similar to: How do I remotely force an *unconfigured* Digium DPMA phone to re-query the network for the DPMA server?

Greetings all, After a long day of fighting with GTalk and having it finally working, I wanted to setup DPMA on my Digium phone. So first of all, I had to reinstall it all and reconfigure it all, since it works only on certified versions, and my installation was not from the certified branch. It took a long time of recompiling, testing, adding missing stuff, but I got it straight. Now, I

Is there a way to use DPMA to enumerate the Digium phones that are plugged in and visible in the local network, but not (yet) configured through the DPMA configuration files in Asterisk. I would like to write a frontend that lists the DPMA capable phones, presents a GUI to specify the various options, then write the configuration files as required and make the phones read these settings. Ideally

> > Apparently notify.check-sync does work but only if you're NOT using > the DPMA. I just tried it and the phone just responds with a 200/OK > and does nothing. Did you disable enable_check_sync in the xml config? By default this option is enabled and phones should restart with check-sync SIP NOTIFY

El 06/09/13 14:44, Malcolm Davenport escribi?: > Howdy, > > Please forgive the off-list e-mail. I'm not subscribed to the list, I only peruse the archives. > > The follow up from George is correct. For phones that have already been attached to DPMA, DPMA disables the enable_check_sync phone setting. > > For phones that have not yet been attached to DPMA, that's not

I have the following scenario. A small network has DHCP but does not publish option 66. An Asterisk server is on the network, but the Asterisk version does not support DPMA and it is hard to switch the version. However, there is a possibility to have a web server and an mDNS (Avahi) server. I have been reading about provisioning Digium phones without DPMA, and it mentions that option 66 can

We love our Digium phones and DPMA - but we really need it to work on our Realtime Platform. Otherwise we lose all the cool features and they are just standard SIP phones. Anyone working on a solution for this? Or anyone from Digium see this on the roadmap?

Asterisk 12.5.0 DPMA 12.0_2.0.0 Ubuntu 12.04 64 bit WARNING[5797]: presencestate.c:147 ast_presence_state_helper: No provider found for label CustomPresence ERROR[5797]: pbx.c:4375 ast_func_write: Function PRESENCE_STATE not registered I only see these when DPMA is enabled. Any ideas what causes this or how to correct it? -- Mitch

Hi, I'm just trying to install the DPMA on my Asterisk. I already made the upgrade from Asterisk 1.8.5 to Asterisk 1.8.11-cert2. This is what i did: *mv /usr/lib/asterisk/modules /usr/lib/asterisk/modules-185 * *compiling Asterisk-Cert2 1.8.11* *./configure make make install make config * Afther that i register the DPMA license, and finally copied the * res_digium_phone.so* to

I read somewhere that DPMA is not supported for Asterisk 12. Can anyone confirm or deny that? If not supported yet, will it be? If so, when? -- Mitch

I have been looking for the specs (format, bit rate, ect) on custom ringtones for digium phones. Using the DPMA how would I deliver the ringtone to a digium phone? -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20120820/cb4927d0/attachment.htm>

Hello, I've recently given a try to a Digium D70 phone. At the moment, I'm configuring them though config files with a DHCP server and not using DPMA. Of course, I'm connecting them to Asteris (PJSIP stack on 13.7.0). Which is the best place to: - read about past issues - open new tickets for remaining issues. Best regards -------------- next part -------------- An HTML attachment

Hi all, I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns QuadBRI running in NT-mode. Connected to the BRI-Ports are 12 Fax-Modems (Elsa MicroLink ISDN/TL V.34) which are only operating in dial out analog mode to deliver fax messages. After a while of running fine (50-200 dial out connections) on some S0 spans the following message occurs

Asterisk 12.5.0 DPMA 12.0_2.0.0 Ubuntu 12.04 64 bit [2014-08-21 16:37:49] WARNING[5797]: phone_users.c:5236 set_and_process: User SIP settings missing or invalid I'm getting the error message above when DPMA is enabled, using a fresh build but with my config files from Asterisk 11. Any idea what it means? I can't find the "phone_users.c" file to examine the source

Greetings, We don’t normally announce DPMA releases on here but 3.5.5 was just released which resolves a compatibility issue between the latest versions of Asterisk (using PJSIP 2.10) and DPMA. For TCP or TLS traffic it was possible for a crash to occur. It’s recommended to update to 3.5.5. Installs which select DPMA in “make menuselect” will automatically get the latest version or the tarballs

I have a serious problem that repeats very often, after 30 - 50 calls and I can only solve it by stopped and restarting * :-( After a while, * seems to loose track of something. When an ISDN call from PBX needs to go to the Telco, I get 'Ring requested on unconfigured channel 255/255 span 2' It's always channel 255/255 ??, the 'span' number is random Setup: * between Local

On Fri, May 1, 2015 at 10:43 AM, Robert Broyles <robert at webservicesaz.com> wrote: > We love our Digium phones and DPMA - but we really need it to work on our > Realtime Platform. Otherwise we lose all the cool features and they are > just standard SIP phones. > > Anyone working on a solution for this? Or anyone from Digium see this on > the roadmap? > Hey Robert -

After working fine for a week or so my new Quad E1 asterisk 1.8 system has started rejecting outbound calls from the Nortel BMC 450 it is connected to. The cli fills up with these: sig_pri.c: Ring requested on unconfigured channel 255/255 span 3 Is this likely to be a 1) config error 2) cable issue (I made them) 3) hardware problem with the Digium card 4) software (lib pri) Any clues?

During testing with the Digium phones I have run into a problem where I try to make a change to the sip device name. I make the device name change in sip.conf then make the matching change to the lines in res_digium_phone.conf. I then do 'sip reload' and 'module reload res_digium_phone.so'. I then end up with phones that I cannot bring into service no matter what I have tried. They

Usually I used real Digium cards in asterisk systems, so I'm running into this for the first time. dahdi_tool reports that dahdi_dummy is in state UNCONFIGURED. This isn't super surprising, as it seems like the configuration files for DAHDI are really intended only for configuring real physical cards. But that begs the question: Is there any legal DAHDI configuration for dahdi_dummy such

Hi all, I just posted this question before last week. Meanwhile after upgrading Asterisk 1.0.7-BRIstuffed-0.2.0-RCg to 1.0.8-BRIstuffed-0.2.0-RCh the same problem occurs, but seems to be more seldom. Attached is now the output of "zap show channel" . - I'm running a stable Asterisk on a HP DL380G2 1.4Ghz 0,5GB RAM equipped with 1x TE410P and 2xJunghanns OctoBRI running in NT-mode.