similar to: CentOS 5 and the nvidia driver

I installed the kernel-2.6.18-8.el5.src.rpm today and went to build it, but it fails with this error: $ rpmbuild -bp --target=`uname -m` kernel-2.6.spec Building target platforms: x86_64 Building for target x86_64 error: Failed build dependencies: unifdef is needed by kernel-2.6.18-8.el5.x86_64 I double checked and this appears to be the latest kernel source rpm on centos/5.0/os/SRPMS.

I installed the memory and the CPU and the motherboard and the new video card all together tonight. CentOS installed very nicely and I'm currently running the CentOS-Plus version, with which I _can_ access my Windows partitions. Well, one of the disks is getting flaky and I'm having trouble with it - of course, that's the one I need the most. Glitches, with which I would be

I know this is a little off topic (not as usual, dammit!), but I figure at least one of y'all can handle this one. I have tried to configure my CentOS4.4 Plus desktop for samba sharing with the VMWare Windows that runs on it. However, no matter what I've done so far, I can't get the Windows to recognize this machine as a legitimate network destination. Here's my samba

I'd like to point out that overall I am quite pleased with CentOS 5, although I am having more fun with it than I did with 4.4 and I knew less about CentOS then (duh). Most things seem to work fine, including a relatively smooth installation from the DVD image I downloaded, although the number of screensavers I can see (and this could be related to the ATI/dual head problem) is pathetically

This might be a gnome problem, but.... I've noticed that, on occasion (frequently), when I try to look at or modify my display configuration, the Applications->System Settings->Display doesn't come up. It asks for the root password, which I give it, and then nothing. I ran system-config-display form the command line, but it dies thus: [root at mhullrichter mhr]#

I want to convert all my NTFS partitions to ext3 since I'm no longer running Windows, at least on my main machine at home. I'm planning to tar the NTFS partitions to an existing ext3, reformat the partition as ext3 and untar it back. What is the best way to accomplish step two of this - reformatting the partition? I've only done this so far during the installation phase, and that

On 4/25/07, Michael D. Kralka <michael.kralka at kvs.com> wrote: > > I am going to regret answering this, because it is not the right place > for such questions. However... True, but thank you for the post. > I suspect you are misusing printk and the KERN_XXX prefixes (KERN_DEBUG, > KERN_ERR, KERN_INFO, etc.) defined in include/linux/kernel.h. Try > dropping the comma

I went to enable samba on my home machine, which has a largely plain vanilla install of CentOS 4.4 Plus, and the smbd and nmbd files are missing. As you may know, this makes it rather difficult to run samba. For some reason, the winbindd binary is present, and rpm reports: samba-common-3.0.10-1.4E.11 samba-client-3.0.10-1.4E.11 as present. So how do I retrieve the missing samba binaries/ Do

I recently added a Seagate 400Gb SATA drive to my system, and it has been behaving strangely since I put it in. for one thing, the BIOS S.M.A.R.T. came up with a warning the last time I booted with it enabled, saying that I should backup my data and replace the disk (!). I still have not made any irreversible data transfers to this drive, and I have some time yet to take it back, but I'd

I rebooted my machine this morning and now instead of running normally, my GLMatrix screen saver flashes as it repaints the screen, more and more noticeably as the screen fills up with glyphs. I didn't change ANYTHING and this was not happening before the boot. Anyone have any ideas why this might be? Thanks. Mark Hull-Richter, Linux Kernel Engineer DATAllegro (www.datallegro.com) 85

I know this is a bit OT, but the subject of CPU speed came up here and I was (and have been for some time) curious: What is the actual speed of an AMD CPU? E.g., I have a Athlon 64 X2 "4200+" but my /proc/cpuinfo shows 1005.164 MHz for the two cores. What do those mean? Is there a reference for this (huge) discrepancy? Also, is there a way (and what) to tell what the actuall running

I had to reboot my work machine today, and it came up in text mode (!). I did an init 5, but that had no effect (wrong command?). I killed the three gdm processes, and voila, X server mode. Where do I look to find out what is not right here? Thanks. -- Mark Hull-Richter, Linux Kernel Engineer DATAllegro (www.datallegro.com) 85 Enterprise, Second Floor, Aliso Viejo, CA 92656 949-680-3082 -

I could swear that this was working just last week, but now when I run the Adobe Acrobat reader, it hangs. If I run it "directly" (/usr/bin/acroread) with -DEBUG as the first argument, I get an infinite loop of: expr: syntax error I tried removing and reinstalling it, but no change. Any ideas? -- Mark Hull-Richter DATAllegro (www.datallegro.com) 85 Enterprise, Second Floor, Aliso

I notice that the OO that comes with CentOS 4.4 is version 1.1.5, which is fairly ancient. Are there any plans to update this for OO 2.2, or 2.1, or 2.0? Or is this a RH thing exclusively? In which case is CentOS Plus likely to get a more recent version? OO 2.0 is way better.... Mark Hull-Richter Linux Kernel Engineer (949) 680-3082 - Office (949) 680-3001 - Fax (949)

I just bit the bullet and installed CentOS 5 on my work desktop, and although I have two monitors and a card that supports them, I cannot get the display configuration to work with both as a continuous (spanning) desktop. I have tried using the correct (autodetected) monitor type (digital and analog), a generic LCD with 1280x1024, nothing works. Every time I set the configuration, the X server

I have been following the wiki on how to build a custom kernel, and it works great. Except, I am doing ongoing work with the internals of the kernel, and it is really awkward to set up a change and then build it using the standard methodology (edit the file to change, diff it against the original to make a patch file, rebuild the whole thing). Isn't there a way (and what is it) to play

I am experimenting with the kernel (as some of you may know), and I have added a whole slew of traces in some relatively sensitive code in the lower levels of the page cache and i/o functions. Most of this tracing not only works but is highly revealing as to what the kernel is doing and why. However, I am now getting this odd content in the trace log (dmesg), and I cannot figure out what it is

I thought I had all the tools I needed for this, but it seems something is missing. When I build the 2.6.18-8.1.3 kernel from source, I get this error: extracting debug info from /var/tmp/kernel-2.6.18-8.el5.trace-root/usr/src/kernels/2.6.18-8.el5.trace-x86_64/scripts/conmakehash extracting debug info from

Due to the peculiar way that my root drive is configured (incomplete advance planning for Windows to Linux conversion), I have had thoughts about moving /boot and / to a different place on the drive. Current configuration is: sda1 - 30Gb primary partition (was the E: drive) sda2 - 120 Gb primary partition (was my H: drive) sda3 - 100Mb /boot primary partition sda4 - Extended partition sda5 - 4Gb

I have been chasing down the way the inode and page caches are structured and handled, but there is a mystery I have not been able to track down yet. How does the I/O queue that dirty inodes and pages are put into when it's time to flush them out to disk get picked up? Also, where are the sources for the I/O schedulers? I haven't been able to locate them yet either. I know this