similar to: IAX2 Trunk Encryption

Im having problems setting up a trunk between two locations. Heres the setup I have: Server A is connected to the PSTN at my datacenter Server B is connected to a clients e1 line at his datacenter I only want to route calls from Server B to Server A and out through the PSTN. Server A has a lot of other things connecting to it, so I need a very specific context for all calls to go through.

I saw someone mention on the security lists that IAX2 encryption has been around for about a month now. Is this true? Where can I find more info on how to set this up? Thanks!!

Hi, I have an audio quality problem regarding IAX2. I have 2 Asterisk servers interconnected via 2 LAN trunks at 1Gbps (no nat, no firewall). One trunk is SIP and the other IAX2. Normally, I use IAX2 but have noticed easily reproducible audio quality problems (voice in/out is OK but there's a "third" noise overlapping with a "scratchy sound" as if it were some kind of

Hi, I'm connecting 2 Asterisk servers with an IAX2 trunk. Trunk works fine in testing, no problems there but the Internet at server-A is an "on-demand" system that is based on the amount of http/https traffic going through it (or if the link is brought up manually/via scripting interface). As such there will be times that the link is down....workflow-wise this is not an issue (trunk

Hi all - We have several servers working just fine with IAX2 w/o trunk mode. We are trying to setup trunk mode to save bandwidth, but we can not achieve the savings with our current configuration (see below). When we place a call between * boxes A & B it works fine, but the command 'iax2 trunk debug' shows no activity for the trunk mode (1 peer, 0 calls). Anyone who has

All, I've almost got my Asterisk PBX setup, but I've having some problems with the VoicePulse IAX trunk. On outbound calls, when dialing a PSTN number through the IAX2 trunk, music on hold (moh, using the m option in the dial command) does not work. The console states that "stop sound" on IAX2 channel. Ring works, but only without the r option. MOH works when trying to dial a

Hi I've two boxes connected over IAX2 trunk before IAX I was using SIP trunk and they were working fine b'coz of bandwidth issue I changed from SIP to IAX now I'm facing a strange problem after some time on the cli of my asterisk box I see lots of messages of IAX2 trunk and b'coz of that my agents are not able to hear any thing and I've restart my * box. Please guide me what I

We use an IAX2 trunk to our remote office and would like for the receptionist to be able to transfer incoming calls from this trunk. but all calls come in as one user, Is there a way to get a breakout on the flash GUI of the incoming calls? Thanks, Justin

Hi, I have installed asterisk-1.8.25.0 on an Ubuntu server which has both an ipv6 ip and ipv4 ip(real ip) assigned. And I have a client ubuntu with only ipv4 ip(local ip) installed asterisk-1.8.25.0 . I want to configure the client asterisk with the server asterisk as IAX2 peer and want to connect to the IPV6 ip. I bind the server with ipv6 and also sending the registration request from the

I need to get 2 Asterisk servers working together. I have been reading and doing just about every example I have been able to find here on the list and the Wiki. It's now gotten to the point that nothing on box2 seems to be working. I seem to have a major problem understanding the format. Here is what I have so far. It's 3 days of hair pulling and nothing seems to work! Asterisk box 1

I have 1 * box having x100p installed and the other has no zaptel card at all. both of the * box has compiled in ztdummy module and both have been activated by modprobe ztdummy. When using trunk to connect the 2 *box. The one without zaptel card complaint about unable to accept trunked packet: no matching peer. On the one has zaptel card I have tried to remove the ztdummy module and connect

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

Hi I've two boxes connected over IAX2 trunk but suddenly my cli is getting flood with these messages: iax2_trunk_queue: Maximum data space exceeded and b'coz of that my agents are not able to hear any thing. when this happened that time there were 9 calls. my * version is 1.2.18 and 1.2.14 thanks arun -------------- next part -------------- An HTML attachment was scrubbed... URL:

I am trying to set up an IAX2 trunk between two servers. Server A has the following in iax.conf: [general] ... [ServerB] type=friend trunk=yes host=dynamic secret=myPassword context=myContext Server B has the following in extensions.conf: [outgoing] exten=>_40X,1,Dial,IAX2/ServerB:myPassword@x.x.x.x/${EXTEN} I am using bmtools to monitor the bandwidth usage, and I am not seeing a difference.

Hi all, I have a question: how can I see hints of a remote Asterisk in IAX2 trunk?? I want to set BLF on my phones to look state of other phones also in other Asterisk server. Someone have any idea or solution? I use Asterisk 1.4.24. Thanks all Marco -------------- next part -------------- An HTML attachment was scrubbed... URL:

Today has been the day for satellite questions, apparently, so I'll proxy one out to the rest of the community... I asked this tangentially a month or two ago, but I'll put it in a more blunt way: If you have IAX2 trunking mode experience over satellite, please let us know your experiences with that protocol/transport combination. I've got several people asking about IAX2 and

Respected Sir, I want your help regarding an issue on asterisk. I hope my mail will not disturb your daily routine. My issue is I am connecting two asterisk over IIAX2/SIP trunk. I have successfully connected multiple server and every client from one server to call any other server's client. But problem is I want to use Speex@ 2.15kbs and also packetization time is 60ms but I can not

Hi I was doing some bandwidth testing, and my incomming usage is 36% more than my outgoing bandwidth. The setup is IAX2 trunking using GSM codec. Is there any obvious reason I am overlooking to figure out why there is such a big difference between the two.? I am using CVS-head September 3rd, maybe there is a version skew? Any suggestions will be appreciated. Thanks Clive

Hi all, Just hit this problem for the first time: WARNING[17712] chan_iax2.c: Too much delay in IAX2 calltoken timestamp from address 10.25x.xxx.160 When I ran "iax2 show peers" everything comes up as unreachable, no calls are passed between the servers (as would be expected) but there is no problem with DAHDI / SIP channels. At the same time there are no network issues (can ping all

Hi all, There's a myriad of options these days and I haven't been keeping up to date with what's respectable any longer. I essentially need a provider that will provide me with one DID to start and let me trunk over SIP or IAX2. I'd like to obviously trunk with Asterisk on my end and have full control over the dial plan. This way I can branch out my DID into extensions and have