similar to: Inbound DAHDI Error

We fairly recently switched service providers for our 4 PRI circuits. Since that time, we started to notice some failed inbound calls. These calls terminate with an ISDN cause code 47 'resource unavailble'. Most of the time I see this error on the first or second channel on the second span in a trunk group (This is the providers trunk group for hunting, not an Asterisk trunk group). All

The latest libpri is supposed to handle this properly, but doesn't seem to. Here's the debug info. CALLERID(name) is set to empty. < Protocol Discriminator: Q.931 (8) len=66 < TEI=0 Call Ref: len= 2 (reference 256/0x100) (Sent from originator) < Message Type: SETUP (5) < [04 03 80 90 a2] < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability:

Asterisk 1.8.4-rc2 (and 1.8.3) DAHDI Version: 2.4.1.2 libpri version: 1.4.12-beta3 We are having a problem with getting the nationalprefix option of chan_dahdi.conf to work. National calls do not have a "1" added to them when nationalprefix=1. The PRI debug shows the call coming in as a National Call, but the dialplan sees the call without a 1. chan_dahdi.conf: <snip>

Dear All, I am trying to setup an ISDN line from local telco on a digium card. The problem I am facing is that I am not getting any caller id from the telco. They say that they have enabled caller id. Please help me out. My zapata.conf -------------------------------------------------------------------------------------------------------------------- [trunkgroups] [channels]

I there, I have some trouble to do working caller id name for outgoing calls on the PRI we just installed. Caller id name work on incoming calls only. Caller id number work on incoming and outgoing calls. The provider, Goup Telecom, said that's in what i'm sending. They said that I send the cid name in ascii code and to do it working, I need to send it in hex. So I take some traces

I've having problems with a BT 2 span ISDN-30/Digium TE205P asterisk setup with outgoing calls not completing and requiring an Asterisk reset to 'unstick' span 1. Sorry this is a bit long but I'm completely out of my depth :-( This system has been in use for some while and I recently upgraded it to asterisk 1.4.24, zaptel 1.4.11 and libpri 1.4.9. I didn't change

I have a PRI E1 link between Asterisk 1.4.24 and Alcatel-Lucent OmniPCX Enterprise R9.0. As EuroISDN it works fine. However, I need to move to QSIG because of a firmware upgrade on the Alcatel PBX which doesn't support EuroISDN (please don't ask why). Besides, I've read somewhere that 2 B Channel Transfers "should" work with * 1.4, the latest 1.4 libpri and QSIG. So this

Hi I have done everything richard told to do ECT . below is my trace, anyone can help ? -- DAHDI/i1/09123278669-4 answered DAHDI/i1/88050048-3 -- Native bridging DAHDI/i1/88050048-3 and DAHDI/i1/09123278669-4 PRI Span: 1 Adding facility ie contents to send in FACILITY message: PRI Span: 1 ASN.1 dump PRI Span: 1 Context Specific/C [1 0x01] <A1> Len:11 <0B> PRI Span: 1

Hi all, using latest asterisk-svn I want to reflect an video call incoming via an PRI EuroISDN channel to another outgoing PRI channel, and I want the the outgoing channel to have the exact same bearer capability < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer capability: Unrestricted digital information (8) < Ext: 1 Trans mode/rate:

Hi, I tried to use Early Media: exten => 1,1,Playback(demo-thanks,noanswer) same => n,Hangup() But when calling my extension I do not hear the voicefile - I only hear the ring tone. In the Asterisk-Log I can see, that the voicefile is played. I got the same result when using "Progress()" in the first priority. I tried "pri set debug on span 1" and got the

Hi all, I just configures my PRI and incoming calls are working fine but outside calling giving error PRI is BUSY :( any idea ? I have same setup on other box and that boxes works perfect. -- DAHDI/i1/6463279153-2 is proceeding passing it to SIP/7328-00000002 -- DAHDI/i1/6463279153-2 is making progress passing it to SIP/7328-00000002 -- DAHDI/i1/6463279153-2 is busy -- Hungup

handled. So....what do I do? Thanks, MD =1=================================================== !! Invalid Protocol Profile field 0x11 -- Accepting call from '2004000' to '111' on channel 0/23, span 1 -- Executing NoOp("Zap/23-1", "Incoming call from Meridian1") in new stack -- Executing NoOp("Zap/23-1", " From number: 2004000|

I have a T1 link from asterisk 1.2.23 (also tried with 1.4.13) to a Meridian Option 61C. Calls either way drop with error "Channel 0/23, span 1 got hangup, cause 100". Can anyone offer insight into the cause and solution/workaround? (I tried upgrading to Ast 1.4.13, and upgrading matching zaptel & libpri, put the problem is identical). For testing, I tried a call from the

I have a working system with asterisk 1.4.26.2 libpri 1.4.1 and zaptel 1.4.12.1 With a digium TE205p. I am trying to update to libpri 1.4.10.2. When I do, incoming calls work but outgoing does not. When I do this I "rm /usr/lib/libpri*" then just install libpri-1.4.10.2 as normal. I then do a make clean in asterisk and make distclean ,then configure, make and make install. I do

picture. I know the firmware on the Nortel is old, so I'm guessing that libpri is sending something that the Nortel does not know how to handle. Is there a way to dumb down what libpri sends? From everything I've read PRI is an evolving standard - and older devices may struggle with newer extensions/developments. (This might be very handy for users trying to talk to old pbx's.) Is

Hey, I wrote yesterday about PRI dropping, which turned out to just be a regular reset of unused B-channels. This time there's a real issue. As noted earlier I have an ISDN-30 connection, a Digium TE-121 with VPMADT032 echo cancellation. These are my configurations files: == /etc/zaptel.conf loadzone=dk defaultzone=dk span=1,1,0,css,hdb3,crc4 bchan=1-15 dchan=16 bchan=17-31 == ==

Hello, I have an ISDN-30 connection and a Digium TE-121 with VPMADT032 echo cancellation. Every 30-60 minutes I experience PRI dropping. @@@ /etc/zaptel.conf: loadzone=dk defaultzone=dk span=2,1,0,ccs,hdb3,crc4 bchan=32-46 dchan=47 bchan=48-62 @@@ @@@ /etc/asterisk/zapata.conf [channels] switchtype=euroisdn usecallerid=yes group=2 signalling=pri_cpe context=incoming channel => 32-46

Hi, Starting in Asterisk 1.8.0, Asterisk supports connected line updates. This is fantastic for SIP. How can I prevent them from being sent to a PRI channel? I'm having problems when a call is answered by an internal SIP extension, then transferred (blind or attended) to another internal SIP extension. One of my PRI providers can't handle the ROSE_ETSI_EctInform APDU and drops the

Hi I am trying to deploy freeswitch with Digium TE121 card for my office setup, but it is continuously showing Signaling is up and channels are down except D channel. Our Architecture is like We have freeswitch installed with libpri1.4 and Dahdi. I am from India and here we are having E1 trunk. Dahdi Configuration is cat system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 7

We use asterisk 1.6 with DAHDI and a PRI ISDN 30 line in the Netherlands. Can anyone help me sorting out this issue?? Thanks in advance! -- Executing [s at macro-transfer:25] NoOp("SIP/joostkuif-00000003", "gehe= im") in new stack -- Executing [s at macro-transfer:26] NoOp("SIP/joostkuif-00000003", "voor= de SET CALLERPRES() =3D