similar to: TE420, is it possible do disable span (red blinking)?

I have just built a new system using an HP DL360G7 with a TE420 T1 card, and this is the first system using a generation 7 server. I'm not sure whether that is an issue or not. I am using Asterisk 1.2, and Zaptel 1.4.12.1 with patches for GEN5 of the TE420 card. I have successfully used this combination on several systems based on the DL360G6 and TE420(gen5), which have been in production for

Hello, I'm having problem connecting my Asterisk 1.4.29.1 with Digium TE420 to providers Cisco 2800 with VWIC-1MFT-E1 card. the same card runs fine with another E1 provider. TE420 led's lite green. Message type: RELEASE COMPLETE (90) < [08 02 80 ac] < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) < Ext: 1 Cause:

I have the following software installed in a Centos Box with a TE420 (5th Gen) card. . Centos 6.5 64-bit . Asterisk 1.4.22 . dahdi-linux-complete-2.9.1.1+2.9.1 . libpri-1.4.14. Even without plugging in the ISDN into span 1, all 4 spans are flashing red. Plugging an E1 into span 1 makes no difference. My system.conf is just simply: loadzone=au defaultzone=au span=1,1,0,ccs,hdb3,crc4 bchan=1-15

Hi I'm having problems getting the TE420 working in HP DL380G5 servers. The cards don't seem to be detected 100% by the BIOS. With two cards in the server they are never detected. things I've tried: 1 Update firmware to latest (P56) for the server 2 change irq settings 3 disable all onboard devices on server and remove raid controller 4 different cards in different slots What I

Hello everyone. I have a timing slips errors and I can't understand what source of the problem is. My installation has 2 digium cards: TE420 and TE220 cards in one server. There are 3 spans (E1) to PSTN and 3 spans to internal PBS stations - normal installation for transit communication. Span configuration is: span=1,1,0,ccs,hdb3 #TE420 - first port. To PSTN. span=2,0,0,ccs,hdb3 #TE420 -

Dear members of the list, I have difficulties to obtain sync with a Digium TE420 PCI Express For four entries E1, In my case I am with only 3 E1s available to configure. The telephony operator is BrasilTelecom and Signaling is R2 Digital. The information I have is that are E1s with 32 channels, not have sure. My settings Have been based on the link reference:

<rant level="mild"> I tried emailing support and got a rejection notice saying to go via the website, which then wants registered product details before it will let me enter a support request. Unfortunately, the card was bought by my customer, not by me :-( So I'll just have to ask here... </rant> I am currently trying to replicate an existing system build using new

Hi All I am getting a strange prblem while installing TE420 on a Dell Poweredge T100 machine. I get a "TE4XXX: version Synchronisation error " nad the machine hangs which needs a hard reboot . Its a new machine and if i install TE410P then installation is successful. Strangely enough i have a working TE420F on another Dell POweredge T100 machine at a different locaiton ... The DELL tech

Asterisk 1.4.32 dahdi-2.3.0.1 Centos 5.5 Digium TE420 CAC channel bank (2) Cisco RVS4000 router Cox 50 Mbps/ 5 Mbps cable modem Flowroute provider codac G-711 90 % CPU idle callwaiting=no When there are 10-15 or more calls up the farend hears a callwaiting like beep every 3 to 6 sec. the duration of this "beep" is very short and would be no problem if it didn?t happen every few

Hi All I'm having some serious kernel panic while using digium cards. It may be related to IRQ shared. Can this cause a lot of drop call and bad voice quality ? Do you guys know if there is a way I can assign one IRQ for each digium card ? Thanks a lot. Here is the output of /var/log/syslog kernel: [ 3821.982893] Uhhuh. NMI received for unknown reason 20. kernel: [

So historically I've done one of two things on systems where I've needed to use MeetMe * used a real Digium card, and I've only ever used a TE400 or a TE420 for that purpose, and I know they have the timing chip * used dahdi_dummy, which works well with light load, but I had it running on a very overloaded server and had audio quality issues. I may have had quality issues even with a

Hi, I'm having some questions related to echo cancellation configuration on a Digium board enabled systems (B410P, TE420, TE420B, ....) for cases when a hardware ech canceller is present or not. I read in TEXXX manual that when setting echocancel=yes in chan_dahdi.conf on a VPMOCT64-equiped system, 128ms hardware echo cancellation was enabled. 1. I'm correct thinking that it is then

Hello List, our setup: Callcenter IBM Hardware, 1x TE420, 1x xircom analog switch, 4x different cellular providers on the xircom analog port, ~60 agents Debian 5.0.1 (Lenny) Asterisk 1.4.21.2 Debian Package recompiled with additional app_queue segfault fix Zaptel 1.4.11 Debian Package My Problem is I have two channels (Zap/9-1 and Zap/6-1) which have a duration of over 4 hours. I am

Hello! I want to create BDC with smbpasswd backend, just because I run ldap master on the same machine as PDC and I don't think that using ldap backend will be far better for me. Only thing I don't understand: I read in howto: <quote> Machine Accounts Keep Expiring This problem will occur when the passdb (SAM) files are copied from a central server but the local Backup

Hi All, I am facing problem with E1 line. I have installed Asterisk (1.4.20.1) on a system with Digium TE420 card (Zaptel- 1.4.10) But every now and then I face problem of down E1's. The log show lot of entries like "pri_dchannel: PRI got event: HDLC Bad FCS (8) on Primary D-channel of span 2" This happens on a regular basis and the E1 becomes up after some time. My

Hello list, (Resending this email due to a typo in previous copy) I need to do E1 to T1 conversion for a project, and was wondering if there exists a card with both E1 and T1 on it. Or is it possible to use two separate cards in an asterisk box, one for E1 and one for T1? (Please don't mention aculab or adtran, dealt with them in the past, won't deal again.) I talked to Digium and the

We have a couple of servers with asterisk 1.4.19 and zaptel 1.4.10, acting as gateways from SIP to ISDN PRI interfaces. Each has one Digium TE420 (with hardware echo cancellation) and one TC400B for transcoding, in order to handle 60/90 contemporary calls in peak hours. In my logs there are hundreds of thousand warnigs per day like these: transcode.c: no samples for lintoulaw transcode.c:

Hi, Does anybody have any feedback on this new card from Digium? It was announced a couple of weeks ago but now Digium said they ran out and is no longer available for purchase via their web site. I find this kind off odd. If they are out why don't they just says its on backorder or something, rather than pulling it off completely from the store. I am kind of hesistant at this point

05.03.2015 11:42, Dmitry Melekhov ?????: > 05.03.2015 11:29, Dmitry Melekhov ?????: >> Hello! >> >> Just installed asterisk 13.2.0 and see many such messages in log, I >> see them in console during calls, really something like this: >> >> >> -- Executing [6166 at kanbaikal:2] Dial("OOH323/kanbaikal-6", >> "SIP/6166 at

Hello! As I see there is dsp_drop_silence switch in confbridge. Could you tell me how asterisk detects silence? Is it possible to change silence level, so, let's say some not loud enough background noises will be recognized as silence and only loud enough human voice will be recognized as sound? Thank you!