similar to: sfq as solution to "Small ISP problems" and "How could I do this?"

Dear All, Sorry to trouble again..... After go through www.lartc.org I have implemented the HTB instead of CBQ for the same scenario. Now following files are under /etc/sysconfig/htb directory. eth0 DEFAULT=30 R2Q=10 eth0-2.root RATE=256kbps BURST=25k eth0-2:10.comp1 RATE=120kbps BURST=12k PRIO=0 LEAF=sfq RULE=192.168.200.0/24 eth0-2:20.comp2

Can I use the same SFQ queue dicipline for all the classe in a CBQ or HBT system?

Hi If I use sfq qdisc on a CBQ class I get a lot of dropped packets and the backlog itr almost always to its full value: 128. From the HOWTO I understand that the queue is at 128 packets, and SFQ shows 128/1024 flows , but how can I increase that value ? I have tried ip link set txqueuelen but this only increases the tx queue on the interface. qdisc sfq d468: quantum 1514b limit 128p flows

We''re testing out the Puppetlabs-Firewall module. And it seems I''m either missing something fundamental or Logging/Accpet works/doesn''t work in an irregular way. I would be most grateful for some input. *COMMON:* firewall { ''002 accept related established rules INPUT'': proto => ''all'', state =>

Hello everyone, I''m a newbie experimenting with CBQ shaping and am facing a few problems. Can any of you please help? TEST SETUP: +---------------+ +----------------+ | 10.0.0.103 |----------->| 10.0.0.102 | +---------------+ +----------------+ 10.0.0.103: Linux, 100Mbit/s NIC 10.0.0.102: Windows, 100Mbit/s NIC, iperf tcp server (ports 2000 and 2001) WHAT I

Hi, I''m work on traffic shaping and I would like to know if it''s possible to mix differents Queueing Disciplines ?? I would like to combine the proporties of a PRIO discipline with that of a CBQ discipline. I read some documentation and I found nothing about that, can you help me ? I think to try something like that : tc qdisc add dev $DEV root handle 1: cbq … tc class add dev

Hello, I have problems setting up HTB. This is my setup : NET 1024/256 ADSL || eth1 Linux Firewall eth0 || LAN 10.a.a.a I want to GUARANTEE for an IP (10.x.y.z) a 800kbit bandwidth for HTTP download. But When 10.x.y.z does no HTTP download, other trafic must get the whole bandwidth, of course. The script I use (see below) is quite the same as presented at (the greeeeat page) :

Hi, I managed to fix 128kbit for an IP address of 192.168.200.3 as below: - tc qdisc add dev eth3 root handle 1: cbq avpkt 1000 bandwidth 100mbit tc class add dev eth3 parent 1: classid 1:1 cbq rate 128kbit allot 1500 prio 5 bounded isolated tc filter add dev eth3 parent 1: protocol ip prio 16 u32 match ip dst 192.168.200.3 flowid 1:1 tc qdisc add dev eth3 parent 1:1 sfq perturb 10 How can I

Hi everyone, This is on a linux box, ingress (eth1) at 100Mb/s and egress (eth0) at 10Mb/s. The purpose is to test CBQ Here is my script ------------------------------------------------------------------- # Root qdisc tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 9Mbit \ avpkt 1000 cell 8 # Classes tc class add dev eth0 parent 1:0 classid 1:1 cbq bandwidth 9Mbit \ rate 5Mbit weight

I''ve been following the HOWTO, and reading mailing list discussions about throttling bandwidth, and have had some success, but I just want to tie off some loose ends. Essentially what I am wanting to do is to keep our bandwidth usage below 1megabit, because if we go over we get charged for that traffic. I''ve used some of the examples from the HOWTO to limit our bandwidth, but I

Hello, I''m using tc to limit the bandwidth of our wireless customers. I have a working script, but I''m not happy with it. I''m trying to write a more sophisticated script, but when I run it, it give me this error: RTNETLINK answers: File exists I have no idea what this error means or how to fix it. Here is a portion of the script (the whole script shapes several

Hi all, I have installed 2.4.5 kernel, Debian Potato. my tc script: #!/bin/bash tc qdisc add dev eth1 root handle 20: cbq bandwidth 10Mbit avpkt 1000 echo root tc class add dev eth1 parent 20:0 classid 20:1 cbq bandwidth 10Mbit rate \ 10Mbit allot 1514 weight 1Mbit prio 8 maxburst 20 avpkt 1000 echo class tc class add dev eth1 parent 20:1 classid 20:100 cbq bandwidth 10Mbit rate \ 5Mbit allot

Hello, really new to advanced linux routing, but I have managed to setup something that sort of works for my needs. I have a linux box with this configuration: Internet - eth0 - eth1 - many users I''m using a NAT to allow my users Internet access. On some users, I wish to shape their download speeds as to not overload our outside connection. Here is what I do to shape them at 64k

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

Did anyone ever answer this one? THIS is what I am trying to do: >[LARTC] cbq+sfq and DSCP marking >Maria Joana Urbano stmaria@dei.uc.pt >Thu, 13 Feb 2003 19:29:42 +0000 > > * Previous message: [LARTC] Monitoring.... > * Next message: [LARTC] two routes 1 network card > * Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] >

Hi, When i do ''wshaper start'' the interface i have defined stops routing traffic for some reason. It resumes routing when i do ''wshaper stop''. I''m using debian stable (3.0 woody) with debian''s default 2.4.18-686 kernel. When I run the script I get no errors, and when I do a ''status'', everything looks correct. Can ANYONE

I notice one other small problem with my modified version of SFQ. The fact that packets can be dropped at dequeue time is incompatible with the way HTB (and probably CBQ and others modeled on it) keep statistics. When I fill a low rate queue causing packets to expire and be dropped at dequeue I get interesting statistics like this: This is my variant of SFQ qdisc plfq 8016: dev eth1 ... Sent

Hi folks, I read the fantastic LARTC How-to and after that i tried to limit one host in my LAN for both down-and upload bandwidth usage. I took section 15.9. and added uplink-limiting as I understood it from the previous chapters. Unfortunately it doesn''t work. I ran the script and went to the specified PC, started a download, and watched the rate. The rate was always about 2000 kbit/s,

Hi i need a cbq configuration that works and drops packets if the flow exceeds an amount of data.. Do u have any configuration that drops packets...? My cbq configuraion doesnt drop packets... The traffic use the correct class but seems that tha cbq is not able to control correct the flow __________________________________ Do you Yahoo!? Yahoo! Small Business - Try our new resources site!

I find the negative attitude toward CBQ to be distracting and non-professional in the HOWTO. I''ve re-read it for the first time in about a month and comments like "This can be configured in a variety of ways, which I do not understand. Use HTB" do not encourage me about the writer. This is not a personal critique, as I can imagine this being said on a personal website,