similar to: Intel G965 chipset + ICH8

Hello everyone ! I will buy a new PC for CentOS 5.0. I install Linux on PC for the first time. I do not have the skill of it. Here are my candidates of mabo : Intel DG965WH Intel DG965YCK Intel DG965WHMKR ASUS P5B-V All mabos have Intel G965 chipset + ICH8 Did anyone succeed to install CentOS 5.0 on these mabos, and to set up network configuration ? Could you give me any information about

I just migrated my working Fedora Core 8 desktop to CentOS 5.1 and went from my nice 1680x1050 resolution to 1280x1024. I have made all the possible xorg.conf changes I found on the net to no avail. I tried system-config-display ?reconfig and it allows me to pick the resolution but reverts back to 1280x1024 in X? Anyone know what might need to be done in CentOS for this to work? The skewed aspect

Can someone make a recommedation as far as best chipset for Centos 5.0 or 5..1 using a Q6600 series CPU?with chipsets that have onboard VGA?? From poking around it looks like the G33 and P35 are not supported or have problems until the newer 2.6.22 kernel (the?iso's appear to be earlier than that, think it was?.18)?? So I am considering boards with the Intel G965 chipset but not sure if is

I have a Gigabyte nVidia GeForce 7300GS on an Intel DG965WHMKR mobo attached to an LG Flatron LG204WT widescreen monitor. I'm driving the monitor at 1680*1050, and the picture is compressed into the right-hand two-thirds of the screen. The monitor is OK as it's attached via a KVM switch to another machine - also with an nVidia card - and it displays perfectly on that. It looks like some

Add vscsiif.h Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> Signed-off-by: Jun Kamada <kama@jp.fujitsu.com> Signed-off-by: Akira Hayakawa <hayakawa.akira@jp.fujitsu.com> ----- Jun Kamada _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Hello, I use the following in my ups.conf: # USB: [apc] driver = usbhid-ups port = auto desc = "APC 1500VA" pollfreq = 5 On my new motherboard (an Intel DP55KG), every once and awhile I get this: Broadcast Message from nut at box.com (somewhere) at 17:48 ... Communications with UPS apc at localhost lost Broadcast Message from nut at box.com

Hi all. We developped a pv-scsi driver that we refered Fujita-san''s scsi-driver and blkback. (see, http://www.xensource.com/files/xensummit_4/Xen_Summit_8_Matsumoto.pdf) The pv-scsi driver''s feature is as follow: * Guest has dedicated SCSI-HBAs of Dom0. * Guest can send scsi_cdb to the HBAs. * Guest recognises the HBAs from hostno of xenstore. Currentlly, We are

Tested with a Dell Vostro 1320 laptop. After booting with 'MENU RESOLUTION 1280 800' in config file, this is the ouput of 'hwinfo --framebuffer': 02: None 00.0: 11001 VESA Framebuffer [Created at bios.459] Unique ID: rdCR.fRULN9k9OD4 Hardware Class: framebuffer Model: "Intel(r)Cantiga Graphics Controller" Vendor: "Intel Corporation" Device:

Hi xen-users, I install xen, on gentoo linux. Install was ok, but i have an issue that i can''t solve. When booting in xen-linux, whereis no eth0 interface. When i boot non-xen kernel all is ok, eth0 is present. I use 2.6.18-xen kernel version. lspci show me: 00:00.0 Host bridge: Intel Corporation 82P965/G965 Memory Controller Hub (rev 02) 00:01.0 PCI bridge: Intel Corporation

This patch is for modifying xend in order to use pvscsi driver. (attach/detach HBA, etc.) Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> Signed-off-by: Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com> Signed-off-by: Jun Kamada <kama@jp.fujitsu.com> Signed-off-by: Akira Hayakawa <hayakawa.akira@jp.fujitsu.com> ----- Jun Kamada

Patch in order to make pvSCSI work on HVM. Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> Signed-off-by: Jun Kamada <kama@jp.fujitsu.com> Signed-off-by: Akira Hayakawa <hayakawa.akira@jp.fujitsu.com> ----- Jun Kamada _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

This patch is for backend driver. Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> Signed-off-by: Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com> Signed-off-by: Jun Kamada <kama@jp.fujitsu.com> Signed-off-by: Akira Hayakawa <hayakawa.akira@jp.fujitsu.com> ----- Jun Kamada _______________________________________________ Xen-devel mailing list

This patch is for Makefile and Kconfig file for scsifront and scsiback driver. Signed-off-by: Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> Signed-off-by: Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com> Signed-off-by: Jun Kamada <kama@jp.fujitsu.com> Signed-off-by: Akira Hayakawa <hayakawa.akira@jp.fujitsu.com> ----- Jun Kamada

Hello, Problem: When I migrated from a DG965WH -> DP55KG motherboard, there were quite a bit of issues, host still does not reboot without special flags, e.g. reboot=a, the NIC driver is broken with the in-kernel version (the one on e1000.sourceforge) fixes that and finally my UPS USB has driver stale problems, with two issues already relating to the HW/drivers themselves it would not be

The shorewall work with l7-filter? _____________________________________________________ Keny Hayakawa Schmeling Diretor Comercial/Administravivo Tel: 5566-1465 Fax: 5566-6541 http://www.optinfo.com.br kenyhs@optinfo.com.br _/_/_/ _/_/_/ _/_/_/ _/ _/ _/ _/_/_/ _/_/_/ _/ _/ _/ _/ _/ _/ _/_/ _/ _/ _/ _/ _/ _/

Edit file vi /etc/init.d/klogd In line KLOGD="" Change to KLOGD="-c 5" And restart klogd /etc/init.d/klogd restart _____________________________________________________ Keny Hayakawa Schmeling Diretor Comercial/Administravivo Tel: 5566-1465 Fax: 5566-6541 http://www.optinfo.com.br kenyhs@optinfo.com.br