similar to: [DAHDI] qozap instead of wcb4xxp

Have a new TE133 in a dell R320. dahdi_cfg -vvv shows: DAHDI Tools Version - 2.9.1 DAHDI Version: 2.9.1 Echo Canceller(s): Configuration ====================== SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1) Channel map: Channel 01: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 01) Channel 02: Clear channel (Default) (Echo Canceler: mg2) (Slaves: 02) Channel 03: Clear

Hello. We have a number of Xen 3.4.2. boxes which have constant iowaits at around 10% with spikes up to 100% when accessing data over NFS. We have been unable to nail down the issue. Any advice? System info: release : 2.6.18-194.3.1.el5xen version : #1 SMP Thu May 13 13:49:53 EDT 2010 machine : x86_64 nr_cpus : 16 nr_nodes

Dear all, I know this is more a Digium hardware than an Asterisk issue. Already posted a question at Digium, however also like to see whether anyone in the Asterisk community has encountered the following situation: I installed a Digium B410P BRI PCI card on my new asterisk server, following the steps specified in the manual. I can see the PCI card is available using the lspci command: ...

Hello, I just bought a TE121 T1/E1 card, and now trying to install it on a 1.4.23.1 asterisk with dahdi 2.1.0.4 Actually first everything went on well and i managed to see my card on dahdi. Here's the output: #asterisk# dahdi_hardware pci:0000:04:08.0 wcte12xp+ d161:8000 Wildcard TE121 and this is the scan: -------------------------- asterisk# dahdi_scan [1] active=yes alarms=RED

Hello there I have been trying to install HP Storageworks DAT72 on CentOS 5 in vain. On system reboot, neither /dev/st not /dev/sg is available. May you please lead me through as this is my first time trying to do it lsmod Module Size Used by ipv6 267617 40 xfrm_nalgo 13381 1 ipv6 crypto_api 12609 1 xfrm_nalgo autofs4

Hi, a few month ago, I tried to install zaptel for my Beronet BN8S0 pci card... I gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to support the card and I'm very interested to get it to work. But how to get rid of these annoying qozap driver? bishop dahdi # lspci -v -nn -s 01:00.0 01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S]

Dear Supports, I was attempting to install BRI Card(OpenVox B800P) with wcb4xxp in NT mode .But I can not make it worked! Could you please give me some hints? Thanks in advance! Here are my environments: ------------------------------ CentOS-5.3 Kernel-2.6.18-164.el5 asterisk-1.6.1.6 dahdi-linux-complete-2.3.0+2.3.0 libpri-1.4.10.2 OpenVox-B800P(the first port is spliting into

Hello all: I was getting a reproducible crash during an update of a xen system. The problem went away after I set SELinux to permissive, but the fact that it crashed was alarming (first one on a non-dev system that I've had in over a year). I attempted the update earlier but it crashed at the same point after attempting to update selinux. After verifying hardware (all clean) I ran it again

Hi, I have one KVM instance (centos 5) that keeps crashing and i see the message log with the following: Oct 14 16:24:48 localhost kernel: psmouse.c: Explorer Mouse at isa0060/serio1/input0 lost synchronization, throwing 1 bytes away. Oct 14 16:24:49 localhost kernel: BUG: soft lockup - CPU#0 stuck for 12s! [ntpd:2363] Oct 14 16:24:49 localhost kernel: CPU 0: Oct 14 16:24:49 localhost kernel:

This error is not 100% reproducible. However, kernel panic has been occurred many times for last two months. It usually happens when multi VMs (in our case, 14 VMs) are booting together. After we made three big changes to gain more availibility, it began to happen. Changes are : 1. Use *NAS* as vm storage for migration from local disk 2. Use *two bondings* for switch HA (with 4 nics) from

Dear, everyone We have stuck with the problem that the OSS connect one dead client or one with changed IP address all the time until we reboot the dead client. From the OSS log message, we can get the information as follows: Jul 7 14:45:07 com01 kernel: Lustre: 12180:0:(socklnd_cb.cLustre: 12180:0:(socklnd_cb.c:915:ksocknal_launch_packet()) No usable routes to 12345-202.Lustre:

Hello, After installing on Ubuntu 10.04 using the tutorial on http://hmontoliu.blogspot.com/2010/03/installing-asterisk-and-freepbx-on.html I have a running instance of Asterisk. PROBLEM: result of dahdi_cfg: DAHDI Tools Version - 2.2.1 DAHDI Version: 2.2.1 Echo Canceller(s): MG2 Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Echo Canceler: mg2)

I'm migrating my son's Dell laptop from Vista to CentOS 5.3. He came back from each of his first two years of college loaded with virii and trojans. This year he said "Dad, can you give me Linux?" 5.3 went onto the laptop easily and after doing some research, I applied the guidance for getting multimedia working and got the nvidia driver loaded. That works great. Last

I am getting zero interrupts for a new Digium TE134 Card on a new brand new Dell T40 server with the latest BIOS. Is there something that I am missing or is the card not compatible with Dell servers? (cat /proc/interrupts ; sleep 1 ; cat /proc/interrupts) | grep -i wcte13xp0 16: 0 0 0 0 IR-IO-APIC 16-fasteoi i801_smbus, wcte13xp0 16: 0

lsmod shows dm_raid45 66509 0 dm_message 6977 1 dm_raid45 dm_region_hash 15681 1 dm_raid45 dm_log 14529 3 dm_mirror,dm_raid45,dm_region_hash dm_mod 62201 4 dm_mirror,dm_multipath,dm_raid45,dm_log dm_mem_cache 9537 1 dm_raid45 I am wondering why these raid modules are loaded as I am not running raid on this

Hi, I had problems described in another thread so went from a start, but now have problems when loading qozap module. I get : # insmod qozap.ko ports=9 insmod: error inserting 'qozap.ko': -1 Unknown symbol in module and in /var/log/messages: module qozap unsupported by SUSE/Novell, tainting kernel. qozap: disagrees about version of symbol zt_receive qozap: Unknown symbol zt_receive

Hi, (cc. asterisk-users, hope that is not a big Faux Pas) I've had trouble with the qozap driver for a LONG time now, where it will not recognise and ignore a missing ISDN2 line on a quad card if one of the 4 ports is unplugged or somehow faulty. The symptom is that is correctly recognises the fault, but then clears the RED ALARM almost immediately, leaving Asterisk thinking that it can call

Good day all Is there a fix for these errors yet for the junghanns cards Jul 26 17:15:05 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 1 z2 107 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 Jul 26 17:15:18 pbx1 kernel: qozap: dropped audio card 1 cardid 0 bytes 5 z1 118 z2 97 Jul 26 17:16:33 pbx1 kernel: qozap: dropped audio card 1 cardid

Hi, In my 1.6.1.18 with dahdi 2.2.1.1, I've got : # dahdi_hardware pci:0000:01:0a.0 qozap- 1397:16b8 Junghanns OctoBRI ISDN card Does it mean I should download and use qozap or is it a bug in Dahdi ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100412/de87e46e/attachment.htm

Hi all, Using Asterisk 1.0.10-BRIstuffed-0.2.0-RC8q with a Junghanns quadBRI (2 spans connected) and a Digium TDM400 for extensions Shouuld I be worried about these lines that keep showing up in my /var/log/messages? qozap: dropped audio card 1 cardid 0 bytes 6 z1 10 z2 116 qozap: dropped audio card 1 cardid 0 bytes 6 z1 50 z2 28 qozap: dropped audio card 1 cardid 0 bytes 6 z1 59 z2 37 .. ....