similar to: Weird I/O hangs (9.1R, arcsas, interrupt spikes on uhci0)

I am running FreeBSD/amd64 9-STABLE (built Mon Jul 23 10:45:51 EDT 2012) on a Dell Optiplex 760 and, today, noticed I had almost 30% system CPU load in top even when the system was idle. A perusal of vmstat revealed the cause to be excessive interrupts on uhci0, even though nothing was plugged into that USB port: # vmstat -i interrupt total rate irq4: uart0

----- Original Message ----- From: "Ivan Voras" <ivoras@freebsd.org> >> The machine is running with ULE on 7.0 as mention using an Areca 1220 >> controller over 8 disks in RAID 6 + Hotspare. > > I'd suggest you first try to reproduce the stall without ULE, while > keeping all other parameters exactly the same. Ok tried with an updated 7 world / kernel as

> From the provided documentation I understood that in memory data > structures of a PNaCl program are incompatible to the host program because > ABIs are different (e.g. PNaCl pointers are always 32-bit even when running > on x86_64 platform). > So PNaCl program can't access any data structures of the host program > directly. The only communication way is by using syscalls,

Dear colleagues, I'm planning to debug usb connection with my new SONY CLIE handheld, and found that this process is much complicated by the fact usb.ko module can not be unloaded 'cause some process is referencing it: marck@revamp:~/tmp> kldstat -v -i 11 Id Refs Address Size Name 11 1 0xc0cf7000 1b000 usb.ko Contains modules: Id Name

Am 19.06.2013 18:01, schrieb JF Bastien: > > From the provided documentation I understood that in memory data > structures of a PNaCl program are incompatible to the host program > because ABIs are different (e.g. PNaCl pointers are always 32-bit > even when running on x86_64 platform). > So PNaCl program can't access any data structures of the host >

Hi, I have Orinoco 802.11b PC Card from Proxim. I plugged it to pcmcia slot, but It doesn't work - no blinking LEDs, no wi0 in ifconfig. I have 7.1-PRERELEASE, laptop Prestigio Nobile 157. On NetBSD seems working, but NetBSD is not friendly with me. if_wi driver included in kernel. ----- dmesg Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,

Hi, I currently encounter spin lock 0xc0c83ba8 (sio) held by 0xc6337460 (tid 100005) too long panic: spin lock held too long cpuid=3 on hp server with two dual-core intel xeon (3.8GHz) and 3GB RAM. System is 7.1-PRELEASE last fetched 29.11.2008, 17:58 UTC. This happens with VSCom Card that was previously in use in a 5.3-STABLE system (also hp server, but older hardware) without problems. The

Hi All, I installed snv_b81 in my portable hard disk(capacity 160gb with 2 partitions, one for solaris and other for windows). When I tried to boot into dom0 from grub, I got the following errors and the system gets hanged. Warning : No SOF interrupts have been received, this USB EHCI host controller is unusable panic[cpu0]/thread=f502ae20:cannot mount root path /pci@0, 0/pci8086, 5641@1d,

Hello all! I've been trying to get my UPS working with my OpenBSD stable box and I haven't had any luck yet. dmesg shows that I have something from Powerware usb0 at uhci0: USB revision 1.0 uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1 biomask f5fd netmask fffd ttymask ffff ugen0 at uhub0 port 1 "Powerware Powerware UPS" rev 0.20/0.50 addr 2 nut version

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

Graham Bentley wrote: > Recently swapped out my Sony for a HP DAT and > got this first time in dmesg > > (sa0:ahc0:0:6:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 0 0 > (sa0:ahc0:0:6:0): CAM Status: SCSI Status Error > (sa0:ahc0:0:6:0): SCSI Status: Check Condition > (sa0:ahc0:0:6:0): UNIT ATTENTION asc:28,0 > (sa0:ahc0:0:6:0): Not ready to ready change, medium may

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hi All. I am using: #rpm -qa | egrep ''puppet|facter'' puppetlabs-release-6-7.noarch puppet-3.1.1-1.el6.noarch facter-1.7.1-1.el6.x86_64 on: #cat /etc/redhat-release ; uname -r CentOS release 6.4 (Final) 2.6.32-358.11.1.el6.centos.plus.x86_64 My hostname is server.one.two.com: # hostname server.one.two.com # hostname --fqdn one.two.com #grep HOSTNAME /etc/sysconfig/network

I‘m very exited to hear that qemu has supported live migration without shared storage and I also have found some persons give their experiments, for example: （http://blog.allanglesit.com/2011/08/linux-kvm-management-live-migration-without-shared-storage/） # virsh migrate --live vmname qemu+ssh://kvmnode02.allanglesit.net/system --copy-storage-all --verbose --persistent --undefinesource I

Dear All, I have 2 samba4 DC as pdc and bdc. How to replicate DNS changes from pdc to bdc? Is it something that I have to do with bind DNS or something samba4 will take care? //Remy

Hi I have a newly installed FreeBSD 6.0 release machine on which I am getting the following error on the console: "ad4: req=0xc23bc258 SETFEATURES SET TRANSFER MODE semaphore timeout !! DANGER Will Robinson !!" This is generally associated with heightened disk activity, but it happens inevitably after a while (minutes or hours) if the machine is running. The atacontrol list shows:

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

On 18 June 2013 15:27, Dmitri Rubinstein <dmitri.rubinstein at googlemail.com>wrote: > Is it possible to use PNaCl infrastructure (i.e. translation and execution > in a sandbox) without a Chrome ? > > I mean a something like a standalone VM like Java or Mono/C#. > Yes. The NaCl tool 'sel_ldr' will run a program inside a sandbox outside of the web browser. We do a

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The