similar to: Fwd: Identifying the multiple cards Digium TE820

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

I just installed a TE820 octal span T1 card, and it's not showing up in dahdi_hardware output. This was installed into a test machine that already has a TDM800P card in it, and that one is showing up and working fine. Is there some kernel module that I'm missing? Lspci: 05:04.0 Ethernet controller: Digium, Inc. Wildcard TDM800P 8-port analog card (rev 11) 21:08.0 Communication

Hello, I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to providers Cisco 2800 with VWIC-1MFT-E1 card. the same card runs fine with another E1 provider. TE420 led's lite green. Message type: RELEASE COMPLETE (90) < [08 02 80 ac] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause:

Hi, I'm having some questions related to echo cancellation configuration on a Digium board enabled systems (B410P, TE420, TE420B, ....) for cases when a hardware ech canceller is present or not. I read in TEXXX manual that when setting echocancel=yes in chan_dahdi.conf on a VPMOCT64-equiped system, 128ms hardware echo cancellation was enabled. 1. I'm correct thinking that it is then

I have some more investigation to do on this, but I wanted to see if anyone here had any insight into the issue I've run into. The hardware is a HP DL360 G6 with a TE420 gen 5 4-port T1 PRI card. It is one of several systems that have been running without issue since 2010/2011. They have all been running CentOS 4 32-bit with Zaptel 1.4.12.1 (with patch for gen 5 card), libpri 1.2.8 and

Hello Team I have installed the new DL580 and used the new TE420B to add capacity on our ivr. Before I put new E1?s I decided to first move the old e1 from the old system to this new one but it has errors which not only affect the audio quality, but also cause the asterisk to refuse any call after sometime even though the channels seems up and active {seems d-channel fails}.. When processing

In article <CAHZ_z=w5DMg93gShtC93kuC+fnmraPgV46BS956U5BQXVgyhxg at mail.gmail.com>, Matt Fredrickson <creslin at digium.com> wrote: > On Tue, Apr 3, 2018 at 5:44 AM, Tony Mountifield <tony at softins.co.uk> wrote: > > I have some more investigation to do on this, but I wanted to see if anyone > > here had any insight into the issue I've run into. > > >

Hi list! We currently have a PRI gateway composed by a box with two Digium quad-span PRI cards (a TE420 and a ). One of the cards is filled with TELCO1, while the other has first two slots filled with TELCO2, and 3rd slot with TELCO3. I am currently having (timer ?) issues on TELCO3 (span 7) D-Chan (202 as determined by dahdi_genconf ) is constantly failing causing on-going calls to terminate.

Asterisk 1.4.32 dahdi-2.3.0.1 Centos 5.5 Digium TE420 CAC channel bank (2) Cisco RVS4000 router Cox 50 Mbps/ 5 Mbps cable modem Flowroute provider codac G-711 90 % CPU idle callwaiting=no When there are 10-15 or more calls up the farend hears a callwaiting like beep every 3 to 6 sec. the duration of this "beep" is very short and would be no problem if it didn?t happen every few

On Tue, Apr 3, 2018 at 4:57 PM, Matt Fredrickson <creslin at digium.com> wrote: > On Tue, Apr 3, 2018 at 4:38 PM, Tony Mountifield <tony at softins.co.uk> > wrote: > > In article <CAHZ_z=w5DMg93gShtC93kuC+fnmraPgV46BS956U5BQXVgyhxg@ > mail.gmail.com>, > > Matt Fredrickson <creslin at digium.com> wrote: > >> On Tue, Apr 3, 2018 at 5:44 AM, Tony

I have just built a new system using an HP DL360G7 with a TE420 T1 card, and this is the first system using a generation 7 server. I'm not sure whether that is an issue or not. I am using Asterisk 1.2, and Zaptel 1.4.12.1 with patches for GEN5 of the TE420 card. I have successfully used this combination on several systems based on the DL360G6 and TE420(gen5), which have been in production for

Hello! I use asterisk with TE420 as PRI switch for two channels : ;panasonic uplink group=3 context=panasuplink ; relaxdtmf=yes ; immediate=yes rxgain=0.0 txgain=0.0 mohsuggest=default jbenable = no ; jbenable = yes ; jbmaxsize = 200 ; display_send=name_initial display_send=name

Hello! Just got new server with TE420. Not all four spans will be used immediately, but spans not configured or not connected blink red light. Is it possible to turn span off, so my colleagues will not eventally tell me that something is wrong with asterisk? :-) Thank you!

I have the following software installed in a Centos Box with a TE420 (5th Gen) card. . Centos 6.5 64-bit . Asterisk 1.4.22 . dahdi-linux-complete-2.9.1.1+2.9.1 . libpri-1.4.14. Even without plugging in the ISDN into span 1, all 4 spans are flashing red. Plugging an E1 into span 1 makes no difference. My system.conf is just simply: loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15

Hi, Continuing with the saga of Digium vs MTNL Mumbai, looking for suggestions on handling incoming Caller-ID issues. The card manages to grab a couple of (random) digits of the incoming CID, but they're more or less useless. Is there any way to fix this? Asterisk 1.8.13, Dahdi 2.5.0.1 on Debian Testing (Wheezy), MTNL Mumbai. Digium, Inc. Wildcard AEX410 4-port analog card (PCI-Express)

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

Hi, I'm experiencing some strange problems with out Digium card. First the details abount hardware and software: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) Asterisk 1.6.0.20 dahdi-linux-complete-2.2.1-rc2+2.2.1-rc2 libpri-1.4.10.2.tar.gz The problem now is that there are a number of clients that I call and suddenly the connection drops. Just a few seconds later the clients calls

Hi, I carefully followed instructions in README file lasting with : /root/register ... blabla asterisk -r CLI> restart now Then asterisk -r fails with : # asterisk -r Asterisk 1.6.1-beta4, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <markster at digium.com> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is

I have a pretty large setup on one of my customers. Digium TE420B (with echo cancelling module), 3 Xorcom Astribanks with 32 FXS each and 1 Xorcom Astribank with 16 FXO. These FXO ports are NOT used for fax/data transmission, as they are connected to cell phones. Not really related to the issue, but there are also 250 SIP phones. The problem is that fax and dial-up connections are really

2009/1/27 Olivier <oza-4h07 at myamail.com> > > 2009/1/27 Olivier <oza-4h07 at myamail.com> > > Hi, >> >> I carefully followed instructions in README file lasting with : >> /root/register >> ... blabla >> asterisk -r >> CLI> restart now >> >> Then asterisk -r fails with : >> # asterisk -r >> Asterisk