similar to: Explicit Call Transfer(ECT)

The latest libpri is supposed to handle this properly, but doesn't seem to. Here's the debug info. CALLERID(name) is set to empty. < Protocol Discriminator: Q.931 (8) len=66 < TEI=0 Call Ref: len= 2 (reference 256/0x100) (Sent from originator) < Message Type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability:

Asterisk 1.8.4-rc2 (and 1.8.3) DAHDI Version: 2.4.1.2 libpri version: 1.4.12-beta3 We are having a problem with getting the nationalprefix option of chan_dahdi.conf to work. National calls do not have a "1" added to them when nationalprefix=1. The PRI debug shows the call coming in as a National Call, but the dialplan sees the call without a 1. chan_dahdi.conf: <snip>

Hello, I am trying to diagnose an intermittent error when a call comes in over our PRI lines. The problem appears random, however I have feeling it has something to do with the call volume, as the frequency increases with more calls on the system. I am not an expert when it comes to reading the PRI Span Debug statements but here is a call that had a problem and I bolded, italicized, and

Hi, Starting in Asterisk 1.8.0, Asterisk supports connected line updates. This is fantastic for SIP. How can I prevent them from being sent to a PRI channel? I'm having problems when a call is answered by an internal SIP extension, then transferred (blind or attended) to another internal SIP extension. One of my PRI providers can't handle the ROSE_ETSI_EctInform APDU and drops the

We fairly recently switched service providers for our 4 PRI circuits. Since that time, we started to notice some failed inbound calls. These calls terminate with an ISDN cause code 47 'resource unavailble'. Most of the time I see this error on the first or second channel on the second span in a trunk group (This is the providers trunk group for hunting, not an Asterisk trunk group). All

Hi All, I've a BT Versatility PBX that I want to connect to my asterisk 11.9.0 box via BRI port in NT mode but actually I wasn't able to get it working. I've another standalone PBX, it's a Panasonic model, which works fine connected to the same port. The BT connected to a UK BT BRI line works quite fine after roughly a minute once connected. The PBX can be seen at

Hi List, I have configured TE121PF card in E1 mode. I am using asterisk 1.6 and freepbx 2.7. My card staus turn in to green and looks like sync with the service provider. My service provider is BSNL - India. I have one toll free number for incoming and one land line number for out going calls. Problem : If i am calling to the toll free number, i am getting the ring but that call is

I applied the florz patch but my problems remain. Now I get all sorts of weird errors on the console and I cannot make outgoing calls. Incoming calls work as expected. I am using a single HFC-S card with BRI. Any clue what these errors below are? Ri = 44651 TEI msg = 3 TEI = 7f Ri = 3800 TEI msg = 3 TEI = 7f Ri = 42399 TEI msg = 3 TEI = 7f Ri = 42409 TEI msg = 3 TEI = 7f Ri = 22078 TEI msg = 3

Hi, I'm having problems with a new ISDN PRI in a new server. The cable is connected and the E1 modem seems to have issues with syncing (blinking light on the modem). versions: CentOS 6, asterisk 1.6.2.20, dahdi 2.5.0.1, libpri 1.4.12 ------------------------------------------------------------------------------------ dahdi show status T4XXP (PCI) Card 0 Span 1 RED 0

I've got some weird behavior on my HFC-s cards. asterisk CVS-06/26/04-21:28:35, bristuff 0.02, libpri 20040510, zaptel 20040623 When i pick up my ISDN phone on Zap5-1 ("3987") and call the external number "1901" it will do so, connect me and everything is fine. In the second, where it tries to attempt the native bridge, the audio will disappear. Using another card

Hi all, Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with Asterisk 1.6.2 and DAHDI BRI - to no avail. I had two servers so copied network setting etc from the working one, moved the card across, ran dahdi_genconf etc and it didn't work. Here's the console output with notices disabled: lucas*CLI> pri intense debug span 1 Enabled debugging on span 1 [Dec 16

Hi I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has cordless DECT extensions. I have set up asterisk on FC3 with two HFC cards and I am using the latest bristuff. I am trying to use * between my ISDN line and my PABX. One card is in TE mode and can receive and make calls OK. I can make and receive external calls to a SIP phone. I cannot get the other card to talk to my

I have 2 ISDN BRI boxes, each with 4 spans, where the first one is configured as CPE, the second one as NET(so I don't need real lines for developing and testing). Once in a while I do see the following libpri error messages simultaneously on both boxes: PRI Span: 1 TEI=0 MDL-ERROR (A): Got supervisory frame with F=1 in state 7(Multi-frame established) PRI Span: 2 TEI=0 MDL-ERROR (A): Got

Hi list! We currently have a PRI gateway composed by a box with two Digium quad-span PRI cards (a TE420 and a ). One of the cards is filled with TELCO1, while the other has first two slots filled with TELCO2, and 3rd slot with TELCO3. I am currently having (timer ?) issues on TELCO3 (span 7) D-Chan (202 as determined by dahdi_genconf ) is constantly failing causing on-going calls to terminate.

I have a working system with asterisk 1.4.26.2 libpri 1.4.1 and zaptel 1.4.12.1 With a digium TE205p. I am trying to update to libpri 1.4.10.2. When I do, incoming calls work but outgoing does not. When I do this I "rm /usr/lib/libpri*" then just install libpri-1.4.10.2 as normal. I then do a make clean in asterisk and make distclean ,then configure, make and make install. I do

Hi all, I really hope that you guys can help, because I've been tearing my hair out for the past 5 hours on this one. I have a Zaphfc (BRI) card in TE mode connected to the S-Bus of a Nortel Meridian phone system. Phone calls from the Nortel to say MSN 510 are correctly being sent to the right SIP phone. When asterisk dials say Zap/g2/224 (a Nortel internal extension) the call goes

I have an application where I need to send outbound prerecorded messages. The Asterisk "call file" process works fine if I am sending the call via SIP or IAX, but not via ZAP over a PRI channel. The destination device (my cell phone) never rings. The only unusual thing I see is on the fifth line of the "full" log, below, "channel.c: Don't know what to do with

Hello- I have a system with one D410P and one B200P (both OpenVox). All is well with the D410P, inbound and outbound, and I can initiate calls on the B200P BRI span, but there may be something wrong with my inbound BRI setup: there is no indication of an inbound call when I dial in to it from the PSTN. When I run "pri intense debug" and make a call to the BRI span, I can see a

I've this error How i can find the problem? Apr 23 12:24:43 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:47 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:24:48 WARNING[131081]: PRI: !! Got a UA, but i'm in state 1 Apr 23 12:24:53 WARNING[131081]: PRI: received TEI check request for TEI = 89 Apr 23 12:25:02 WARNING[131081]: PRI:

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.