Displaying 20 results from an estimated 600 matches similar to: "[ler@lerctr.org: 10-BETA3: Bad negotiation on AHD controller]"
2008 May 27
1
SCSI bus reset with Adaptec 29320ALP and Eonstor RAID
Hello,
I am trying to use a 1.5TB Eonstor raid array with FreeBSD 7.0, but I
don't understand whether it is the raid or the scsi card or something
else that is causing the computer problems when accessing the raid. My
problem is that soon after recognizing the attached disk during boot,
FreeBSD appears to hang for about 10 seconds and then says
ahd0: Recovery Initiated - Card
2012 Oct 08
2
time keeps on slipping... slipping...
I recently put together a new machine w/ a SuperMicro H8SCM and an
AMD Opteron 4228 HE... I've having an issue where the clock on the
machine skips around... The wierd part is that it's very sudden when
it happens... ntp sometimes brings it back, but it can't when the clock
gets too far ahread (1000 seconds), ntp dies...
In order to catch it happening, I ran a sleep 60 loop
2013 Mar 05
2
make_dev_physpath_alias
Hello all.
I have a supermicro 16 bay box with a LSI 9211-8i card.
We use it for temp data storage, and we wanted to try the l4z compression.
After updating the source tree to r247839: and doing a make buildworld
cycle all works fine.
But at boot time we get some warnings.
make_dev_physpath_alias: WARNING - Unable to alias
gptid/281951f4-a996-11e1-83eb-00259061b51a to
enc at
2013 Mar 25
2
gptzfsboot: error 4 lba 30
Hi.
On one of my fresh installed servers I am seeing the following output during boot:
gptzfsboot: error 4 lba 30
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 30
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot: error 4 lba 31
gptzfsboot:
2008 Nov 30
1
panic: spin lock held too long on 7.1-PRERELEASE (sio)
Hi,
I currently encounter
spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long
panic: spin lock held too long
cpuid=3
on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM.
System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC.
This happens with VSCom Card that was previously in use in a
5.3-STABLE system (also hp server, but older hardware) without
problems. The
2008 Aug 01
1
reboot sometimes freezes, adaptic scsi card possible problem
On reboot, one out of 10 times, reboot (from hardware initialization) stops.
Referring to this portion of the dmesg -v output, of a successful boot,
where i have marked ">>>HERE<<<" is where the boot freezes on an
unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3
unchanged.
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire
acd0: setting
2013 Nov 03
1
FreeBSD 10 Beta 2: make installkernel failure with installer provided ZFS configuration.
Hi,
I was trying to rebuild world on a FreeBSD 10 test system, that I had just
installed. ZFS root was setup. I let the installation program do all the
ZFS setup and configuration. I put root on a 5 disk encrypted raidz array.
Besides the installer configuring 5 times the amount of swap space I asked
for (asked for 8gb, installer put 8gb on each drive, for 40gb in total.)
everything was working
2003 Apr 07
1
kmem_malloc crash with 4.8
Hi. I've recently borrowed a SuperMicro 6013P-8 from a vendor
for the purposes of testing it to see if FreeBSD and these machines will
make a good replacements for our current flock of 11 Netra T1s running
solaris. Things are going very well with the tests, with the glaring
exception of the following crash:
While doing some significant disk operations: du, deleting a different
part of the
2012 Oct 02
1
ahcich reset -> cannot mount zfs root in 9.1-PRE
Hi all,
Trying to upgrade a system from 9.0-RELEASE to 9.1-PRE from yesterday on
my machine (GEOM+ZFS mirror setup on ada[01]p3), the new kernel becomes
unable to mount root... The only way to recover is to boot from 9.0 kernel.
The disks were already named ada[01] in 9.0, so I suspect nothing there...
I tried
- disabling AHCI in bios (no change seen)
- change cables, check PSU, test disks
2003 Jun 26
2
Is there something sppecial about pass4 ?
Machine is 4.8-STABLE
smaug# camcontrol devlist
<COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0)
<COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1)
<COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2)
<COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3)
<IBM IC35L018UCPR15-0 S70H>
2003 Dec 18
0
Partial deadlock in 4.9p1
I've just had a 4.9p1 system partially deadlock for about 30 minutes
and then spontaneously(?) recover. The "ps" results point at vinum.
I've never seen this before and don't recall anything like this being
mentioned here before.
At the time, I had two find's running in a large NFS mounted
filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports"
from
2003 Jun 23
1
STABLE regression with AIC-7902 controller.
I have a Supermicro SuperServer 6013P-8 system which features a X5DPR-8G2
motherboard with embedded Adaptec AIC-7902 dual-Ultra320 SCSI controller.
Said system boots and runs fine with 4.8-RELEASE (with a slight cosmetic
problem during boot that can be cured by building a kernel without eisa
support). With STABLE (as of 19 June) the system locks up hard (no
response to the keboard) during the
2006 Mar 11
4
Problem with 16-in-1 card reader
My new PC has an internal 16-in-1 card reader connected via USB 2.0. The
device is the Techsolo TCR-1640
(http://www.techsolo.de/product/cardreader/tcr_1640/index.php).
I boot from a compact flash inserted in it and I can mount and unmount
the same CF once the system has booted and has mounted the root
partition from my graid3 array.
The problem arise when I replace the inserted CF with another
2015 Sep 24
0
FreeBSD 10 & default_vsz_limit causing reboots?
Update.? Only a single reboot has occurred since changing
defalt_vsz_limit from 384M to 512M.? It would seem that something the
users are doing is causing that virtual memory size to be exceeded
(possibly a mailbox search?), and when that occurs Dovecot/FreeBSD is not
handling the event as smoothly as expected.
Here's my dmesg for more basic info.
Sep 17 11:25:39 romulus syslogd: kernel boot
2007 Dec 27
2
Failure of gvinum after panic
Hi all,
I have some problems with my gvinum setup after the system panic'ed.
Afterwards the system fails finding the plexes to the subdisks (or at
least that is what I can understand after having searched the gvinum
source code for the error string in the DMESG log..)
The machine is an IBM Netfinity 5000 and the internal HW self tests
does not find any errors in the hw.
Luckily my root is
2003 May 13
1
4.8-RELEASE not identifying scsi drives
A problem with 4.8 reported by myself and Aaron D. Gifford.
Anyone in -stable who knows more?
********
I'm assembling a Compaq 1850R with attached storage system. For the
built in scsi controller (sym), there are three drives internally on
channel 1 + 5 drives externally on channel 2.
During boot, I can see all disks being identified first by the machine
itself and then in the early part
2003 Aug 09
0
USB problems (I/O-Error => USB da(4) quirks, uscanner0)
Hi,
I have some problems with usb da and uscanner giving me I/O-errors.
This is on a ASRock K7VT2 board.
If there is anything else I could do (testing patches, providing further info),
please let me know.
4.8-STABLE from 04.08.2003:
- MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error
- Epson Perfection 1260 Scanner scanimage --test => Error during device I/O
2013 May 22
0
em2: watchdog timeout -- resetting
Hello, I have a server pfsense in bridge mode to function as transparent
FW, the problem is that once I connect the pfsense between my router core
and my core switch catalyst a few seconds begin to appear several messages
like these:
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
em2: watchdog timeout - resetting
And the connection falls
2013 Jul 30
2
nut package with Riello UPS support
another attempt:
# upsd
Network UPS Tools upsd 2.6.5
fopen /var/db/nut/upsd.pid: No such file or directory
listening on 127.0.0.1 port 3493
listening on ::1 port 3493
Can't connect to UPS [senpro] (riello_ser-senpro): No such file or directory
# ls -la
/var/db/nut/
total 12
drwx------ 2 _ups wheel 512 Jul 30 10:22 .
drwxr-xr-x 10 root wheel 512 Jul 29 16:41 ..
-rw-r--r-- 1 _ups
2013 Jul 30
0
Fwd: nut package with Riello UPS support
Here is what I did:
# cd /root/nut/ # nut here it's checkouted
repository
# ./configure --with-user=_ups --with-group=_ups
# cd drivers/
# make riello_ser
# chgrp bin riello_ser
# cp riello_ser /usr/local/bin # here I copied builder driver to folder
where nut-package will store their files/drivers
# pkg_add nut-2.6.5p1
# ls -la /dev/tty00
crw-rw---- 1 _ups _ups 8, 0 Jul 30