similar to: parking - why doesn't this work?

I'm trying to implement call parking with asterisk and Cisco SPA504G phones: features.conf parkext => 700 parkpos => 701-702 context => parkedcalls I defined one of the unused keys to park the calls: Key2: fnc=sd;ext=700 at 10.0.1.103;vid=1;nme=Park I also defined two other keys to pickup/unpark the calls: Key3: fnc=blf+sd+cp;sub=701 at 10.0.1.103 Key4: fnc=blf+sd+cp;sub=702 at

I've lurked for a while, but I think this is one of my first "pleas" for help. I'm having issues where a parked call using the macro below is getting "stuck". Users park the call via a blfxfer key on an Aastra phone. If the call is a blind transfer, it tries to park the call. If it isn't a blind transfer, it tries to unpark the call. Only 2 extensions (2759 and

We are planning to have about 100+ parking lots defined in features.conf , each with about 4 unique park positions. Asterisk will be handling all the parking and unparking (we don't exclusively use Park/ParkedCall in the dialplan): [parkinglot_a] parkpos => 1-4 context=parked [parkinglot_b] parkpos => 5-8 context=parked As far as I can tell, Asterisk adds/removes extensions to the

My company for various reasons has asked that I come up with a way to have previously parked calls be re-parked in the same parking slot. I have looked at setting up asterisk so that the receptionist chooses which slot to place a call, but I think there is an easier way. That is when I came up with the idea of "Sticky Park". Here is how it would work. A call would come in and

Hi, Is there a way to do a blind transfer within an asterisk dialplan (like '##')? The reason I need this (I think) rather than a regular Goto() is that I'm trying to do one-touch parking. I can park a call using one-touch parking and then pick it up again, however if I try to re-park the call, it gets lost. I think that is because asterisk thinks I'm still on the park extension.

Hi, I'm unable to pick up parked calls after they are transfered. I get the "transfer" message when I press # and then I'm told "701" The extension I'm dialing goes to the on hold music. I'm disconnected, I hang up, dial "701" and I see this message on the console "Everyone is busy/congested at this time" I just have the default

Hello, all. I'm having a deeply frustrating time getting multiple parking lots to work and am wondering what I am doing wrong. I am using Asterisk 1.6.1.1. I defined two separate parking lots in features.conf as follows: [parkinglot_a100] ; SSI context => a100-parking parkpos => 900-920 findslot => next [parkinglot_a10] ; EBC context => a10-parking parkpos => 800-820

Hello, I am trying to create a dynamic call parking lot using https://wiki.asterisk.org/wiki/display/AST/Application_Park But this manual is not enough to fix my problem : Asterisk keeps trying to park the call in the default parking lot : [Jul 2 11:32:14] -- Executing [3333 at from-770000:5] Set("SIP/testacc77000-00000002", "PARKINGDYNAMIC=parkinglot_test") in new

Is it possible to park a call through the manager interface? If yes; how? Regards Thorben -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050318/ec2a5f90/attachment.htm

I have been trying to get the dynamic parking working. For some reason when I park a call using this method the console says it is using the default parking context not the one I am trying to specidfy. It also is playing the parked extension to the caller. I am transfering the call to an extension that is doing a goto to the context below. Any ideas or examples on how to make this work.

Hi! I build VMKit and run some programs successfully. But when using java.util.concurrent.locks.ReentrantLock and java.util.concurrent.locks.Condition, I catch a Throwable : java.lang.UnsatisfiedLinkError: sun.misc.Unsafe.unpark(Ljava/lang/Object;)V after using the function : void java.util.concurrent.locks.Condition.await() My test program is as follows: *import* *java.lang*.*;

Asterisk Version: 1.8.1.1 Problem: Multiple Parking Lots Issue: Not redirecting to the right parking lot. Always uses the first parking lot from "parkedcalls show" or "features show" Asterisk Working Version: 1.6.1 Steps Taken: In features.conf added: [parkinglot_test] context => parkedcalls-test parkext => 700 parkpos => 701-710 parkingtime => 120 findslot

I've been reading most of the day and can't seem to find a clear definition of the syntax for parking lot hints in AEL2. I have tried all of the following and they either do not light up the line button on my Snom 300 or give syntax errors: hint(park/701) 701 => { ParkedCall(701); } hint(park:701) 701 => { ParkedCall(701); } hint(park/701 at parkedcalls) 701 =>

One more Polycom IP601 question please (sorry for the long intro here to document) ... In order to closely approximate the behavior of the previous telephone system that many of the users are familiar with, I have set up call parking like this: - features.conf [general] section contains: parkext => ** ; What extension to dial to park parkpos => 10-11 ; What

Now on to another problem that we've had as far as I know since the beginning of using Asterisk 9+ months ago. I've been trying very hard to knock this problem out but regardless of what I do, it's still there. So, the problem is, when a call is in the parking lot, it then times out after whatever time frame and dials the extension that put it on hold. After 60 seconds of ringing

Hi, I'm having problem with call parking. When I park call, either via transfer to xten or park digit sequence from features.conf, I hear the parking lot number read to me and the user gets transferred. However, MOH stops for the caller the moment user is transferred. The user can be retrieved by dialing the parked extension and voice resumes. If the parked user hangs up, the channel state

Hi, I'm trying to debug crashing server, and I'm starting to suspect tftp server as one of possible culprits. The box is quad core Xeon with 4GB of memory serving as Asterisk PBX + some additional services (reporting, IS integration etc). Among others, it's also serving as provisioning box for over hundred of SPA504 phones. Phones are checking configuration files every 60s meaning

I would like to build into our application a button to "park" and a button to "unpark" calls. Consider this scenario: Agent A gets a call, and obtains a reference number. He needs to send this client to another Agent. Agent A pushes the "park" button. The call is then parked into a designated slot based on the reference number . Agent A then calls Agent B and

Hi all, If I have multiple extension contexts for different businesses sharing an * pbx, and I include => parkedcalls in each of these separate contexts, would someone at biz-1 be able to pick up a parked call that someone in biz-2 parked? I _don't_ want this to happen -- I'd like to be able to include a different "parkedcalls" context in each business' context, and

I`m having (a lot of) trouble changing the call parking timeout behavior. This is my SIP context [internal-local-only-hamel] exten => s,1,Hangup include => parkedcalls What I am trying to accomppish is a quick test where I park a call, wait 45 seconds, and it hangs up. Here is my execution in the CLI: == Parked SIP/0004f2134384-1-0943e8a0 on 101 at parkedcalls. Will