similar to: Digitial Phones

Hello; If I have load up to 220 extensions with 50 concurrent calls. Can one hardware server carry all this load? What is the hardware server required for this? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20130714/b63756d2/attachment.htm>

Dear; Thanks a lot for guiding me. Is it possible that the installation libpri-1.4.11.5 newer than the libpri-1.4.11.5-patch? Well, when I typed (note: I am trying to apply the libpri-1.4.11.5-patch for the libpri-1.4.11.5): libpri-1.4.11.5# patch -p0 -i libpri-1.4.11.5-patch It gave me that patched detected as shown below (example of one file, and I got same for other files): patching file

Dears; To patch libpri: I just place the patch file in the libpri source directory and then I run make and make install? Or I need to compile the dahdi and asterisk also? If the problem stayed, do I have to go for previous libpri version? Or for previous dahdi version and asterisk version? Regards Bilal ----------- > bilal ghayyad wrote: > > But I am afraid it is a bug because I

I am talking about the SIP. Now the new mobiles (Nokia, Erecson, Panasonic, iPot, ... etc) all of them support SIP capability. They are able to register to any SIP server (by giving the IP address, username and password). Fring is one of the software that can be installed on the mobile devices and can register on the SIP servers. BUT, the new mobiles currently come with built in SIP (no need to

Hi All; How to let the virualbox (ubuntu OS) to be able to see the digium card? Because when I install elastix or asterisk with dahdi, it is not able to see the digium card if the installation though the virualbox .. What is the solution? Regards Bilal

Hi Danny; Really I did not understand how I can determine if the IO will be DB or conf files? Is it from the Asterisk manager? Regards Bilal ------------------------- It depends on how you are configured. The gui interfaces using Asterisk Manager, so you get the Same IO from the gui that you would get from a native manager session. -----Original Message----- From: asterisk-users-bounces at

Hi All; Can anyone advise if using Cisco IP Phones in skinny protocol is fine or not? Or it is better to use it in SIP protocol? Regards Bilal

Hi List; How can one Asterisk Box A to send a SIP call for another Asterisk Box B, and that call to be authorized based on the username and password, and not on the IP (as the IP address of the source is not known because it keep changing)? I think the trick in the Dial command, how to write it properly in a way that other Asterisk Box can recognize the sip username and password which are existed

Hi All; When the call coming via the E1 dahdi and I handle the call (as first step) by exten => 5631040,1,Goto(OrangeCMG,s,1) it is not working and the call will be disconnected instead of queued. But, when I handle the call (as first step) by playing any sound file and then send for the queue, then it is working fine, WHY? exten => 5631040,1,Playback(WelcomeMessage) exten =>

Hi All; My ISDN was working fine, and suddenly I start getting the below: sig_pri.c:985 pri_find_dchan: Span 1: No D-chanannel anyway! There is a Yellow Alarm, so what it could be the problem? My configuration as following: system.conf span=1,1,0,ccs,hdb3,yellow bchan=1-15,17-31 dchan=16 chan_dahi.conf context=IncomingPSTN group=0 signalling=pri_cpe switchtype=euroisdn

Hi List; I need to configure a softphone to be client and use it with Asterisk, which is the recommended one? Is it iax2? Regards Bilal ____________________________________________________________________________________ Boardwalk for $500? In 2007? Ha! Play Monopoly Here and Now (it's updated for today's economy) at Yahoo! Games.

Hi; How can I know the duration that the DAHDI channel is still used? I need to know its status and since when it is in this status, how? Also, is it possible to hangup the channel if it has been openned more than 90 minute? Other than using the timeout in the Dial command (because this I know it). What is happening with me that from time to time, I find some DAHDI channels are stayed connected

Hi All; I do not know if anyone faced such case in dealing with open vpn (as we need it for fring to be used from the mobile: Which mobile can be used to install the open vpn client on it, so we can use it to do a vpn channel with the server that has open vpn server? Regards Bilal

Hi All; Again, the Cisco IP Phones 7942G and using Skinny: I upgraded the firmware to version 8.5 (skinny) and I am using skinny channel (chan_skinny) and the skinny.conf file. The phones are registering, but when we use them to place a call, we only hear tooooooooooo in the handset and we do not hear voice (even when we dial the digits, we only hear toooooooo .. but it dials and destination

Hi All; Anyone knows if there is an Asterisk version that setup can be stored in Database instead of the configuration files (.conf)? Any advise? Regards Bilal

Hi All; Any one advise for open source prepaid billing other than A2Billing that can work with Asterisk and it is rich by features (for large business)? Regards Bilal

Hello; I need to use Cisco IP Phones with Asterisk and I have some questions to know how to use it if someone can advise: 1) How I can assign for each button an extension? 2) How I can assign for specific button a feature to be used (like call forward or call pickup .. etc)? 3) As you know that it is required to have a correct username and password to login, so where to give the username and

Dears; The problem was related to something else. The Digium card has two PRI ports, actually to get it UP, I have to configure the two ports and both of those two ports to take the timing from span 1. Why this, I do not know ! Although I am using only one E1 connected to span 1, so why I have to configure the other span !! After configuring the second span, so now one D channel for span 1 is

Hello; Is there a method "way" to be able to dial the phone number through asterisk from the outlook email contact? Regards Bilal -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20140128/17174762/attachment.html>

Hi All; I tried Firefly softphone with IAX and it gave very poor quality. Any one advise a good strong softphone that can work with IAX fine? Regards Bilal ____________________________________________________________________________________ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ