similar to: Spammer direct replying to those posting on the users list

I'm not sure if this is an Asterisk thing, a handset thing or a telco thing, so please be gentle with me if this is not the right place to ask ..... When placing a call over a SIP channel to a mobile phone, if the phone is engaged, it does not return a BUSY status straightaway. Rather, I get a ringing-out tone for the timeout duration specified in the Dial() statement; *then* I get

+1 spending money to get that many fxs ports is going to negate any savings of reusing analog phones instead of buying ip phones 1000 analog ports sounds like hell and if it was me I would be embarrassed to have a setup like that tied to my name if I was a consultant etc. Someone will come in after you and ask who set it up and the customer will say you :) On Feb 17, 2016 4:23 AM, "A J

Zitat von A J Stiles <asterisk_list at earthshod.co.uk>: > On Monday 06 Jul 2015, Luca Bertoncello wrote: >> Well, but for voice quality, which codec is better? >> alaw or gsm? > > A-law is better for voice quality (sorry, thought my original > explanation was > obvious). But note that if the destination is a mobile phone, GSM will be > used anyway, at

Zitat von A J Stiles <asterisk_list at earthshod.co.uk>: > Yes. You should definitely be using A-law for calls to the Outside World. Well, I wanted to change these settings, but I'm not sure, where I have to do that... I think in the users.conf, but I think, the "allow" keywords is for the network... How can I change this setting? Thanks Luca Bertoncello (lucabert

Hi, I've upgraded my asterisk 1.4 to the version 1.8.11. After making some adjustments to the configuration files to port it to the new version, calls between registered phones in asterisk, work fine, but inbound calls coming from the SIP trunk I have with a telco to asterisk, don't work anymore. I don't know why!... This is the SDP portion that comes in the INVITE messages of calls

Hi, I need to make calls to a list of numbers one at a time and once the user pick the phone connects to an IVR where I can get few data, after a call finishes the 2nd number get called and so forth. I'm familiar with Asterisk/Elastix but the Campaign feature on Elastix does not seem to fill this need. I'm now looking GoAutodial & AsterCC. Anyone with an idea to solve this issue I

Thanks AJ and David, We were actually using GSM gateways by setting busy forward number on the SIMs and just giving busy signal on every incoming call, telco took care of the forwarding and the line was free within seconds. Now we need to scale up the setup but GSM gateways a very very expensive if we want to scale upto a 1000 DIDs, which means thousand SIMs and a gateway/gateways big enough.

>>>>> "AS" == A J Stiles <asterisk_list at earthshod.co.uk> writes: AS> If you are paying for a business-grade Internet connection, you AS> should get a static IP address -- or a block of them -- as AS> standard. Maybe you need to change your ISP? In some places (including here) static ip is not affordable. -JimC -- James Cloos <cloos at

On Wednesday 17 Feb 2016, imperium broadcast wrote: > I kinda have it working with chan_sip. > > Dial(SIP/+${EXTEN}\;phone-context=+44 at 10.10.10.10;user=phone) > But it doesn't include the user=phone at the end when dialling out. > > "To: <sip:+4499999999999;phone-context=+44 at 10.10.10.10>". > > even adding > usereqphone=yes > to the

Hello all, Can someone recommend what hardware to use for a 1000 analogue line capacity asterisk PABX? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20160217/2bcd322f/attachment.html>

Yes, it is enabled on port 5060. I do receive a TCP ACK back from the server, so I know the TCP segment is received at the server hosting the Asterisk build. On Wed, Feb 17, 2016 at 8:36 AM, A J Stiles <asterisk_list at earthshod.co.uk> wrote: > On Wednesday 17 Feb 2016, Sonny Rajagopalan wrote: > > OK. Let me ask this. Is anything else necessary, except choosing TCP as > the

Hi! Is possible to use X100p TDM400P, Tdm410p, Tdm400, A400p, Ax400p or any others digium card FXO for use Fax modem? Thanks.

Hey Don, How are you? I may be heading your way in the next month or so. Have to meet with a guy in Eden Prairie, and stop off at my brother/sisterm-in-law's as well. Got a question for you - with TBCT, who pays for the call once it is transferred? Still me as the owner of the trunk? Lets say I take a call that was dialled locally (caller believes this is "free"), and I do a

Zitat von A J Stiles <asterisk_list at earthshod.co.uk>: Hi, > GSM is the native codec used for calls to mobile phones; it uses lossy > compression to achieve a low bit rate. > > A-law is the native codec used by physical exchanges on the land line network > (PSTN and ISDN). It is non-lossy. It works by arranging the "steps" closer > together near the zero

2015-02-26 10:45 GMT-06:00 A J Stiles <asterisk_list at earthshod.co.uk>: > > You just need to use call groups. > > In your chan_extra.conf (if it's an OpenVox) or chan_dahdi.conf, add > something like > group=1 > to the definition for each span. > > Now in the [globals] section of your dialplah, have something like > MOBILE=EXTRA/r1 > for an

Dear All, Is there anyone who is having FastAGI support for C & C++? We do have FastAGI working for the JAVA and rest of the language / script. But I am unable to find FastAGI for C/C++. Please let us know how to write FastAGI using C/C++. Thanks in Advance, Kashyap -------------- next part -------------- An HTML attachment was scrubbed... URL:

2015-02-27 10:25 GMT-06:00 A J Stiles <asterisk_list at earthshod.co.uk>: > O.K. So what does your existing Dial() statement in extensions.conf look > like? > apology, put the gateway was sangoma but is a openvox , all my outgoing calls out for this context: [my-mobile-out] exten => _NXXXXXXX,n,Dial(SIP/1003/${EXTEN},55,rT) exten =>

Another "me too" (also Gmail). I just received my 4th "account suspended, too many bounces" email, after having several days of lost mailing list content over a short vacation break the last time. When I notified the admin email account of the failure, it seemed the responder missed the point about the emails, saying the link had expired (it had been more than three days

The solution you choose should be based on many factors which should include your business requirements, team's experience, your budget, growth expectations and more. You can choose Asterisk or Freeswitch as a platform and start building on that - but it is not simple and being new to VoIP you are likely to make mistakes. The "do-it-yourself" approach will some money initially, but