similar to: Upgrade 9.1 -> 9.2 Invalid format / BTX halted

I upgraded my 7.0 system to 7.1-RELEASE with freebsd-update only to find that it no longer boots correctly, instead crashing with a BTX backtrace. If I break to the loader prompt and use 'ls /boot', I also get a backtrace. A new install of 7.1 on this hardware using a separate SCSI card and drive array also leads to a BTX backtrace. I have copied this below as the first (most

latest pxeboot (7.1): mother-board NIC/LOM CPU ------------- ------- --- Intel SWV25 em xeon works fine SUN X2200 bge amd works fine DELL PE 2950 bce xeon failes 95% of the times hangs or goes into btx dump regs. mode :-) Intel SE7320VP21 msk xeon failes 50% of the times - hangs pxeboot with btx.S 1.45 2008/02/27 23:35:39, works fine. so it seems that changes since 1.45 have

Hi We are experiencing a problem with one of our FreBSD 6.2 machines. The machine has been running fine for months until we had to reboot it. Now it doesn't boot anymore. After the boot loader we get what looks like a register dump: FreeBSD/i386 boot Default: 0:ad(0,a)heap boot: /boot/kernel/kernel\ int=0000000e err=00000002 efl=00010086 eip=c042426a eax=c06da7a8 ebx=c06da7a0

The stack dump message is white text on black background. Right above the stack dump message, still in yellow-on-blue from the PXELINUX settings, is the text: Building the boot loader arguments Relocating the loader and the BTX Starting the BTX loader <change to white-on-black> BTX loader 1.00 BTX version is 1.01 <stack dump> Would that business of "arguments...

Hi, I try to full virtualize FreeBSD, and it does not boot. I made a VNC screenshot, attached, and also made a joint screenshot. I know about the bug, I am going to enforce (+1) that I also encounter the bug. Would you know any workaround? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

Hi again... The text under "BTX loader..." should appear as a block where each line is 56 characters long. "BTX halted" is on its own line. Apologies for my mailer... -Chris -----Original Message----- From: McMahon, Chris Sent: Wednesday, November 19, 2003 8:32 AM To: 'H. Peter Anvin'; McMahon, Chris Cc: 'syslinux at zytor.com'; 'mike at

I have created a function to do something: i <- factor(sample(c("A", "B", "C", NA), 793, rep=T, prob=c(8, 7, 5, 1))) k <- factor(sample(c("X", "Y", "Z", NA), 793, rep=T, prob=c(12, 7, 9, 1))) mytable <- function(x){ xtb <- x btx <- x # do more with x, not relevant here cat("The table has been created,

I have a new Polycom Spectralink 8002 and am having trouble with the configuration or the unit but I can't see what's wrong. The unit does not seem to even attempt to register with the Asterisk proxy but I can make calls to it. I have viewed the syslog from the device which it will actually write to the asterisk server so I know it can be reached. I have also run a sip debug and

Hi guys Can anyone give me any reason why BX should fail - tryig to install FreeBSD 4.7 on an old machine from CDROM. The machine loads a very old version of FreeBSD from hard drive (password long forgotten) so it seems to be running OK - it auto loads X windows - so the nachine seems to be running fine. Here is the output that I do not understand ;-( : int=00000000 err=00000000 efl=00030287

I was trying to load a FreeBSD 10 VM on my CentOS 6.4 machine, and it keeps hanging and not completing the boot. I have FBSD 9.x VM's running just fine, but if I try and load 10.x it's a no go. Attaching to the console using VNC, I see: gPXE (http://etherboot.org) - 00:04.0 C980 PCI2.10 PnP BBS PMM7FC0 at 20 C980 Booting from DVD/CD... CD Loader 1.2 Building the boot loader

Well, colleagues, I'm stuck a bit. I tried many different ways to setup system with vinum root (the only reference I found yet besides old "bootstrapping vinum" article is Joerg's commit message: http://freebsd.rambler.ru/bsdmail/cvs-all_2003/msg01225.html I failed. I have 4-stable system set up at ad0, and tried to set up pair of drives for new system at ad2 and ad3 (actually,

Hello... In the split-second before the reboot, I can see that the pxeboot.0 process is indeed started-- pxeboot gets out just over 2 lines of text before the reboot occurs. So it's not a "ready" message. The text in question is (without *'s): ****************************************** PXE Loader 1.00 Building the boot loader arguments Relocating the loader and the

Hello, I have a problem with loader. I recently upgraded from 6_rel to 7_rel. Now when I install world there is a problem booting. Here is what I do: cd /usr/src make buildworld make buildkernel KERNCONF=BLACK make installkernel KERNCONF=BLACK At this point I can reboot and all is good. After boot I install the new world: cd /usr/src mergemaster -p reboot into single user mode cd /usr/src make

Hello... With syslinux pre7, I am consistently getting what looks like a stack dump out of the FreeBSD loader. I have seen this behavior from pxeboot before. Maybe once out of every fifty or so runs of pxeboot, I would see an error message like the one below, but it was both rare and inconsistent. Now I am getting this message every time pxelinux invokes pxeboot: BTX loader 1.00 BTX

Folks -- I''m trying to run FreeBSD 6.0 on a VT-x based Xen system. I''m experiencing a problem where the boot loader is crashing before the FreeBSD kernel (proper) is loaded. The sequence of operations is that the VMX domain is constructed, the BIOS is executed, GRUB loads, I type the instructions to load FreeBSD (a boot loader) and that code begins to execute and then

Hi! I'm quite new to the list, but searching the archive and PRs didn't show me anything on the matter. According to FreeBSD Handbook (14.8.2 Setting up a Heimdal KDC) one should config DNS server by adding: ----- _kerberos IN TXT EXAMPLE.ORG. ----- This doesn't work. DNS servers returns: text = "EXAMPLE.ORG.". This is right, because RFC 1035 allows up to

I noticed that the Supermicro X9SCL has a USB type-a port right on the motherboard. http://www.supermicro.com/products/motherboard/Xeon/C202_C204/X9SCL.cfm Has anyone used a port like this to boot the core OS and used the physical drives for OpenVZ and KVM containers? I figure a 64GB thumb drive would work. Anyone done this or will a USB thumb drive not stand up too the load? Seems much

hi at all, i'm trying to migrate a vm between two host but fails, this is what I did: virsh # start win2008 Domain win2008 started virsh # list Id Name State ---------------------------------- 1 win2008 running virsh # migrate --live win2008 qemu+ssh://host2/system error: internal error Attempt to migrate guest to the same host

Hi Yonghyeon and All, >From time to time I use a notebook and boot FreeBSD from USB stick. FreeBSD 9.2-i386 works OK. So I tried to use FreeBSD 10.0-i386 BETA2 and the network adapter works for some 10-15 seconds and then stops with diagnostic message "msk0:watchdog timeout". I've found similar case at freebsd-current@ with no workaround. Yes, there is an interrupt storm as well.

Hi, [I have added freebsd-security to recipient list as I consider this issue a security risk] Paul Schenkeveld wrote: > Hello, > > On Fri, Jul 14, 2006 at 01:26:38PM +0300, Ari Suutari wrote: >> Hi, >> >> Does anyone know if there are any plans to bring >> pf boot-time protection (ie. /etc/rc.d/pf_boot and >> related config files) from NetBSD to FreeBSD