similar to: ISO mag card encoding and writing

All, I am trying to configure hdlc support on T100P Digium card - everything seems ok... but it just does not work at all. I was able to compile all drivers, the light on the card becomes green when I plug T1 link.... but I even can't ping default router IP... there is no data coming back to me, so I am confused completely now. Also I tried both protocols - raw hdlc and cisco hdlc. The

short copy from a kubectl describe pod... Events: FirstSeen LastSeen Count From SubObjectPath Type Reason Message --------- -------- ----- ---- ------------- -------- ------ ------- 5h 54s 173 kubelet, k8s-bootcamp-rbac-np-worker-6263f70 Warning FailedMount (combined from similar events): MountVolume.SetUp failed for volume "pvc-fa4b2621-7dad-11e7-8a44-062df200059f" : glusterfs:

On Mon, 2016-02-08 at 14:22 -0800, John R Pierce wrote: > the only truly safe way to destroy data on magnetic media is to grind > the media up into filings or melt it down in a furnace. I unscrew the casing, extract the disk platter(s), slide a very strong magnet over both sides of the platter surface then bend the platter in half. How secure is that ? I can't afford a machine that

Just created the container from here: https://github.com/gluster/gluster-containers/tree/master/CentOS And used stock Kubernetes 1.7.3, hence the included volume plugin and Heketi version 4. Humble Devassy Chirammal <humble.devassy at gmail.com> schrieb am Do., 10. Aug. 2017, 18:49: > ?Thanks .. Its the same option. Can you let me know your glusterfs client > package version ?? >

Ok, thanks. Humble Devassy Chirammal <humble.devassy at gmail.com> schrieb am Do., 10. Aug. 2017, 19:04: > On Thu, Aug 10, 2017 at 10:25 PM, Christopher Schmidt <fakod666 at gmail.com> > wrote: > >> Just created the container from here: >> https://github.com/gluster/gluster-containers/tree/master/CentOS >> >> And used stock Kubernetes 1.7.3, hence the

?Thanks .. Its the same option. Can you let me know your glusterfs client package version ?? On Thu, Aug 10, 2017 at 8:34 PM, Christopher Schmidt <fakod666 at gmail.com> wrote: > > short copy from a kubectl describe pod... > > Events: > FirstSeen LastSeen Count From SubObjectPath Type Reason Message > --------- -------- ----- ---- ------------- -------- ------

Hi, could anybody suggest a usable doorphone and magnetic door opener "hardphone" system for me, please? Of course should be connectable to asterisk. I am in the EU, should be available here. thank you, Csaba

On Thu, Aug 10, 2017 at 10:25 PM, Christopher Schmidt <fakod666 at gmail.com> wrote: > Just created the container from here: https://github.com/gluster/ > gluster-containers/tree/master/CentOS > > And used stock Kubernetes 1.7.3, hence the included volume plugin and > Heketi version 4. > > ? Regardless of the glusterfs client version this is supposed to work. One patch

As an another solution, if you are updating the system where you run application container to latest glusterfs ( 3.11) , this will be fixed as well as it support this mount option. --Humble On Thu, Aug 10, 2017 at 10:39 PM, Christopher Schmidt <fakod666 at gmail.com> wrote: > Ok, thanks. > > Humble Devassy Chirammal <humble.devassy at gmail.com> schrieb am Do., 10. >

Yes, I tried to, but I didn't find a 3.11 centos-release-gluster package for CentOS. Humble Devassy Chirammal <humble.devassy at gmail.com> schrieb am Do., 10. Aug. 2017, 19:17: > As an another solution, if you are updating the system where you run > application container to latest glusterfs ( 3.11) , this will be fixed as > well as it support this mount option. > >

On Wed, 10 Jun 2020 11:31:33 +0100 "Richard W.M. Jones" <rjones@redhat.com> wrote: > I finally got access to the container. This is how it's configured: > > * / => an overlay fs. > > There is sufficient space here, and there are no "funny" restrictions, > to be able to create the libguestfs appliance. I proved this by > setting TMPDIR to a

I need to have an AD user that need to *write* in an users LDAP field. The user case is a MFP (a set of MFP, indeed) that have RFID auth, and so need to 'register' the RFID cards. Seems to me that i have to use dsacl/samba-tool acl ds, but i don't found a way to set the property for every user. EG, assign write permission to user 'mfp' to field 'pager' for every

> -----Original Message----- > From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On > Behalf Of EGO-II.1 > Sent: den 9 februari 2016 09:00 > To: CentOS mailing list > Subject: Re: [CentOS] Utility to zero unused blocks on disk > > > > >> the only truly safe way to destroy data on magnetic media is to grind > >> the media up into

Dear listers I am a very newbie with graphs in R. I have a pulmonary function prediction equation in the form of PVC = 1.1 - 0.45*age in years + 0.011*height in cm. How can I draw the corresponding nomogram?. I read the help for the design.nomogram function but it is too difficult for me. Excuse my ignorance. Any direct help will be appreciated. Thanks in advance.

Hello, I am trying to setup GitLab, Redis and PostgreSQL containers in Kubernetes using Gluster for persistence. GlusterFS nodes are setup on machines (CentOS) external to Kubernetes cluster (running on RancherOS host). Issue is that when GitLab tries starting up, the login page doesn't load. It's a fresh setup and not something that stopped working now. root at

Getting this answer back on the list in case anyone else is trying to share storage. Thanks for the docs pointer, Tanner. -John On Thu, Sep 7, 2017 at 6:50 PM, Tanner Bruce <tanner.bruce at farmersedge.ca> wrote: > You can set a security context on your pod to set the guid as needed: > https://kubernetes.io/docs/tasks/configure-pod-container/security-context/ > > > This

Posting here in the hope that some one may have encountered problems with recovery from backups on LTO4 media and found a solution. Back ups on FujiFilm LTO4 media (800/1600). Archives created using tar -cf /dev/nst0. ?The tapes were fine when the archives were created (tested by extracting random sample files from them) but something went wrong in storage (no physical damage). Now a few LTO4

On 01/06/2016 01:23 AM, Jeremy Allison wrote: >> Jan 5 23:17:32 storage4 nmbd[34068]: [2016/01/05 23:17:32.086480, >> 0] ../source3/nmbd/nmbd_packets.c:1174(process_lanman_packet) >> Jan 5 23:17:32 storage4 nmbd[34068]: process_lanman_packet: >> Discarding datagram from IP 172.21.140.17. Source name STORAGE4<00> >> is one of our names ! >> " >

hi, i am trying to teach myself about ARIMA models. i have followed examples from a number of sources and have more or less got the hang of how it works. i would like to compare the output from the fitted model to the original data. is this possible? or even a meaningful thing to do? to be clear, for example, having generated a fit to some data using > fit <- arima(LakeHuron, order = c(1,

Are you seeing issue or error message which says auto_unmount option is not valid ? Can you please let me the issue you are seeing with 1.7.3 ? --Humble On Thu, Aug 10, 2017 at 3:33 PM, Christopher Schmidt <fakod666 at gmail.com> wrote: > Hi all, > > I am testing K8s 1.7.3 together with GlusterFS and have some issues > > is this correct? > - Kubernetes v1.7.3 ships