Displaying 20 results from an estimated 7000 matches similar to: "signalling default value"
2009 Apr 29
2
Something wrong with DAHDI signalling according to the CLI
I have Asterisk 1.4.24 en a Digium TDM410 with EC and with 3 FXO
modules.
When I plug one PSTN-line into a FXO-port I am able to receive calls on
this line and I can also make calls from an internal SIP-phone to the
external PSTN-network.
Still I am bothered about something that appears on the CLI when I do a
reload chan_dahdi.so :
asterisk*CLI> reload chan_dahdi.so
-- Reloading module
2010 Dec 27
1
Asterisk 1.4.38 - unknown signalling bri_cpe
Hi,
we upgraded an Asterisk 1.4 with mISDN to 1.6 with chan_dahdi. Due to
problems with iax channel posted earlier, we wanted to switch back to
1.4 version.
Server has 2 HBA cards, everything is running fine with 1.6, bri_cpe is
recognized and the 7 euroISDN channels are running well, ingoing and
outgoing.
Now we installed 1.4.38 version and no more ISDN. In logs we found this:
[2010-12-24
2009 May 23
1
1.6.0.9: Unknown signalling method 'pri_cpe' ??
I'm trying to upgrade from 1.4.24.1 to 1.6.0.9 with a TE120P card.
I can't make any connection over the T1.
From CLI:
ERROR[26017]: chan_dahdi.c:14300 process_dahdi: Unknown signalling
method 'pri_cpe' at line 37.
cat chan_dahdi.conf
cat chan_dahdi.conf
[trunkgroups]
[channels]
language=en
;internationalprefix = 00
;nationalprefix = 0
context=from-pstn
switchtype=national
2013 Mar 14
3
ERROR: Unknown signalling method ss7
Hi all
I installed
DAHDI Version - 2.6.1
DAHDI Tools Version - 2.6.1
libss7-trunk
Asterisk 11.0.1
from source on Fedora 12 x86_64.
Now i`m unable to load chan_dahdi and libss7:
myserver*CLI> module load chan_dahdi.so
?ERROR[10124]: chan_dahdi.c:17842 process_dahdi: Unknown signalling method 'ss7' at line 37.
myserver*CLI> module load libss7.so
Unable to load module libss7.so
2008 Nov 27
1
Unknown signalling method 'bri_cpe
Hello,
Using libpri-1.4.7 and asterisk-1.6.0.1, I've got "Unknown signalling method
'bri_cpe" when "module load chan_dahdi.so".
Googling with "chan_dahdi bri_net" don't help much.
Shall I upgrade to 1.6.1rcXXX to get 'bri_cpe" support ?
Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
2009 Sep 18
1
No more room in scheduler
Hi,
I running into the following problem on my Asterisk setup:
--snip--
[Sep 3 01:40:59] NOTICE[9170] chan_dahdi.c: PRI got event: HDLC Abort
(6) on Primary D-channel of span 3
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: Asked to delete sched id -1???
[Sep 3 01:47:07] ERROR[9170] chan_dahdi.c: No more room in scheduler
[Sep
2009 Mar 10
3
configuring channels for dahdi
after installing asterisk 1.4.23.1 and dahdi-linux-2.1.0.4 and at CLI> module load chan_dahdi.so receive the following:
signalling must be specified before any channels are.
CLI> Warning [4663]: chan_dahdi.c:11627 process_dahdi: Ignoring signalling
Error[4663]: chan_dahdi.c:10946 build_channels: Unable to reconfigure channel '1'
Error[4663]:
2010 Dec 16
1
PTMP BRI Unable to receive TEI from network in state 2(Assign awaiting TEI) - Asterisk 1.6.2, Latest DAHDI, LibPRI
Hi all,
Last night I went to replace an Asterisk 1.4 + mISDN + b410p box with
Asterisk 1.6.2 and DAHDI BRI - to no avail.
I had two servers so copied network setting etc from the working one,
moved the card across, ran dahdi_genconf etc and it didn't work.
Here's the console output with notices disabled:
lucas*CLI> pri intense debug span 1
Enabled debugging on span 1
[Dec 16
2014 Jan 20
1
ISDN Cause Code 47 Errors
We fairly recently switched service providers for our 4 PRI circuits. Since
that time, we started to notice some failed inbound calls. These calls
terminate with an ISDN cause code 47 'resource unavailble'. Most of the
time I see this error on the first or second channel on the second span in
a trunk group (This is the providers trunk group for hunting, not an
Asterisk trunk group). All
2009 Apr 03
1
ISDN Timer T309
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi everione,<br>
<br>
I'm make some test with pri timer T309. I'm using asterisk 1.4.23.1,
libpri 1.4.9, dahdi-linux 2.1.0.4 and dahdi-tools 2.1.0.2. But in my
tests, the timer fail with a telco
2009 Dec 15
1
dahdi-channels.conf -v- chan_dahdi.conf
Some recent issues I had with hardware seem to come back to not
understanding two very similarly named files:
/etc/asterisk/dahdi-channels.conf
/etc/asterisk/chan_dahdi.conf
I've modified the chan_dahdi.conf to work now, but it would appear all I
needed to do was include dahdi-channels.conf in chan_dahdi.conf and the
problem would not have persisted? Is it me or is that a bit Monty
Python?
2010 May 31
1
Suddenly "HDLC Bad FCS (8)" errors on ISDN-PRI, changed nothing
Hi fellow asterisk users,
I am running Asterisk 1.4.29 with an Digium TE121 card (wcte12xp kernel
module) an approx. 100 snom320. The whole installation is running
without issues since 5 months.
Without having changed anything on the asterisk server for at least 2
months, i noticed "clicking sounds" at external calls over the PRI.
Asterisk constantly throws the following messages:
...
2011 Mar 18
2
Problem routing call to fax machine on DAHDI FXS port
I am running Asterisk 1.6.2.17.2 with a Openvox A400 card with 2FXO/2FXS
modules. I'm trying to set-up things to route analog fax calls from a
FXO port to an analog fax machine on a FXS port on the same card.
Outgoing faxes work just fine. But incoming faces are routed to the
right DAHDI extension, but the call dropped right as the fax machine
rings for the first time. The fax machine
2010 Nov 10
1
MFC/R2 detected as ISDN PRI
Hi list,
I'm trying to setup an asterisk 1.8.0 with MFC/R2, but I'm having these
error messages loading chan_dahdi:
> module load chan_dahdi.so
ERROR[9241]: chan_dahdi.c:11848 mkintf: Signalling requested on channel
1 is MFC/R2 but line is in ISDN PRI signalling
ERROR[9241]: chan_dahdi.c:16180 build_channels: Unable to register
channel '1-15'
I got the config in
2010 Mar 20
1
how to start callerid for india
i belong to india. i am making pbx using sangoma
fxo card. i want that when ever call comes to my PSTN line i should see
the no from where call is coming. so i have to configures
chan_dahdi.conf according to my region. i checked dahdi.conf and in
that they have mentioned for india
2009 Feb 24
2
Configuring chan_dahdi.conf for Sangoma A200/Remora FXO/FXS Analog AFT card
Hi I have been having a rough time getting a Sangoma A200/Remora FXO/
FXS Analog AFT card set up properly.
The main issue is that the card has four ports and as far as I can
tell Asterisk is only seeing two. On the two that it recognizes the
"Green" FXS ports are not green, they just are not lit. The "RED" FXO
ports are indeed red, but from what I have read your not
2010 May 28
3
DAHDI Help (made a cardinal sin :()
Looking for some help from the UK please. I backed up all my Asterisk configuration before re-installing the server from 32 -> 64 bit. Unfortunately I did not transfer the backup to another machine!!!!!
I now have a TDM400P that is not picking up the line. Can you see what I have done wrong when I have rebuilt the config please:
dahdi_scan
----------
[1]
active=yes
alarms=OK
2010 Dec 15
2
Echo Cancellation Problem - Invalid Argument?!?
Greetings folks-
I'm experiencing issues with a freshly installed box. When a call comes in via PRI (Sangoma AFT-A104), I see this in my logs:
[Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 12 (Invalid argument)
[Dec 15 14:26:10] WARNING[23546] chan_dahdi.c: Unable to enable echo cancellation on channel 8 (Invalid argument)
[Dec 15 14:26:10]
2011 Apr 19
1
chan_dahdi under bristuff 0.4.0-RC11 not building under Linux 10.04.2 LTS
Hi all,
I downloaded a copy of bristuff 0.4.0-RC11 on my Ubuntu 10.04.2 LTS server
machine with 2.6.32-24-generic-pae kernel.
The prereq.sh script executes without complaints (BTW on my system,
libncurses-dev evaluates to libncurses5-dev and libz-dev evaluates to
zlib1g-dev).
With the asterisk 1.4.41 package that is installed, a make menuselect
operation indicates that all dependencies are met
2014 Jul 08
1
chan_dahdi.conf sintax
Hi All
This may be a silly question but...
I have this dahdi_genconf generated file:
; Autogenerated by /usr/sbin/dahdi_genconf on Fri Jul 4 22:05:29 2014
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is intended
; to