asterisk users - Mar 2011 - Metaswitch to Asterisk problems

I am setting up VM off Metaswitch due to a problem with Metaswitch VM. I have a
couple days to prove this works and I need a little assist please.

I am using TRIXBOX 2.6.2.5 and have the Meta SIP trunk up. I have extensions
built that can talk to each other. I took a trace on the TRIXBOX that shows when
I dial my test phone on Metaswitch it goes to VM after a couple rings and the
call goes to my TRIXBOX and asterisk plays a RTP message saying that the number
cannot be contacted.

I don't understand how the TN on Metaswitch translates to the TRIXBOX VM
account.

Can I please get a response on or off forum for some assistance in what I am
doing wrong or if there is a good post or website with a guide on this config..

I have looked at several online over that last couple of weeks and they are
dated and not running TRIXBOX 2.6.2.5, so trying to conform what I am reading to
my config is confusing.

Thanks in advance.

V/r

Chris Ledford
CCNA/CCSP/CCNP Voice
Comptia A+/Net+/Linux+/Sec+
EWC/CTTC(sw) USN
T3 Engineer
http://navy.togetherweserved.com/profile/13552
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20110310/bb5fd7a8/attachment.htm>

Make sure you get some DNIS, on the meta you might have to play around
to get it, it might come in in the form of some sip headers or as
asterisk expects it as an extension. In any event, once asterisk knows
which extension (DID) it belongs to just send it to VM.


On Thu, Mar 10, 2011 at 10:02 AM, Chris Ledford
<chris.ledford at cnxntech.com> wrote:
> I am setting up VM off Metaswitch due to a problem with Metaswitch VM. I
> have a couple days to prove this works and I need a little assist please.
>
>
>
> I am using TRIXBOX 2.6.2.5 and have the Meta SIP trunk up. I have
extensions
> built that can talk to each other. I took a trace on the TRIXBOX that shows
> when I dial my test phone on Metaswitch it goes to VM after a couple rings
> and the call goes to my TRIXBOX and asterisk plays a RTP message saying
that
> the number cannot be contacted.
>
>
>
> I don?t understand how the TN on Metaswitch translates to the TRIXBOX VM
> account.
>
>
>
> Can I please get a response on or off forum for some assistance in what I
am
> doing wrong or if there is a good post or website with a guide on this
> config..
>
>
>
> I have looked at several online over that last couple of weeks and they are
> dated and not running TRIXBOX 2.6.2.5, so trying to conform what I am
> reading to my config is confusing.
>
>
>
> Thanks in advance.
>
>
>
> V/r
>
>
>
> Chris Ledford
>
> CCNA/CCSP/CCNP Voice
>
> Comptia A+/Net+/Linux+/Sec+
>
> EWC/CTTC(sw) USN
> T3 Engineer
> http://navy.togetherweserved.com/profile/13552
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
> ? ? ? ? ? ? ? http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> ? http://lists.digium.com/mailman/listinfo/asterisk-users
>