similar to: From: "Unavailable" <sip:asterisk@server.com>; tag=as120a1079.

Im trying to get my asterisk box to register to a sip provider without much success. here is my console output in asterisk Dec 13 12:57:17 NOTICE[213005]: chan_sip.c:3982 sip_reg_timeout: Registration for 'voicemail.nexband.com@metaswitch.nexband.com' timed out, trying again -- Got SIP response 403 "From: URI not recognized" back from 208.149.73.5 Urgent handler in my

I'm attempting to connect to a Metaswitch, inbound only (at this time). The Metaswitch is the only "connection" (at this time). All I'm getting so far is a bunch of "OPTION" messages which my Asterisk box replies to but I don't get inbound calls. Here's my sip.conf. As you can see I've been trying a bunch of different options without success :(

I'm (still) trying to get my Asterisk box talking to a Metaswitch. All I'm getting is a "heartbeat" of OPTIONS messages coming from the Metaswitch which my Asterisk box replies to. The exchange looks like: <-- SIP read from 172.b.c.d:5060: OPTIONS sip:metaswitch@206.b.c.d:5060;transport=udp SIP/2.0 Via: SIP/2.0/UDP

Thanks Brian, and thanks again for the included definitions <grin> - that helped too. Your comments are really helping clear many questions. I suppose our intensions are to become an IXC. So if my local carrier is sporting old technology, they'll provide TDM services. So if I understood you correctly, the "in-band signaling" is typically SS7, and the alternative is typically

I am setting up VM off Metaswitch due to a problem with Metaswitch VM. I have a couple days to prove this works and I need a little assist please. I am using TRIXBOX 2.6.2.5 and have the Meta SIP trunk up. I have extensions built that can talk to each other. I took a trace on the TRIXBOX that shows when I dial my test phone on Metaswitch it goes to VM after a couple rings and the call goes to my

Hi folks, I am having a small problem with asterisk-1.6.2.7 + app_fax on OpenBSD 4.7 -release. Everything seems to work fine. I have a macro which answers, receives the fax to a tiff, and then runs a script (mailfax) to convert that to pdf and email it. It all works perfectly except for some errors I am seeing in the console. After it hangs up I get a dozen or so messages in the cli

Hello, I''m trying to port one of our existing appliances (running on 64-bit Red Hat Enterprise Linux 6.4) to a Xen HVM guest . We''re seeing some very odd behaviour that doesn''t manifest on other platforms. The guest experiences intermittent lockups of a few seconds- shell sessions become unresponsive, and various software healthchecking in our application triggers,

I've been racking my brain for the last two days to try to figure out what I could possibly be doing wrong in my configuration for a SIP trunk that's setup through my local ISPs Metaswitch. I've setup a very simple SIP Peer, which I've played around with a lot in the past two days but still comes back to the following basic setup: [provider-fireball] type=friend

Hi All, I'm stumped on a weird problem. I have an * server working fine for local SIP phones and IAX2 connections. We just provisioned a second Ethernet port to attach to a local SIP provider. PSTN calls incoming work fine: PSTN -> SIP Provider -> SIP -> * but outgoing calls are not. Call setup takes place and the caller can hear about 1-2 seconds of audio before the SIP provider

I'm trying to send CallerID info to a MetaSwitch system over a PRI. The MetaSwitch gets the info exactly as it is sent by Asterisk, but I think it might be having trouble with the Hexadecimal b1 that is being sent just before the first character of the CallerID Name. Does anyone know what the significance is of the b1 being sent here? Or, is there a way to make Asterisk not send the b1

Hello Everyone, We are looking for a simple open source auto dialer with "polling" capabilities. What we would like is a program that we can upload leads to, and have asterisk: i) Dial numbers ii) Play pre-recorded iii) If user presses one, forward the call to an agent There are so many solutions out there it's hard to make a decision on what works, what has just a limited free

Greetings, I have a problem getting Asterisk registered as a UAC against the MetaSwitch call agent, because the customer insists on running it on a NAT'd box. Thus, the Contact: field in the REGISTER request betrays the private IP address of the Asterisk box, but the source IP of the message is a public one. Most registrars don't have a problem with this, including Asterisk. However,

I am having difficulties with customer-bound DTMF being very short & clipped off (and basically unusable, as systems on the customer side aren't recognizing the DTMF digits, and I can barely tell that DTMF is there when I listen on a handset). My system set up as follows: PSTN <--> Metaswitch <-SIP-> Asterisk <-SIP or IAX2-> CPE Asterisk is running Asterisk 10.4.0 on a

Hello Everyone, I have gone through a few really good tutorials from the OpenSIPS site, Asterisk resources etc.. The unanswered question (and final piece of our puzzle) is if it's possible to have a register free environment in an OpenSIPS/Asterisk integration. Most approaches have OpenSIPS relay the UA's REGISTER request to Asterisk which has "host=dynamic" set for the

When I make an outbound call I hear a half of a ring and than silence until the call opens up. It seems asterisk is sending a 183 after the 180 message. My CPE device does not support multiple 18x messages in the same call setup. When we receive the 180 we present ring back to the phone, but when we receive the 183 we get confused and stop the ring back tone, but do not open up the early media

Hello, as a variation of our issues with Adhearsion calls dropping when an INVITE comes in for a bridged call, I now have a new issue to contend with. Our call is in an AsyncAGI application, and has been bridged to another channel. The provider that supplies the DID sends a polling reINVITE every 15 minutes (it's a documented Metaswitch behavior amongst others). The reINVITE is seen as a new

Hello Everyone. Our environment is a register free setup, and our phones are set as host=dynamic. The problem we are experiencing is for inbound calls: Name/username Host Dyn Forcerport ACL Port Status Realtime 222/222 (Unspecified) D N A 0 Unmonitored Cached RT So when we DIAL 222 we get: WARNING[23103]: app_dial.c:2198 dial_exec_full:

Long story... Would be nice if we can remove this on BYEs X-Asterisk-HangupCause: Normal Clearing. X-Asterisk-HangupCauseCode: 16. Kind Regards, Nick. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140723/09e97fd1/attachment.html>

I recently configured a SIP peer which i must specify my fromuser as my ten digit "DID". I send calls to this peer, but whenever Asterisk sends an options message, the fromuser is "asterisk". Is this a bug? Or is there some other config I must make ? register = 2155551941:123456 at 10.0.138.226/2155551941~600 [peer](!) type=peer context=inbound qualify=yes

I'm using FreePBX/Trixbox with Asterisk 1.4.17-1 trying to register against a Sylantro server in front of a Metaswitch. I'm able to register and receive inbound calls but outbound calls are rejected by the far end. The username and password have been checked repeatedly. Putting the same authentication and server IP into a softphone or polycom phone work fine for inbound and outbound