similar to: Installing Xen on Macbook Pro (11.2): 'can't find IRQ for PCI INT A' messages.

Hellow all, i need help to fix this bug: ACPI BIOS Bug: Error: A valid RSDP was not found (20120711/tbxfroot-219) Because of this first errors i get this after, and it causes don''t work USB ports and some PCI cards on the system: can''t find IRQ for PCI INT A; please try using pci=biosirq Kernel: 3.6.1-xen self compiled (work perfect without xen multiboot) Xen Version: 4.2

Hi, Am trying to build SMP kernel. Took kernel-2.6.18-194.src.rpm, extracted, rpmbuilded with SMP option. Successfully compile the new kernel and when using that kernel to boot up, following errors were shown up(highlighted in bold & red color): My kernel config file has ACPI and PCI configs enabled. Any pointers to what caused the problem are appreciated. ******************************

On Mon, Sep 7, 2020 at 10:58 PM Marc MERLIN <marc_nouveau at merlins.org> wrote: > > On Mon, Sep 07, 2020 at 09:14:03PM +0200, Karol Herbst wrote: > > > - changes in the nouveau driver. Mika told me the PCIe regression > > > "pcieport 0000:00:01.0: PME: Spurious native interrupt!" is supposed > > > to be fixed in 5.8, but I still get a 4mn hang

On Mon, Sep 07, 2020 at 09:14:03PM +0200, Karol Herbst wrote: > > - changes in the nouveau driver. Mika told me the PCIe regression > > "pcieport 0000:00:01.0: PME: Spurious native interrupt!" is supposed > > to be fixed in 5.8, but I still get a 4mn hang or so during boot and > > with 5.8, removing the USB key, didn't help make the boot faster >

Hi Nouveau Devs, I have Nvidia 940MX graphics card on an i7 laptop. I am observing below errors when i start Fedora and view the logs, but didnt take them seriously. (my bad) I am facing random crashes with i play certain (not all) games in (dual boot) windows 10, and maybe there is a connection with the error emitted by nouveau driver. Any help in understanding the meaning of logs and how to fix

On Sun, Sep 6, 2020 at 8:52 PM Marc MERLIN <marc_nouveau at merlins.org> wrote: > > Ok, I have an update to this problem. I added the nouveau list because > I can't quite tell if the issue is: > - the PCIe changes that went in 5.6 I think (or 5.5?), referenced below > > - a new issue with thunderbold on thinkpad P73, that seems to be > triggered if I have a USB-C

Ok, I have an update to this problem. I added the nouveau list because I can't quite tell if the issue is: - the PCIe changes that went in 5.6 I think (or 5.5?), referenced below - a new issue with thunderbold on thinkpad P73, that seems to be triggered if I have a USB-C yubikey in the port. With 5.7, my issues went away if I removed the USB key during boot, showing an interaction

Hi gurus, I used xen 4.1.0 (64bit) + dom0 kernel 2.6.32.39 (32bit) + domu kernel 2.6.32.39 (32bit) environment. I was trying to passthru Broadcom NIC to domu. The NIC can be UP but not RUNNING, on domu #ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:10:18:95:25:90 inet addr:10.0.0.3 Bcast:10.0.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1

Sorry to duplicate my issues onto the list - I thought I had looked through this thread before and seen a different error, but apparently Adam and I are running into much the same thing. I'm seeing exactly the same "Failed to assign device to IOMMU" along with the "Device not owned by PCI Back End or pci-stub" in these scenarios. I have not gone back to previous versions,

On Fri, May 29, 2020 at 2:35 PM Marc MERLIN <marc_nouveau at merlins.org> wrote: > > Howdy, > > So, I have a Thinkpad P70 with hybrid graphics. > 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M600M] (rev a2) > that one works fine, I can use i915 for the main screen, and nouveau to > display on the external ports (external ports are only wired to

On Tue, Sep 17, 2019 at 9:11 AM Miroslav Geisselreiter <mg at intar.cz> wrote: > > Dne 17.9.2019 v 14:02 Mauricio Tavares napsal(a): > > On Tue, Sep 17, 2019 at 7:06 AM Miroslav Geisselreiter <mg at intar.cz> wrote: > >> I have brand new PC with this components: > >> CPU Intel? Pentium G5400, LGA1151 > >> motherboard ASUS PRIME B360M-C >

Howdy, So, I have a Thinkpad P70 with hybrid graphics. 01:00.0 VGA compatible controller: NVIDIA Corporation GM107GLM [Quadro M600M] (rev a2) that one works fine, I can use i915 for the main screen, and nouveau to display on the external ports (external ports are only wired to nvidia chip, so it's impossible to use them without turning the nvidia chip on). I now got a newer P73 also with the

Kevin Stange, It can be either kernel or update the NIC driver or firmware of the NIC card. Hope that helps! Xlord -----Original Message----- From: CentOS-virt [mailto:centos-virt-bounces at centos.org] On Behalf Of Kevin Stange Sent: Tuesday, January 24, 2017 1:04 AM To: centos-virt at centos.org Subject: [CentOS-virt] NIC Stability Problems Under Xen 4.4 / CentOS 6 / Linux 3.18 I have three

On 01/23/2017 11:04 AM, Kevin Stange wrote: > I have three different types of CentOS 6 Xen 4.4 based hypervisors (by > hardware) that are experiencing stability issues which I haven't been > able to track down. All three types seem to be having issues with NIC > and/or PCIe. In most cases, the issues are unrecoverable and require a > hard boot to resolve. All have Intel NICs.

I have begun to see these messages in my morning reports: WARNING: Kernel Errors Present pciehp 0000:00:1c.0:pcie04: Link Training Error occurs ...: 146 Time(s) pciehp 0ng Error occurs ...: 1 Time(s) pcieport 0000:00:1c.0: bridge window [mem 0xd0a000000.0 failed with error -22 ...: 1 Time(s) r8168: probe of 0000:01:00.0 failed with error -22 ...: 702 Time(s) r8168:

On Tue, May 31, 2016 at 11:43:56AM +0300, Mika Westerberg wrote: > On Mon, May 30, 2016 at 06:13:51PM +0200, Peter Wu wrote: > > Do you have any suggestions for the case where the pcieport driver > > refuses to put the bridge in D3 (because the BIOS is too old)? In that > > case the nouveau driver needs to fallback to the DSM method (but not > > when runtime PM is

Dne 17.9.2019 v 14:02 Mauricio Tavares napsal(a): > On Tue, Sep 17, 2019 at 7:06 AM Miroslav Geisselreiter <mg at intar.cz> wrote: >> I have brand new PC with this components: >> CPU Intel? Pentium G5400, LGA1151 >> motherboard ASUS PRIME B360M-C >> 16 GB RAM >> HDD 2x ADATA SSD 256GB XPG GAMMIX S11, PCIe Gen3x4 M.2 2280 (RAID1) >> NIC Intel X550-T1

Hello, I have an issue with my XEN system. I suspect that it might be a bug, but I''m no linux expert, so I don''t know. Here is my problem: I have an ASUS P7P55D-E Premium motherboard, and a Western Digital Caviar Black SATA-III 1TB hdd. I am trying to use AHCI. The dom0 is an Arch Linux. The dom0 boots fine until Intel VT-d is enabled in the BIOS. When I enable it Arch

On 02/21/2017 11:47 AM, Johnny Hughes wrote: > On 01/23/2017 11:04 AM, Kevin Stange wrote: >> I have three different types of CentOS 6 Xen 4.4 based hypervisors (by >> hardware) that are experiencing stability issues which I haven't been >> able to track down. All three types seem to be having issues with NIC >> and/or PCIe. In most cases, the issues are

On Sun, May 29, 2016 at 05:50:06PM +0200, Lukas Wunner wrote: > Hi Peter, > > On Fri, May 27, 2016 at 03:07:33AM +0200, Peter Wu wrote: > > On Tue, May 24, 2016 at 06:03:27PM +0200, Lukas Wunner wrote: > > > nouveau_drm_load() calls pm_runtime_put() if nouveau_runtime_pm != 0, > > > but nouveau_drm_unload() calls pm_runtime_get_sync() unconditionally. > >