Displaying 20 results from an estimated 7000 matches similar to: "dahdi fax catch-22"
2010 Apr 09
3
Problems with Fax over TDM410P
Hello my friends...
We are having some problems with the fax in our asterisk server...
We have:
Asterisk 1.4.21.2
Zaptel Version: 1.4.11
libpri version: 1.4.5
Digium Card TDM 410P
This digium card has 3 FXO ports and 1 FXS port where we have a fax machine
connected!
The problem is that we can receive fax very good, but we can't make any
outbound fax call, in fact, our asterisk get freezed
2011 Mar 18
2
Problem routing call to fax machine on DAHDI FXS port
I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS
modules. I'm trying to set-up things to route analog fax calls from a
FXO port to an analog fax machine on a FXS port on the same card.
Outgoing faxes work just fine. But incoming faces are routed to the
right DAHDI extension, but the call dropped right as the fax machine
rings for the first time. The fax machine
2011 Jan 03
1
Clarification on DAHDI Fax Detection
Hi folks,
I was hoping that someone might be able to help clarify some confusion I
have on DAHDI Fax detection after spending some time searching. My
understanding is this:
1.) Echo cancellation is automatically disabled upon recognition of a
CNG tone, regardless of the faxdetect setting. This can only be disabled
at compile time.
2.) faxdetect=incoming will, upon detection of a CNG tone,
2010 Apr 16
2
How to set up Fax on Asterisk - Using analog Fax machines and HT502 (or FXS of a Digium TDM410P)
Hello Asterisk users,
We are having MANY but MANY problems configuring an analog fax machine to
work properly on Asterisk, the first thing we do was to plug in the Fax
analog machine to the FXS port of the Digium TDM410P, we set echocancel=no
on zapata.conf and also faxdetect=yes on general section, but our Asterisk
CRASH every time we try to send/receive fax!
We are using Asterisk 1.4.21 and
2009 Feb 25
2
dahdi wcb4xxp and fax
Hi all,
I wanted to switch from my current setup (mISDN) to the native dahdi with
b410p support (wcb4xp). All works fine for normal phone calls but not for
faxing. Faxes are distorted, if arriving at all, and hylafax logs the usual
bad stuff (HDLC frame not byte-oriented.)
Our setup uses a digium b410p card with asterisk 1.6, latest libpri and
dahdi, hylafax with iaxmodem, and all this on 1
2004 Jun 18
2
Fax with SPA-2000's?
I've been trying to get fax reception to work using an SPA-2000 to ring
the fax machine or modem that's taking fax calls. I was curious if
anyone else had tried something similar, and if so, had any luck
getting it to work reliably. I've been able to get it to work, but it
isn't reliable. (Pages/lines of black dots result more frequently than
not.) The incoming lines are FXO
2010 Aug 23
1
Dahdi install gone wrong
The card you installed has FXO or FXS modules in it ????? are you getting
your lines directly from the telco co???
Doug D
On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent:
* -----Original Message-----
* From: Todd Reese
* Reply-to: Asterisk Users Mailing List - Non-Commercial
Discussion
* To: asterisk-users at lists.digium.com [3]
* Subject: [asterisk-users] Dahdi
2011 Jan 06
1
Too Few Fax Detections
OK, after my last message about fax detection, I feel a bit better informed and able to press forward. I started looking into this because I was getting lots of false positive fax detection errors in the logs with faxdetect=both set in chan_dahdi.conf.
Anyhow, I do not currently use fax detection, and we have a dedicated Fax DID on our PRI, so setting faxdetect=no works fine. Having said that, I
2009 Jan 22
2
Incoming fax detection on mISDN hfcmulti B410P card
Hi,
I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti).
I'm running:
kernel 2.6.17
misdn 1.1.3
asterisk 1.4.21.2
B410P card
I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels).
I've used the following options in /etc/asterisk/misdn.conf:
2018 Dec 04
2
DAHDI fax detection
Asterisk 16 latest
DAHDI 3.0.0 latest
Excerpt from chan_dahdi.conf is shown below. I'm trying to enable fax
detection on inbound calls so that I can take appropriate action in the
dial plan. "dahdi show channel 1" shows "Fax Handled: no". Does that
mean that I don't have it configured correctly?
[channels]
; Span 1: WCTE2/0/1 "WCTE23X (PCI) Card 0 Span
2010 Feb 20
1
Fax, T38 and NAT
Gentlemen,
I have 3 faxes attached to an Asterisk. Fax - SPA2102 - Asterisk.
0851711201 and 0851711290 is on our WAN, no NAT.
0197673581 is outside our WAN and needs to be NAT'ed.
Sending a fax from 0851711201 to 0851711290, no problem, switches to T38
and fax goes through.
Sending a from 0197673581 to 0851711201, no problem as long as i dont
enable T38 on 0197673581.
But, if i enable T38
2010 Jan 19
0
Detecting incoming faxes and forwarding to phone fax machine
I'm having a problem receiving incoming faxes and I'm hoping someone
here can help me out.
My system is a PBX in a Flash with one dahdi card for my incoming analog
lines and another dahdi card for my analog devices (fax and modem).
My dahdi-channels.conf file looks like:
; Autogenerated by /usr/sbin/dahdi_genconf on Tue Jun 23 14:56:24 2009
; If you edit this file and execute
2015 Jun 06
1
does chan dahdi supports fax?
hello everyone,
i have question about fax detection on dahdi channels. does dahdi channels
detect fax and pass it? if yes, does it detects both types of fax (g711
pass through and T.38)? finally, how can i enable it on dahdi_channels? i
set faxdetect=both in chan_dahdi.conf but dahdi can not pass fax(i just
wanna pass fax not send or receive it).
any comments or hints are really appreciated.
SAM
2009 Nov 28
1
DAHDI/1-2 v. DAHDI/2-1 ??
I've got a single TDM 400P board with two internal ports and 1 external.
chan_dahdi.conf:
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks not auto Use FXO signalling for FXS
group=0
channel => 1 ; Telephone attached to port 1
channel => 2 ; Telephone attached to port 2
context=incoming-pstn-line ; Incoming calls
2009 Nov 30
1
DAHDI - BRI - Astribank
Hello List,
it is a very long time since I wrote here.... It has been still in
Zaptel times....
Today I am run into a related problem: I can't get a DAHDI setup to
work 100%. I am configuring an Astribank XR00013 (BRI, two ISDN ports).
At some degree the installation (latest DAHDI drivers, Asterisk
1.6.0.18 on Centos 5.x) works.
I can get incoming calls to the dialplan context that is
2006 Jun 19
5
faxdetect questions - Please HELP!
I'm using IAXmodem and Hylafax with 'faxdetect=incoming' and things mostly
work pretty well. My main lines come in via T1 DID. Today, HR got tired of
having someone read and forward their faxes to them and requested we bring
their physical machine back on line. I have been able to get the fax
forwarded to the appropriate zap channel, but I cannot seem to get it to
stop
2006 Dec 16
1
rxfax detection problems with multiple contexts
Hello,
I have a rather odd problem with Asterisk detecting faxes. I have two
POTS lines coming into the box (TDM400P). Line 1 is for voice, Line 2
is fof fax. When I set them up with channel => 1-2 in zapata.conf,
all is fine, but as soon as I have two channel => definitions,
Asterisk is unable to detect faxes. The fax line is not supposed to
ring local phones, so the most obvious
2010 Mar 17
3
asterisk fax handeling
Hello,
I was wondering if the following was possible:
When somebody sends a fax to my direct number 0101234567105 (my extension
will be 105) is it possible that Asterisk, or an addon sees this as a fax,
and e-mail the fax to me?
So everybody with a private extension will be able to receive faxes in his
e-mailbox on his direct number.
Any pointers would be highly appreciated!
Thanks,
Peter
2008 Sep 05
1
dahdi & tdm400p: no luck
As best i could figure it out, I've installed dahdi and rc4.
My TDM400P doesn't answer fxo or fxs.
/etc/dahdi/system.conf:
loadzone = us
defaultzone=us
fxoks=1,2
fxsks=4
/etc/asterisk/chan_dahdi.conf:
[house-phones]
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel
dahdichan => 1 ;
2005 Feb 06
4
Autodetecting faxes
I have managed to get spandsp working, and if I dial a specific
extension I can receive faxes. WhooHoo.
However, I was wanting to use the "fax detect" option in order to allow
individuals to receive faxes, but can't get that to work.
Given the following extensions (mainly copied from examples on the
wiki), why is the call simply passed onto the sip device rather than
being