similar to: HP "smart array"

Hello all I'm gathering the output of the hpacucli program from as much configurations as possible. If you can find some free time for me, can you send me the output of: hpacucli ctrl all show detail hpacucli ctrl slot=1 show config hpacucli ctrl slot=1 array all show hpacucli ctrl slot=1 array A show hpacucli ctrl slot=1 physicaldrive all show hpacucli ctrl slot=1 physicaldrive 2I:1:1

Jason Warr wrote: > On July 10, 2015 11:47:09 AM CDT, m.roth at 5-cent.us wrote: >> Hi. Anyone working with these things? I've got a drive in "predictive >> failure" on in a RAID5. Now here's the thing: there was an issue >> yesterday when I got in, and I wound up power cycling the RAID; >> first boot of attached server had issues, and said the

Hi. Anyone working with these things? I've got a drive in "predictive failure" on in a RAID5. Now here's the thing: there was an issue yesterday when I got in, and I wound up power cycling the RAID; first boot of attached server had issues, and said the controller had a failure, and a drive had failed, and wouldn't continue booting; when I gave it the three-finger salute,

I had to install C5 on a dev server for various reasons (legacy system support and so forth). This dev server is a HP DL180 G6, with a SmartArray P410 raid card... I've installed hpacucli via the RPM from HP's site, but its not finding the controller... C5 (64 bit) is using the default CCISS drivers for this card. # hpacucli ctrl all show config Error: No controllers detected.

On 10/07/15 10:06, John R Pierce wrote: > On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >> Got an old HP box with a P800 Smart Array controller. The HP RAID >> box >> plugged into it's failing, and we got a new JetStor. Anyone know if we >> can just plug the JetStor in and set it to passthrough, or if we have >> to use the P800's firmware to set up

On 10/07/15 11:13, m.roth at 5-cent.us wrote: > Jack Bailey wrote: > >>> controller that expects to talk to individual SAS or SATA drives. you >>> can manage it with hpssacli from centos. >> I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS >> 7.0, but is broken on 7.1 -- it cannot find the controller. > Can it do RAID 6? > This page

I'm obviously biased but I like Tripp Lite stuff. I try to pitch in and help with Network UPS Tools issues related to Tripp Lite when I can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct?

Greetings: HP has drivers for the this controler but how do you get the drivers working for the install on Centos 4.0 ? Integrated Dual Channel Ultra ATA 100 IDE Adapter (ATA Models) I extracted the files from this RPM and placed on a CD. hpacucli-7.21-17.linux.rpm boot with the driver disk option and it does not find drivers. I'm I on the right track? Thanks -Jay

The hpacucli works... but what isn't clear to me, even with googling, is whether I have to do something from the utility, or whether I can just pull the failed drive out of the hot-swap bay and put another in. I *do* see that I have to re-enable the drive, or rescan it, but right now, I'm concerned about just pulling the dead one out. mark

Hi Denny. Nice, i have entered the HP R5500 XR to the drivers.list in the Testing and Development tree. Some info for you when you setup the nut. The shutdown_delay of the driver is internal to the ups. It calculate the time it can run after low-battery with the load. So when it comes to OB LB it starts the shutdown_delay and power off after it runs out. This is the normal way, as you would

I'm trying to use a rackmount Smart-UPS from APC with the USB connector, and I'm running into some issues. They seem to stem from the fact that the Report Descriptor is much larger than any other UPS I've seen (61939 bytes). Here is the quick fix that I put in libusb.c after getting the HID descriptor, and before getting the Report descriptor, which seems to work okay:

Re: "Does it work well with NUT?" Assuming it is the SU5000RT4UHV, the similar units I've tried seemed to work fine. For reference, the SU5000RT4UHV should be a 4004 USB protocol. ________________________________ From: David Zomaya Sent: Wednesday, March 25, 2020 5:21 PM To: Lee Damon; nut-upsuser Mailing List Subject: Re: [EXTERNAL] [Nut-upsuser] thoughts on tripp lite Smart

Hi list, who can say does FreeBSD 8.x/9.x support HP Smart Array B120i controller? Thanks, Serguey.

Hello, I'm trying to boot a HP Proliant DL320 G5 with a HP Smart Array E200i RAID card (latest BIOS and latest RAID card firmware). With menu.c32 or vesamenu.c32 from syslinux 3.50 the system hangs Booting from local disk... PXE-M0F Exiting With the latest dev version (3.52-pre) it hangs with : vesamenu.c32: attempted DOS system call The issue has already been reported but

Hello, I'm trying to install CentOS 6.0 64bit on a HP ProLiant ML110 G7 with a HP Smart Array B110i SATA RAID Controller. One logical drive (RAID 1+0) on the RAID Controller is already build. CentOS Installation can't find the logical Drive, but it shows me the zwo physical drives (sda+sdb). After searching the web, I found following hints:

Hi I am trying to install CentOS 5.6 on HP DL 180 G6 which has HP Smart Array B110i SATA RAID Controller Driver. I have 4 * 500 GB SATA HDD and configured RAID 1+0 using System BIOS, the BIOS detects usable disk space as 940GB disk space, when i start installing the OS, it does not detect HP Smart Array B110i SATA RAID Controller Driver As per

Jack Bailey wrote: > On 10/07/15 10:06, John R Pierce wrote: >> On 10/7/2015 8:42 AM, m.roth at 5-cent.us wrote: >>> Got an old HP box with a P800 Smart Array controller. The HP RAID box >>> plugged into it's failing, and we got a new JetStor. Anyone know if we >>> can just plug the JetStor in and set it to passthrough, or if we have >>> to use the

On 10/7/2015 11:47 AM, Jack Bailey wrote: > On 10/07/15 11:13, m.roth at 5-cent.us wrote: >> Jack Bailey wrote: >> >>>> controller that expects to talk to individual SAS or SATA drives. you >>>> can manage it with hpssacli from centos. >>> I have the P822. It has no JBOD or RAID 0. hpacucli works with CentOS >>> 7.0, but is broken on 7.1

We're looking at replacing some old APC SmartUPS 5000s with something that has USB so NUT can more easily talk with it (and yes, I've tried USB-RS232 adapters and every one I tried started kicking out errors within a few hours). One of the bids we have is for a "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V" as the potential replacement unit. I have no

Hi, I recently took delivery of a bunch of HP BL25p blades to add to my collection. I am attempting to install Centos4 x86_64 using PXE - the initial PXE DHCP stuff works, and the kernel and initrd are downloaded, but the server then immediately clears the screen and displays: "1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted Array Controller Interrupt 14h BIOS Cannot