similar to: define extension to send calls to gatekeeper

We have a customer on a wireless connection that has very bad jitter. They can hear people fine, but people have a very hard time hearing them. They are connected via a SPA-2102. It is a SIP client going to a SIP trunk. Something like this in sip.conf [general] would be in effect for all SIP clients: jbenable = yes jbmaxsize = 150 jbresyncthreshold = 1000 jbimpl = fixed jblog = yes I only want

Hi, do you have NAT between Asterisk and agent phones? S pozdravem Tomáš Holý Hi Tomas Thanks for replying. Yes, the phones are in one location in a LAN and are then NATed to enable them to contact the Asterisk which is hosted in the cloud. A typical sip.conf phone configuration on the remote server for the site is [general] session-timers=refuse disallow=all allow=g729:20 allow=ulaw

Hi all, I'm fighting with a really strange problem that is really busting me. I have an asterisk 1.4.22 ( from a trixbox 2.6.2 ) and mISDN 1.1.7 3 extension on hardphone and 3 extension in softphone ( zoiper ) What happens is that sometimes the people on the other side of communication hear my voice as metallic and chopped. This happen either on incoming call than on outgoing call. If I

Hi Guys I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest of the ports in their own groups so that I can have different signaling on each? [channels] language=en switchtype=euroisdn pridialplan=unknown resetinterval=600 echocancel=yes echotraining=yes

Hi, I am trying to communicate H323 and SIP users. I have configured h323.conf, sip.conf and ooh323.conf. If I am using gatekeeper (gnugk) then I am able to call successfully to h323 users using SJphone. And same for SIP users also. But when I disabled gatekeeper and trying to call using gateway with sjphone then every time whatever number I dial the call goes to asterisk and some computerized

4 Port PRI sangoma a104 From: jg [mailto:webaccounts173 at jgoettgens.de] Sent: Wednesday, March 18, 2015 2:09 PM To: Andrew Colin; Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [asterisk-users] 4 Port PRI I have a 4 port PRI card that I need to setup each port in their own group. In chan_dahdi.conf I have the following which works for one port How do I add the rest

> I have a 4 port PRI card that I need to setup each port in their own group. > > In chan_dahdi.conf I have the following which works for one port > > How do I add the rest of the ports in their own groups so that I can have different signaling > on each? > > [channels] > > language=en > > switchtype=euroisdn > > pridialplan=unknown > >

Hi, I have a SIP client which is registered to asterisk. Asterisk is registered to a SIP trunk and also handles the media. Now since my client has some issues in its RTP Tx, which seems to have some amount of jitter (mean jitter as per ethereal trace is about 17ms, max jitter is 20 ms and max delta is 85 ms), to over come that I have enabled jitter buffer in the SIP channel by setting sip.conf

Has anyone had any luck getting Asterisk 1.6.2.13 to register to a Tandberg Gatekeeper? The logs on the Asterisk end seem to show that the registration request is sent, and the Tandberg Gatekeeper responds. However, the response doesn't seem to be what Asterisk was expecting. Here is my ooh323.conf, followed by the relevant portion of the h323_log: [general] port = 1720 bindaddr =

Hi all again, I've got a problem with sporadic one way audio calls, which means sometimes I can't hear the calling party (call is established, but audio is missing). Today I received ~90 calls, one of them got this problem. I've got two networks involved, without NAT: - 192.168.1.X, in there one nic of my server and all the phones - a private net to my provider, in there a nic of my

Hi, Asterisk 1.4 Working (jitter buffers created as expected): ZAP -> SIP SIP -> ZAP Not working (no jitter buffers created): SIP -> chan_local (with /nj) -> ZAP SIP -> chan_local (with /j) -> ZAP SIP -> chan_local (with no flags) -> ZAP I have this in zapata.conf: jbenable=yes jbforce=no jbimpl=fixed jbmaxsize=300 Is there something I haven't tried that will make

Hi, Someone released a succefull interconnection in H323 with WTL equipement ? I'm trying to do that with an IPNx. But get dead air. With chan_oh323 it's fine, all works. With chan_h323 => dead air. The configuration is GW to GW. This is my configuration from h323.conf: [general] port=1720 bindaddr=my.ipaddr dtmfmode=rfc2833

Hi guys, I have a bunch grandstream phones using ulaw and my users are complaining they are jittery when I use "canreinvite=yes". The data connection is an ADSL link dedicated for phone traffic. At any given time, I have at most 2 calls in parallel. I'm not a huge fan of asterisk being in media path doing buffering because the delay (jbmaxsize=80,jbimpl=fixed) is pretty long and

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- <DAHDI/2-1> Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- User entered

Hello, For the moment I have the following settings in my sip.conf. I want to optimize them to archive the following things: - for the moment all my users will re-register too often. I want that only lagged users to re-register quickly. - check from time to time all users but no too often to see if is logged and can be called. Overall i want only lagged users to reregister and users with good

Hi all, I'm new posting here, though not to perusing. I'm having an issue with attended transfer and was wondering if anyone had heard of the problem/had any suggestions... Apologies in advance if this post is excessively newb-oid. - An incoming call C is passed to A, a POTS telephone connected via a Handytone 286 ATA. - A presses atxfer key, then dials B, a Win XP laptop running

Hello guys, I am having some problems with calls comming from the PSTN lines, when somebody calls people can't hear me, but I can hear them, every day I have to do a /etc/init.d/asterisk stop && /etc/init.d/dahdi restart to have calls with sound again, wich cli dubug commands can I use to see what is going on, here I have my chan_dahdi.conf and sip.conf, I am using 1.6 Thanks a lot!

Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:7] Read("DAHDI/2-1", "PIN|enter-conf-pin-number||||") in new stack Jan 19 10:00:29 VERBOSE [7177] logger.c: -- Playing 'enter-conf-pin-number' (language 'en') Jan 19 10:00:43 VERBOSE [7177] logger.c: -- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: --

Hi ! I am trying to connect Asterisk with Avaya Definity. I use this tutorial to do this http://cyril-constantin.blogspot.com/2008/04/howto-connect-avaya-to-asterisk.html The comunication between avaya and asterisk is fine but without sound. I can call from Asterisk to Avaya and extension ring or Avaya to Asterisk and extension ring too but I cant hear anything Example Asterisk ---> Avaya --

On Wed, Jun 16, 2010 at 4:35 PM, Shina Owolabi <shinacalypse at gmail.com>wrote: > Hi! > I've installed Asterisk 1.4.32 with freepbx-2.6.0 in an attempt to provide > a conference bridge for an existing Avaya PBX. I have no control over the > Avaya system, but I am able to speak with the admin in charge when I need > stuff done. I am running all this in a VirtualBox