similar to: Better info on call failure

Hello Everyone. In my outbound contexts, I'm using "${DIALSTATUS}" to fail over to other routes if the chosen route rejects the call. Now, My current scenario is if I get "BUSY" back from the first provider, I send a busy back to my customer. If I get something like CHANUNAVAIL (Like a SIP 503) I advance to the next carrier and attempt the call. This works

Hello All, Looking for a little guidance on Real Time Pattern Matching. We are attempting to block outbound 411 via when someone dials NXX-555-XXXX, The must common being NXX-555-1212. However, We have some outbound providers that consider any call to NXX-555-XXXX a directory assistance call. So simply making my pattern _NXX5551212 doesn't work. So as you can see from the lines

So I've got a bit of a head scratcher. Wanted to get some insight. I've got a PBX running 12.3.0 We're a ULAW shop from end to end. But I've been playing with G722 just for fun. I've got a Yealink T46G on my desk, And my colleague, A Polycom IP650 (Same office). Basically, Whenever I make an outbound call to a destination to something not G722 ready, I get no

Greetings All, Regarding this archived post. http://lists.digium.com/pipermail/asterisk-users/2014-November/285169.html Did anyone ever find an solution to this? I've got a new box running 13.3.0 with the exact same issue. For those that don't read the link. I've got SIP Peers in realtime. All with a mailbox set. 98% of the time, These are loaded into asterisk without

Greetings all, First time poster, Sorry if this has been answered here before. We recently replaced a failed 1.4x asterisk PBX at a customer location. Voicemail access was setup when the customer dialed *8, This worked in 1.4. Now, Running 1.6 (I know it's old I had to load it quickly, And that's what I got working first. It'll get upgraded to 1.8 soon). The strange part is *8 no

When I have HylaFAX answer a call redirected to the fax extension in Asterisk when it detects CNG, Asterisk hangs up: Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 is ringing Jan 30 14:32:59 VERBOSE[1098]: -- IAX2/ttyIAX0552/12 answered Zap/23-1 Jan 30 14:32:59 DEBUG[1098]: Ooh, voice format changed to 8 Jan 30 14:33:01 VERBOSE[1098]: -- Channel 0/23, span 1 got hangup Jan 30

Hi. I'm dialling two numbers - one that's unobtainable, one that's busy. ${DIALSTATUS} is coming back ANSWER each time right before the channels hang up. Am using the following dialplan macro to dial out. [macro-advdial] exten => s,1,Dial(${ARG1},20,g) ; Ring the interface, 20 seconds maximum exten => s,2,Goto(s-${DIALSTATUS},1) ; Jump based on status

Just throwing this out here, hopefully someone can tell me why. *CLI> show version Asterisk CVS-HEAD-11/17/04-10:16:38 built by root@wanderer on a i686 running Linux Zap/g1 is pri_cpe to Bell Canada 5551234 is a normal POTS line I have busied out (handset offhook) exten => 1234,1,Dial(Zap/g1/5551234,,g) exten => 1234,n,NoOp(HANGUPCAUSE is ${HANGUPCAUSE} and DIALSTATUS is

Hello list. We just upgraded to 1.6.1.11. We are using real time information stored on mysql databases. That is all running fine. Now, since we upgraded, some member don't get calls from queues. In CLI: "queue show" shows something like: 611 (Local/611 at agents) with penalty 20 (realtime) (*In use*) has taken no calls yet We use the extension 611 in different computers, in the

Hi I am in the process of move a company from pstn to an asterisk setup. They had 2 pstn lines - only really needed a max of 2 previously. Now I have installed a tdm410 to handle the cross over from pabx to voip handset. this has been done, the tdm is now just used to provide a backup pstn line - only used as a last resort for outgoing calls - as its shared with a fax line. I use 2 voip

Hi All, I'd just like to verify what the correct operation of the timeout parameter is for the dial application. I'm not sure if I've encountered a bug or a configuration issue. When a sip phone is not responding to invites on an outbound call, the dial application still waits the duration of timeout before continuing with dialplan execution. I was under the impression that app_dial

Hi, As of v 1.6.1.1, can anyone tell me what the current possible values for DIALSTATUS could be? I found http://www.voip-info.org/wiki/view/Asterisk+variable+DIALSTATUS but believe it is outdated since there is no FAIL or FAILED in this list. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi All, i want to configure voice mail on Asterisk 1.4 for multiple users. let me explain you the scenario. i have 10 users with the name of 1000,2000,3000,4000,5000,6000,.......and these user can call to each other. Now i want to configure separate voice mail box for separate user. my extensions.conf ..... settings below.. [voicemail] exten => _X.,1,Dial(SIP/${EXTEN}) exten =>

Hello All, I am having an odd problem with Armin's chan-capi_cm on builds higher than 7955. It would seem that this happens on anything higher than 7955. What is happening is the isdn is ringing, then asterisk does a goto-if and just hangs. Asterisk itself is ok, but the isdn then rings out or busys out on the other side. Outgoing works fine, this only seems to effect incoming. I

I need help translating extensions.conf to AEL: [default] exten => _X.,1,Set(DID=${EXTEN:6}) exten => _X.,n,Goto(continue,1) exten => _1X.,1,Set(DID=${EXTEN:7}) exten => _1X.,n,Goto(continue,1) exten => continue,1,Noop(${DID}) exten => continue,n,Set(GROUP(IAX)=incoming) exten => continue,n,GotoIf($[${MATH(${GROUP_COUNT(incoming at IAX)}+${GROUP_COUNT(outgoing at

I'm still trying to learn some parts of Asterisk, so sorry in advance for the dumb question! How do I set up an extension to dial out to the PSTN through my ZAP interfaces? I want the ability to have a ring group that will ring all of the phones in an office and then ring cell phones if nobody answers. I'm sure this is simple to do but I'm at a loss. I have tried the following

Here's an interesting question: If I transfer a call from Asterisk system to another with IAX, is there any way I can get control back on the original system? Or.. do I lose control, and the dialplan has to continue on the new system? Scenario is we transfer calls to an Asterisk system that handles ACD queues. If the ACD queue times out, we want to send the caller to voicemail on another

i would like to carry some oversea pstn-destinations via sip to providers like stanaphone, however, in case of a network-failure or if the provider is not available, i want to fallback to the zap-channels so the call is carried out to the pstn directly. the usual approach would be to check the dialstatus(e.g.NOANSWER). however, asterisk tries >60seconds to reach that peer(even when the ip

In the following macro, a call is dialed and control branches according to DIALSTATUS, much like the default std-exten macro. What I'm trying to figure out is how to regain control when the call is answered. ; Standard extension logic [macro-stdexten] ; ${ARG1}=Extension ${ARG2}=Device(s) to ring exten => s,1,NoOp(stdexten ${EXTEN}) exten =>

Hi, I'm sure this topic has been discussed before but i'm having trouble finding a simple answer. Whats the easiest way of sending an email from Asterisk? I want to set up a warning so that after a Dial cmd, if the DIALSTATUS is CHANUNAVAIL, Asterisk sends an email to the admin to check the voip phone is connected properly. I've got the dial plan set up, I just dont know what