similar to: PJSIP outbound register and inbound calls

I have a working Asterisk 13.1.0 running, and I am trying to configure a SIP trunk for outbound and inbound calling, and a DID for the Asterisk server, which is used for incoming calls from PSTN. I configured my SIP.US trunks (showing one gateway, gw1, here for brevity, have two: gw1 & gw2, which are both configured on my end): [sonnyGW1] type=registration transport=transport-udp

Hello, I have an Asterisk 13.6.0 PBX using PJSIP connected to the Twilio gateway. I am able to make calls outbound through the gateway, but I am not able to make calls into the PBX from external PSTN. Specifically, an incoming call is _received_ by Asterisk, but it is not able to route the call internally owing to the following error: [Feb 18 21:08:47] NOTICE[4606]:

Thanks George, for your mighty quick response. I made the changes (re: server_uri_pattern etc.) and still, no luck--it fails for the same error. BTW, there is nothing for transport (but this is the same config from my SIP/UDP + Twilio days, which worked): *CLI> pjsip show transport twilio-siptrunk Unable to find object twilio-siptrunk. *CLI> pjsip show identifies No objects found. I did

I upgraded our Asterisk 13 LTS to Asterisk 16 Certified 16.8 yesterday and converted form SIP to PJSIP using the python script as a start and then mofiying from there.  I ran into an issue when testing that incoming calls from MagicJack would go silent after about 10 seconds.  This happened while in the automated attendant area.  This problem did not occur with Asterisk 13 LTS.  I reverted PJSIP

I have a trunk set up for the DID from my provider: [my_provider] type=registration outbound_auth=my_provider server_uri=sip:sip.example.com client_uri=sip:my_username at sip.example.com retry_interval=60 [my_provider] type=auth auth_type=userpass password=123456 username=my_username [my_provider] type=aor contact=sip:sip.example.com:5060 [my_provider] type=endpoint context=from-my_provider

hi, i want use asterisk+pjsip as voip client with multiple registrations (perf testing) i'm using this example configuration for one account [308] type=registration outbound_auth=308 server_uri=sip:308 at example.com:5060 client_uri=sip:308 at example.com:5060 [308](auth-userpass) username=308 password=pass [308](aor-single-reg) contact=sip:example.com:5060 [308](endpoint-basic)

Hello, We have a provider which is using Kamailio as front end. Our asterisk 13/chan_sip server has no problem to register and pass/receive calls form this provider. Now we want to move to asterisk 16/pjsip and face problem. Registration is OK but when we pass a call our INVITE never receive answer from the provider. We opened a ticket to their support but in the mean time we want to know

Hello. Asterisk 13.2. I transfer configs from chan_sip to res_pjsip. In chan_sip i have "match_auth_username=yes" and have nothing in pjsip. I have a lot of endpoints and registrations on same SIP server. And it's problem in pjsip now. Is not it? I requesting to add new value for endpoint option identify_by. The value 'uri'. Simple config (cutted): [siptrunk]

I have setup my Asterisk 13.1.0 server with PJSIP on AWS/EC2. My basic configuration works, and I am connected to a SIP trunk using SIP.US, and have set up my inbound calling which works correctly (when I call my PBX DID, the call does come into my PBX network). The issue is that I am not able to make outbound calls, because the call fails with the error:

Currently using PJSIP. First, they want me to get this working with the existing PJSIP configuration, but then setup a second box using chan_sip performing similar work. For PJSIP... I currently have an endpoint configured to a system using IP based authentication. It is configured with a match setting in the endpoint section. All channels coming from that IP address go to this endpoint. They

07.03.2015 0:24, Kevin Harwell ?????: > On Fri, Mar 6, 2015 at 2:06 PM, Dmitriy Serov <serov.d.p at gmail.com > <mailto:serov.d.p at gmail.com>> wrote: > > Hello. > > Asterisk 13.2. > I transfer configs from chan_sip to res_pjsip. > In chan_sip i have "match_auth_username=yes" and have nothing in > pjsip. > > I have a

That was the issue, thanks. I now am able to get the caller ringing on an outbound call, but an external phone number (E164) I am dialing does not ring. On Sun, Mar 15, 2015 at 12:19 PM, George Joseph <george.joseph at fairview5.com > wrote: > > > On Sun, Mar 15, 2015 at 8:32 AM, Sonny Rajagopalan < > sonny.rajagopalan at gmail.com> wrote: > >> I have setup my

I have servers setup in versions 11 and 13. Between two 11 servers, I had no issues sharing BLF, and assigning the hints on my Cisco 525G2 phones. I've upgraded to 13 on one of these servers, and now can't share BLF. I get something like... [2017-07-15 22:35:49] NOTICE[3483]: res_pjsip/pjsip_distributor.c:347 log_unidentified_request: Request from '"Travis Ryan" <sip:612

Hello everyone. I allow myself to submit a problem that I can not solve with my VOIP provider Orange in France [2023-06-08 13:19:03] ERROR[185091]: res_pjsip/pjsip_configuration.c:1044 from_user_handler: Error configuring endpoint 'Biv_Sortie' - 'from_user' field contains invalid character '@' [2023-06-08 13:19:03] ERROR[185091]: config_options.c:798 aco_process_var:

Hi all, we are trying to move our servers from chan_sip to chan_pjsip. At this time no problems with phones, they all register fine and can place calls. But for a trunk we face problem and can't place calls despite the fact that registration is OK. What we get is: [2018-04-16 16:08:33] WARNING[18665]: res_pjsip_outbound_authenticator_digest.c:178

Thanks George I originally didn?t have the 1002@ for the identify. Changed that when things were not working. I changed it back. Unfortunately, the system I am connecting with doesn?t seem to support the line support. Looking at the SIP packets, I see Asterisk send it. Unfortunately, they do not send the line information as part of the INVITE. I checked with some developers of that system

Yes, I think the dial does get executed (sonny calling outbound 202-555-1212): core set verbose 3 Console verbose was OFF and is now 3. -- Executing [912025551212 at from-internal:1] Log("PJSIP/sonny-00000031", "NOTICE, Dialing out from "" <sonny> to 12025551212 through fromgw") in new stack [Mar 15 19:27:06] NOTICE[16648][C-00000022]: Ext. 912025551212:1 @

Thank you George. I will pass along the rfc information to those responsible for the other switch. I missed the match_header addition to Asterisk. Unfortunately, the only header field that seems appropriate is the To header. On a separate box I am now trying to configure the endpoint recognition. Planning on multiple endpoints to the same switch, so I am trying to use the match_header field.

Hello, I'm trying to find more information about this Remote Attended Transfers, as is explained in https://wiki.asterisk.org/wiki/display/AST/res_pjsip+Remote+Attended+Transfers for Asterisk 12 using pjsip stack Was Remote Attended Transfer implemented in previous versions of Asterisk (versions without PJSIP, Asterisk 11 and previous)? Where can I find configuration examples to do it work

Hello, I have had numerous issues with PJSIP outbound calling in Asterisk 13.1.0 and SIP.US SIP trunk. My Asterisk server is on EC2 and I have opened up the appropriate ports. The SIP clients can be anywhere on the Internet, including behind NATs. I am able to get to my Asterisk server's internal extensions via the DID (and appropriate dialplans) but I am not able to make outbound calls to