similar to: CentOS 5.1 on Dell R200 with 6iR?

I accidentally noticed this error written to the warn log on my Dell R200's when the machines booted up after latest kernel update. Google doesn't have this exact error, only a few with differently named devices, but all seem to have to do with USB. Could this be a bug? Didn't see this error on other machines with more than one USB port, though. Jun 26 22:59:07 c4 kernel:

Basically the issue comes down to my Volume Groups not being found by this initrd, causing good ole kernel panic. initrd-2.6.12.6-xen3_12.1_rhel4.1.img [root@xen01 lvm]# uname -a Linux xen01.inside.***.com 2.6.9-22.0.2.ELsmp #1 SMP Thu Jan 5 17:13:01 EST 2006 i686 i686 i386 GNU/Linux [root@xen01 lvm]# cat /etc/redhat-release Red Hat Enterprise Linux ES release 4 (Nahant Update 2) Everything

Hi, all! I want to change current RHEL 4.0 ES into CentOS 4.2 on Sun X4100 server. The server has SAS SCSI based two 2.5" hard disks. I could only install RHEL 4.0 Update 1 because the server is equipped with RHEL 4.0 Update 1's device driver only. I've included below the boot process messages concerned with SCSI controller. If it's possible for me to install CentOS 4.0 on my

I am getting the following error on boot on a new install Centos 51: #/bin/sh ro no such file or directory then a kernel panic I have traced it to the call ''switchroot'' in the init script in the initrd. the exact same build without zen has no problems. the boot messages look like: Attaching to iSCSI storage iscsistart: transport class version 2.0-724. iscsid version 2.0-865

I've been having an extremely hard time using the on board SATA controller on my nvidia based board. I have two 160gig Maxtor SATA drives attached to the on board controller, setup as software raid0. The problem is the array is extremely unreliable, where I'm getting constant I/O errors like: sd 0:0:0:0: SCSI error: return code = 0x00040000 end_request: I/O error, dev sda, sector

subsequent to a fresh svn checkout, configure, make: make[5]: Leaving directory `/udd/stvjc/JEDI/R200/src/library/tools/src' make[4]: Leaving directory `/udd/stvjc/JEDI/R200/src/library/tools/src' Error in loadNamespace(package, lib.loc, keep.source, TRUE, TRUE) : 'tools' is not a valid package -- installed < 2.0.0? Execution halted make[3]: *** [all] Error 1 make[3]:

I have a perc5i (and perc5e) raid controller in my poweredge 2970 running centos 5.5. The RAID controller config is set for write-back policy, which I can confirm by checking in OpenManage. I also called Dell and ran their reporting application and had them double check to make sure everything looks OK hardware wise and they confirm that it does Yet when CentOS boots is appears to use the

El lun, 23-10-2006 a las 16:28 +0400, Kirill Korotaev escribi?: > J.J.Garcia, > > in july 2006 you reported hit of bio.c:99 bug on CentOs kernel: > http://lists.centos.org/pipermail/centos/2006-July/067539.html > > Recently, we also hit the same bug, so maybe you can provide some details on: > 1. whether it is doesn't work for you or was fixed. > 2. how it was

Fresh install of CentOS 4.4. uname -a, lspci, & lsusb output at bottom. I insert my 256MB USB key, light goes on, then off. Never mounts. Here's the end of dmesg: usb 1-1: new full speed USB device using address 11 scsi7 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: STORAGE DEVICE Rev: 1.02 Type: Direct-Access ANSI SCSI revision:

Dear All, I have using CentOS 4.4 and My PC USB Drive is detected and but the device "/dev/sda1" is not initialized and i have executed the dmesg command and I am getting the following messages usb 1-6: new high speed USB device using address 2 SCSI subsystem initialized Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage

I''ve compiled the 3.0-devel version on SUSE Linux 9.3. The ony problem is the qla2300 driver, which will not start all correctly on boot. So i cannot see other partitions than sda. --------------------------------------------------------------------------------- QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 24 (level, low) -> IRQ 185 qla2300

I recently bought 2 different USB flash disks. These are some cheap no-name devices. Their parameters: bytes C/H/S ID 4194304512 509/255/63 Vendor: Generic Model: USB Flash Drive Rev: 1.00 ANSI SCSI revision: 02 4288676352 1023/132/62 Vendor: USB Model: USB 2.0 Rev: 1.00 ANSI SCSI revision: 02 When I put a FAT32 filesystem on them,

Hi, we are currently working on getting windows working on your xen servers. but we are facing a severe problem where dom0 and all domus hang for 1-5 seconds from time to time. we think it is probably because of disk i/o, because top sometimes says 100% wa (waiting on io) during the hang. dom0 has cpu 0 for exclusive use and the windows vms use cpu 1 to 7. should we give dom0 more than once

I recently came across an enormous cluster of x86 clone machines running fedora core 1 (2.4.24) which have typically all intel or amd have VIA IDE chipsets. They frequently experience corrupted journals rendering the ext3 partition in read-only mode. More important than recovering the filesystem, I am interested in finding the root of the problem. The common hardware that all of these

I may have asked about this before, but I can't find any records of so doing in my saved mail (which includes almost everything I ever read or write): All of a sudden, I am not getting flash drives automatically mounted in CentOS 5.3 with GNOME - they are recognized by the hardware, but there seems to be a (new?) problem with the maps. Here's the tail end of dmesg: usb 1-10: new high

Hi Friends, I have an Excalibur 4GB USB Pen Drive Model Number EXC4. I think it is getting detected by the Centos but I am not sure about the mount point or the device point it is taking /dev/s?? Logs from /var/log/messages. Mar 11 11:30:06 l_l_box kernel: usb 1-1: USB disconnect, address 3 Mar 11 11:30:22 l_l_box kernel: usb 1-1: new high speed USB device using address 4 Mar 11 11:30:22

I have an old RHEL3 box that I am upgrading to CentOS5. I picked up a new Dell Poweredge R200 to use for that. Is there an easy way to copy all the user accounts and existing mail from the old server to the new one? Thanks. -- -=/>Thom

Hi people, I installed a via SATA controller in a CentOS release 3.8 (Final) - I needed additional disk space. After the first boot, the kudzu service, added the following line to /etc/modules.conf: alias scsi_hostadapter sata_via and I rebooted. After reboot in dmesg one can see: scsi0 : sata_via scsi1 : sata_via Vendor: ATA Model: SAMSUNG HD080HJ Rev: WT10 Type: Direct-Access

Hi all I've been thinking about using CentOS on a Dell R200 server and turn it into a firewall / network monitor / traffic shaper in our datacentre, instead of using a dedicated firewall device. One of the devices that I have been looking at, with my limited budget, is the D-Link DFL 860 - http://www.netdefend.eu/Product.aspx?m=15&ref=DFL-860 It provides AV, SPI, VPN, DOS, P2P, etc

I'm not reporting a bug (I know it's not the right place to do that anyway), but a little help would be appreciated. Once again I run into the famous "compiz: GLX_EXT_texture_from_pixmap is missing" error. The problem is I can't figure out what's wrong. I use fedora core 6 on an athlon XP with an ati RV250 and the radeon open-source drivers running compiz reports: $