Displaying 20 results from an estimated 4000 matches similar to: "Problem with "pri show channels" on rasterisk (11.7)"
2014 Jan 14
2
patlooptest output - errors
Hi there,
Running patlooptest following instructions on Digium KB, using dahdi 2.5.1
with a TE205P. I'm getting this kind of output (not full output). Note, I'm
using a standard cat5 ethernet cable (30cm), with a Digium T10i crossover.
Error 4985 (loop 19898, offset 425, error 214): Unexpected result, Read:
0xff, Expected 0x00.
Offset 422 { ff ff ff ff ff ff ff }
Error 4986 (loop
2006 Apr 10
3
E1 PRI problem with TE205P
Hi all,
I've setup a PBX in production environment last week but we have immediatly
find out drop conversations and lot of errors (in asterisk logs) like:
Apr 10 17:30:48 NOTICE[25154] chan_zap.c: PRI got event: HDLC Bad
FCS (8) on Primary D-channel of span 2
My configuration is:
Motherboard: SuperMicro P8SCT (Intel E7221 chipset)
Hypertrading and APIC enabled
CPU: P4 3GHz
Digium TE205P
2007 Apr 21
3
FAX on PRI and TE205P
Hi
i have a PRI connected to a TE205P.
Actually, can i send and receive FAX through Asterisk using stable solutions?
Or shall i connect an ATA to Asterisk and then a modem with Hylafax?
--
/*************/
nik600
https://sourceforge.net/projects/ccmanager
https://sourceforge.net/projects/nikstresser
2006 Oct 26
1
PRI (TE205P) allways RED/NOP
I have a TE205P, jumpered for E1, added the missing wct4xxp-line to
/etc/modprobe.d/zaptel, zaptel.conf is just
span=1,1,0,ccs,hdb3,crc4,yellow
span=2,2,0,ccs,hdb3,crc4,yellow
bchan=1-15
dchan=16
bchan=17-31
bchan=32-46
dchan=47
bchan=48-62
Which, according to my reading of the documentation I could find, should be
correct. ztcfg doesn't complain about anything, yet all I ever get is RED
2007 Mar 07
1
AsteriskNow Beta 4 - zaptel.conf / zapata.conf problems
I have recently installed Asterisk Now Beta 4 (32-bit) with three Digium
cards - 2 Wildcards TE400P (one with 4 FXS modules and one with 4 FXO
modules) and a TE205P dual E1/T1 card. The problem is with the TE205P
and configuring the /etc/zaptel.conf and /etc/asterisk/zapata.conf
files. I go in and add the required lines to configure the TE205P and
restart Asterisk.
All is fine until I reboot the
2007 Apr 15
3
Digium TE205P and channelbank
Trying to find my feet here. If I wanted to connect Asterisk to a PRI and
throw in a T1 Adtran channel bank into the mix for fax machines would the
following work?
Connect PRI line from telco to Port 1 on the Digium Wildcard TE205P.
Connect Adtran TA-624-T1 to Post 2 on the Digium Wildcard TE205P
also, would I need a crossover to the channelbank or is it a patch lead
like the connection to the
2007 Mar 15
2
Help! Echo problem even at T1 PRI?
Hello,
We have an asterisk setup at our client's site using a TE205P. The line to
telco is a 23 channels T1 PRI, however the line has random echo problems
(about 5-10% of the calls)!
Can anybody tell me if echo cancellation is really needed even at a T1 PRI
to the telco? Because people keep saying when they deploy voip solution in
Hong Kong using T1 PRI, there is no need of echo cancellation.
2005 Sep 28
2
TE205P in loopback?
2006 Mar 22
2
connecting Avaya Partnet with asterisk , TE205P
Hi ...,
I've a TE205P card installed in my asterisk box.Port 1 of my card is connected to service provider.From port 2 I want to connect Avay Partner system.
what type of cable I require to connect the partner system (straight/cross over). How the call routing from outside will be done to epbx.
Thanks inadvance
regards
rudra
-------------- next part --------------
An HTML attachment
2006 Feb 20
3
Dell PowerEdge 2850
Hello,
Digium uses the Dell PE 2850 for their testing. This site says that 3.3V PCI slot.
http://www.voip-info.org/wiki/view/Asterisk+hardware
We are planning on purchasing a Dell PE 2850 and putting a TE205P card on it. However, the needs a 5V PCI slot. Does Dell PE 2850 has a 5V PCI slot? A person in our group tried to call Dell's customer support but they do not seem to know.
2007 May 23
3
TE205P, E1, Panasonic PBX and hang-up issues
Hey folks,
I have a Digium TE205P working as a man in the middle:
PRI line -------- Asterisk/TE205P -------- PBX
The PBX is a Panasonic KX - TVP 100.
Everything is working great except for one little issue. Asterisk isn't
hanging up the PRI B channel when the PBX channel is hung up.
I don't want to overload you with information but please ask if more is
needed. I suspect I'm
2009 Feb 09
1
Noisy Ring Back Tone with TE205P card
Hi,
I am having problems with an Asterisk with a Digium TE205P card. The
issue is that the Ring Back Tone is noisy. I am making modem's calls and
this noise influences on the initial negotiation protocol, so modems
have to recall.
My configuration is:
Asterisk version: Asterisk 1.4.21.2
Linux version: CentOS release 5.2 (Final)
Card: Digium TE205P
2008 May 20
5
Server recommendation help
I am having a issues with adding a analog card to my dell 2800. I
already have a t1 card installed and running fine but when I install the
analog card asterisk will not start (ztcfg fails). I have determined it
is because of a IRQ problem and have decided to get a new server. Can
anyone suggest a server grade setup that supports this? I would rather
not buy a machine that will be unstable. I
2006 May 04
2
DTMF detection when outgoing call to mobile phones
Hi all,
I am trying to detect DTMF keys from a mobile when asterisk make an
outgoing call to the mobile.
The DTMF detection on incoming calls (also FROM mobiles) is working very
well.
The only problem is if asterisk called the phone... Nothing is detected.
I am using a digium te205p with PMX/PSTN connection.
Everything that I can find in forums are problems with dtmf detection on
SIP.
Any
2007 Mar 01
4
Cannot hear ringback music from telco
Hello,
We have an asterisk 1.2.13 box that use a Digium TE205P T1 PRI connect to
the telco, users mainly use snom 320/300 SIP phones.
When dialing to an external phone number with custom ringback music, users
reported that they could not hear the music but can only hear the standard
ring tone generated by the system.
Is there any kind of settings need to allow the ringback music pass to the
2006 May 10
1
ISDN, TE205P, I'm goind crazy :>
Hi guys,
Currently I just purchased the TE205P for the installation of my ISDN30 setup. I
compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31
channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16
is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels
configured, and then, when I do a cat /proc/zaptel/2 I see
2008 Apr 02
1
TE205P
Hello,
I am working on a project and have a few questions. I want to connect
one port of the TE205p to the PSTN, and another port to the PRI port
of a PBX. Basically Asterisk will sit between the PSTN and the
existing PBX. Are there any gotcha's I need to be aware of? Will the
existing PBX be able to dial through asterisk as if it was a PSTN
connection?
--
Isaac McDonald
Got VoIP?
imcdona
2006 Feb 11
2
configure TE205P on asterisk@home
hi
i'm trying to configure a TE205P on asterisk@home
i've edited /etc/sysconfig/zaptel adding this line:
MODULES="$MODULES wct2xxp"
now, when the system is loading, i can see that the wct2xxp module is
loaded correctly
but if i try the command:
/usr/local/sbin/genzaptelconf
i get:
STOPPING ASTERISK
STOPPING FOP SERVER
Generating '/etc/zaptel.conf'
Generating
2016 Mar 03
4
Rasterisk freeze on 4G link
Hello,
I'm remotely managing an asterisk setup using an OpenVPN client on this
Asterisk box, connecting to an OpenVPN server of mine).
This box is mainly connected to PSTN.
It is also connected to the Internet, only for remote management.
The former ADSL link has recently been replaced by a new 4G link (UMTS).
I'm connecting to this box from a Debian Jessie/Gnome Terminal combo.
With
2009 Oct 07
2
Can dial long distance but not local?
AsteriskNOW 1.4.26.2 with a Digium TE205P connected to an ISDN PRI
(single span). I'm sure I just have something goofed up in the
dialplans? I have a bunch of Polycom 331 IP phones connecting to the
server. I can dial the other extensions in the system fine and I can
dial long distance outgoing but cannot seem to get it to dial local (7
digit) calls.
I see this in the CLI:
--