similar to: CentOS 6.4 doesn't work with SAMSUNG MP0402H USB harddisk, but CentOS 5.6 does

Dracut includes what was being patched in Signed-off-by: Mike Burns <mburns at redhat.com> --- scripts/ovirt-config-boot | 47 --------------------------------------------- 1 files changed, 0 insertions(+), 47 deletions(-) diff --git a/scripts/ovirt-config-boot b/scripts/ovirt-config-boot index d13dad2..28d1572 100755 --- a/scripts/ovirt-config-boot +++ b/scripts/ovirt-config-boot @@

Hi I am running a pxe diskless node in f13 and I have some proposals to make ovirt-early working in this version. nash is no more available (nash/mkinitrd is replaced by dracut), so this following command fails : "echo "network --device $DEVICE --bootproto dhcp" | nash" it makes the network configuration incomplete. I replace the linuxrc command by dhclient and it's

- dracut does not currently support booting a dmsquash file system on an iscsiroot - can not be configured in standalone mode since networking is not up, although works fine if ovirt-config-setup is run once booted. Signed-off-by: Joey Boggs <jboggs at redhat.com> --- recipe/common-pkgs.ks | 1 + scripts/ovirt-config-boot | 67 ++++++++++++++++----

Hi, I am trying to boot syslinux with an SD-Card on COMe-mBTi10 board, it works perfect with syslinux 4-06(as BIOS supports booting from SD-CARD), but hangs with syslinux-6.03 during 'Loading vmlinuz ... '. I tried various ways in which I could debug but no hints, just one time I got the error below the loading screen. 'Loading vmlinuz0 ... CHS: Error 8001 reading sector 34(0/3/3)

Hi All, During booting from network i am getting the following error initrd too large to handle, disabling initrd Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) Size of initrd0.img is approx. 317 MB Size of vmlinuz is approx. 4 MB Following is the part of my default file in pxelinux.cfg/ label linux0 menu label MyFedora13 (default) kernel vmlinuz0 APPEND

Hi I have tried to install syslinux 4.06 on the SD card again, it works like a charm. I am being very carefull with c32 files from the same version bootloader. No success. I am also unmounting /dev/sdb1 before installing syslinux, as mentioned in the given documentations. In the pasted syslinux.cfg content--- I have also tried using only one DEFAULT directive. No success. syslinux boots

> > Hi > I have tried to install syslinux 4.06 on the SD card again, it works > like a charm. > > I am being very carefull with c32 files from the same version > bootloader. No success. > > I am also unmounting /dev/sdb1 before installing syslinux, as mentioned > in the given documentations. > In the pasted syslinux.cfg content--- I have also tried using only

Hi there, I just installed oVirt and cobbler (I'm 100% novice!, so this could be a 100% silly question...). I can't get my initial host into the hardware pool. It PXE boots through cobbler, then fails with message "WARNING: Cannot find root file system!" and "Create symlink /dev/root and then exit this shell to continue the boot sequence." I suspect I didn't set

This is an issue I've researched quite a bit on bug lists, and looked in the Syslinux Wiki for a way to do this, but haven't yet found a solution. 1) I have an existing Fedora 13 LiveCD which I burned to a CD and tested on a system without issue. 2) I then took that same ISO and dropped it in my pxelinux.cfg/default for being able to boot over the network. I made sure to extract the

This enables the ability to take the ovirt-node-image iso and deploy it to an iscsi disk. It also provides a sample pxe configuration for booting based on the iscsi root device. Includes support for user/password as well as reverse chap user/password. --- Makefile.am | 1 + livecd-iso-to-iscsi | 201 ++++++++++++++++++++++++++++++++++++++++++++++ ovirt-node-image.spec.in |

This completes the switch to ext3 backed root partitions. /boot is now contained on each Root/RootBackup partition. On install grub is updated to read and boot from the correct partition as well. --- scripts/ovirt-config-boot | 29 ++++++++++++------------ scripts/ovirt-config-storage | 47 +++++++++++---------------------------- scripts/ovirt-config-uninstall | 5 +---

I thought this was just because of various unwise repo mixing that I'd done on my main home server-cum-workstation, but I've been able to duplicate it on a fresh VirtualBox installation. I install the nux repo vlc-core and vlc-extras. I then try to start it from a command line. I get +++++++ main interface error: no suitable interface module [0x1ae5108] main libvlc error: interface

this is cleaner and avoids rebuilding initramfs in the kickstart post it is built with correct configuration for the node image the first time, in kernel posttrans --- dracut/Makefile.am | 3 + ...-3d88d27810acc7782618d67a03ff5c0e41494ca4.patch | 20 ++++++++ ...-93724aa28fc20c8b7f0167201d1759b7118ba890.patch | 37 +++++++++++++++ dracut/ovirt-dracut.conf

Please help with a problem that is slowly driving me nuts :-/ *Quick problem* Can I kickstart an install by reading all the files from a single partition on the system and installing onto all the spare space on the same drive? I am using `harddrive --partition=sda1 --dir=/` but it doesn't seem to work!! *Longer version* I have a server that has no CD-ROM and that I would like to install a

On Oct 8, 2020, at 15:22, H <agents at meddatainc.com> wrote: > > ?I tried moving a PosgreSQL database to an external harddisk due to lack of space on the main harddisks. Not the ideal solution of course but it should work. However, on CentOS 7 the external harddisk is mounted under /run/media and the user. I copied the postgresql database directory and made sure it is owned

Hi, I have a mailgw running Centos where trendmicro(IMSS) is installed. it works perfectly. Now, the problem is it is running out of Harddisk. pls see below and pay attention to / file system (/dev/sda6), where only 1.3 gb is available. these are not Logical volums (LVM) [root at gateway 17141]# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda6 9.7G 7.9G 1.3G

HI Can I install Centos on Segate ST3160812AS ( SATA II ) Harddisk? Asky

I tried moving a PosgreSQL database to an external harddisk due to lack of space on the main harddisks. Not the ideal solution of course but it should work. However, on CentOS 7 the external harddisk is mounted under /run/media and the user. I copied the postgresql database directory and made sure it is owned recursively by postgres, changed the necessary settings in both the systemd unit and the

I got the have install a SATA HardDisk on the machine recently. But somethings the Disk cannot be accessed. And mesg tells that it is IO error. Is it a hardware problem or system setting problem. Here is the message from dmesg. sd 0:0:0:0: SCSI error: return code = 0x00040000 > end_request: I/O error, dev sda, sector 27099199 > EXT3-fs error (device sda1): ext3_readdir: directory #1687553

116M ovirt-node-image/ovirt-node-image.iso 119M ovirt-node-image.iso.edited.iso --- edit-livecd.py | 24 +++++++++++++++++++++++- 1 files changed, 23 insertions(+), 1 deletions(-) diff --git a/edit-livecd.py b/edit-livecd.py index 279b225..ebcb7a6 100644 --- a/edit-livecd.py +++ b/edit-livecd.py @@ -26,7 +26,7 @@ import shutil import subprocess import optparse import logging - +import