linux-2.6-pvops_x86_64 subdirectory, and then built and installed the whole thing using ''make install'' from the xen-4.0.0 directory. I compiled this

I've got myself an Adaptec 2200 HW RAID card to play for couple of days. Tha card uses aacraid device driver. Seems to work nicely, however just wandering if there's a tool (prefferably CLI) for CentOS that can read out RAID configuration data, status of individual drives, maybe even manage (create/delete) RAID devices? Thanks for any and all pointers.

Does Centos include any runtime monitor/control software for raid arrays on AACRAID devices as on IBM 3650's? -- Les Mikesell lesmikesell at gmail.com

This isn't exactly a Centos question but maybe someone here can help: Does the AACRAID controller (as in an IBM 3550) store its config info on the drives or internally? I only have one of the boxes and want to load Centos 3.x on several drives which can be swapped into servers at another location. With SCSI, all that took was a full disk dd copy and a little fiddling with the HWADDR for the

Hi there, I'm currently trying to install a server with Centos 4.3 x86_64. I have issues installing drivers from a Driver disk, I got a driver(2810SA) from the Adaptec site, I started it up with "linux dd" It reads the disk fine .... I can see the aacraid module in the list but as soon as I choose it. Then I get a screen saying "Do you wish to load more Driver Disks?" I

Hi there, After updating a server from CentOS 5.3 to 5.4 my Xen pci-passthru setup has some troubles. The server has two NICs, one used by dom0 and the other assigned to a domU and one SCSI controler assigned to another domU. It has been working fine since CentOS 5.1, when I did the initial setup. After upgrading to 5.4, I get this error when starting the domU with one of the NICs assigned:

Hi In our office environment few servers mostly database servers and yesterday it happened for one application server(first time) the partion is getting "read only". I was checking the archives, found may be similar kind of issues in the 2007-July archives. But how it has been solved if someone describes me that will be really helpful. In our case, just at the problem started found

Hi, I have a dell poweredge 850 with centos 4, freshly installed. I'm now trying to add in a fibre -> sata raid enclosure with LSI HBA's in the 850. My problem is the enclosure gets detected first, hijacking sda and sdb from the internal SATA drive and causing kernel panic at boot time. I've tried changing the order in modprobe to the following: alias eth0 tg3 alias eth1

Hi all, I just noticed that my two nics that are bonded via mode 0 are showing the same mac addy in ifconfig. Is this normal? In syslog I keep getting; kernel: pbond0: received packet with own address as source address Some guidance is appreciated before I dive in and troubleshoot. If I don't list the mac addy in my ifcfg-th# files, only one of the 2 nic comes up during boot.

I have a machine I just deployed w/ tg3 interfaces, I have setup bonding on this same line of server (HP DL380 G4) a million times. I saw there were changes recently to how you configure a bond and have my setup configured according to: http://kbase.redhat.com/faq/docs/DOC-7431 The HP switch has a LACP trunk defined on the two ports. Problem is, when rebooting, I need to issue a `service network

.. in that expected way where newly installed kernel is set to boot as default. would you suggest where to look, what to check? many thanks.

This isn't really a Centos question but it affects the systems so I'll ask here anyway. I've noticed when swapping disks around on IBM 3550 boxes that some of them see one more cylinder on drives than others but I can't find any settings or differences that might control this. It's an obvious problem when you fdisk/format on the one that sees the additional cylinder,

I've just had an strange thing with Adapted 2200 RAID controller (with optional battery module installed). Basically, new card, worked perfectly for weeks, several reboots and stuff. Then all the sudden, when I rebooted machine this today, system would simply freeze during boot. BIOS showed the card initialized properly, kernel module was loaded (from initrd) and it found all of the arrays,

Le 26/01/2016 12:53, lejeczek a ?crit : > .. in that expected way where newly installed kernel is set to boot as > default. > > would you suggest where to look, what to check? In /etc/sysconfig/kernel : # UPDATEDEFAULT specifies if new-kernel-pkg should make # new kernels the default UPDATEDEFAULT=yes -- Philippe BOURDEU d'AGUERRE AIME - Campus de l'INSA

On 09/25/2020 05:42 PM, Akemi Yagi wrote: > On Fri, Sep 25, 2020 at 11:51 AM H <agents at meddatainc.com> wrote: >> On 09/15/2020 08:07 PM, Akemi Yagi wrote: >>> On Tue, Sep 15, 2020 at 3:54 PM H <agents at meddatainc.com> wrote: >>>> I had installed kmod-jfs in an earlier version of CentOS 7, 7.4 if I remember correctly. I now have a machine running the

It appears that if I do anything to grub.conf, say, take out the rhgb quiet, after every succeding kernel update, I have to manually edit grub.conf, because the kernel update - maybe the post install script? - will set the default to be the previous kernel. Has anyone got a solution to this, so that a kernel update will give the new kernel as the default? mark

On Fri, Sep 25, 2020 at 11:51 AM H <agents at meddatainc.com> wrote: > > On 09/15/2020 08:07 PM, Akemi Yagi wrote: > > On Tue, Sep 15, 2020 at 3:54 PM H <agents at meddatainc.com> wrote: > >> I had installed kmod-jfs in an earlier version of CentOS 7, 7.4 if I remember correctly. I now have a machine running the latest version of jfs module but kmod-jfs does not