similar to: RE:u32 filters and compression

Hi guys I have a config as follows for one of my networks. I want to give the xxx.xxx.xxx.xxx/xx network 64kbit for everything from the internet but 8000kbit from our internal servers on yyy.yyy.yyy.yyy/yy network. It does not work. I only want to use u32 filters. I think what's happening is the first flowid of 1:21 is catching them and not getting to the 1:40 flowid. Is this right? The box

I'm trying to use Samba to get access to my Unix printer. Unix System is FreeBSD-2.2-stable, and I'm running the latest port of Samba for FreeBSD-2.2-stable (Samba 2.0.0) from ftp.freebsd.org. I've checked all the references I can find on the web, and can't see the problem. Can anyone point out what I'm doing wrong. Under NT (adding remote printer), I see the entry for the

My mission is to get one * box to dial another * box' extensions. I have set this up previously without any issues by making a simple IAX trunk/extension pair on the two boxes and create a dial plan with a prefix like 9|XXX to select an extension on the other box. My problem is that I now have to do this with extremely restrictive firewalls thrown into the mix - firewalls I have no control

I''m using a cluster of mongrels behind an apache 1.3 proxy pass. I''ve been passing the request to pen, which in turn balances the cluster of mongrels. Now, I''d like to be able to use a different server to send the static files created by the rails application, so I tried to replace pen with nginx. Everything seems to work fine except the environment variable REMOTE_ADDR.

I want to try to get VGA passthrough working in a Windows 7 x64 domU. I''m running debian squeeze/testing/unstable with Jeremy''s 2.6.32.x kernel. The best I got to work is the device showing up under Windows 7, with all resources and whatnot. I''ve applied the vga-loadbios patch and vBAR-pBAR patch to xen, and the vBAR-pBAR patch to qemu-dm. This behaviour

Is there a package that will allow me to fit Brownian motion and Ornstein?Uhlenbeck models of evolution for discrete traits? I know that geiger and ouch have commands for fitting these models for continuous traits, but these aren't suitable for discrete trait evolution, correct? -- View this message in context:

hi all, i want to try htb3 with imq downloaded & patched imq & htb3 with kernel-2.4.18 on rh7.2 but got STUCK on step 1 :( this are what i did can anyone guide me what went wrong on the first step itself !! [root@cab1 root]# modprobe imq numdevs=1 modprobe: Can''t locate module imq [root@cab1 root]# [root@cab1 root]# tc qdisc add dev imq0 handle 1: root htb default 1 Cannot find

Ouch, part reset, quickly restoring reality (0) Power alarm on module 1, resetting! I have looked though a lot of email on this issue, and no one seems to have the answer. How many people are seeing this on a TDM400 card? Does anyone have a "REAL" answer to it. Yes, I do have the power connected to it! Regards Garry Taylor

Hello, I have an interesting question. I can''t find a solution anywhere to this problem. I have an adsl connection which is able to send a full data packet in about 150ms. I want to cut this time down to decrease latency while serving files, so I thought I''d try and reduce the packet size for the offending upload streams (my webserver). The trick is that I also want all other

Hi, for interested in participation on finishing new HTB developement I created simple docs regarding it. It is some insight into CBQ and HTB workings and problems. See luxik.cdi.cz/~devik/qos/htb/v3/

Hi List, many People seem to be interested in the Graphic-Card Passthrough Feature (for more or less obvious reasons). Official Support is still under development, and i hope not to interfere with it in any (bad) way ... But i remember my own painfull and timeconsuming research when i wanted this feature to work, so i thought perhaps this spares some time for the unpatient users like me :)

Hello Samba List, i have problems sharing, or better connecting to a printer shared via samba (3.0.10): Situation: - W2K ADS Domain - which auth's the users - WXP Client, which log's in via the W2K-ADS (and auth's of course) - Samba (Linux) ADS-Member, which shares Printer and $HOME - security=ADS - winbind to get AUTH-Info from the W2K ADS Controller Everything seems to work

In pirq_check_eoi_map use the pirq number rather than the Linux irq number to check whether an eoi is needed in the pirq_eoi_map. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-by: Tobias Geiger <tobias.geiger@vido.info> --- drivers/xen/events.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/drivers/xen/events.c

Dovecot version 2.1.7 If a dovecot mount point (drive) dies, and the data is restored into the same path that's no longer a mount point (subfolder), dovecot complains about a missing mount point. Is it safe to do a `doveadm mount remove {path}` to fix the error since it's no longer a legit mount point? Example: We were storing indexes on an SSD drive mounted at /mnt/ssd. That drive

Hi, i''m not sure if i understood the new acpi xen cpufreq driver - here''s the output when loading xen_acpi_processor module in linux 3.4: dom0 dmesg: [ 32.728151] xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU8 [ 32.728156] xen-acpi-processor: (CX): Hypervisor error (-22) for ACPI CPU9 [ 32.728160] xen-acpi-processor: (CX): Hypervisor error (-22) for

I''ve followed this list for quite a long time and have even posted a couple of times. I used the early versions of IMQ from Devik (I think that was his name), and it worked well. I only ever got the chance to implement it in my test environment. I now need to implement it in my production environment. My Linux core router has nine interfaces and has a 27 megabit connection to the

Hi! i notice a serious regression with 3.5 as Dom0 kernel (3.4 was rock stable): 1st: only the GPU PCI Passthrough works, the PCI USB Controller is not recognized within the DomU (HVM Win7 64) Dom0 cmdline is: ro root=LABEL=dom0root xen-pciback.hide=(08:00.0)(08:00.1)(00:1d.0)(00:1d.1)(00:1d.2)(00:1d.7) security=apparmor noirqdebug nouveau.msi=1 Only 8:00.0 and 8:00.1 get passed through

Full_Name: Joachim Geiger Version: 1.9.0-1 OS: redhat 8.0 Submission from: (NULL) (194.94.233.87) Hello, the bug concerns the source-rpm of the 1.9.0 version on my redhat 8.0 system. The specfile requires tk-devel for compilation, but on RedHat8.0 the headers are already in the tk-rpm included. After changing tk-devel to tk, compilation runs smoothly. Best regards and thanx that U R to provide R

I would like to differentiate incoming traffic streams to guarantee minimum bandwidth to some services. However, as per the Adv-Routing-HOWTO it appears that only outgoing traffic can be shaped. Is this correct or is there a way of shaping incoming traffic? The problem could possibly be overcome if there is a way of routing traffic through a virtual host. Any tips on how to go about that? --

Can I use the same SFQ queue dicipline for all the classe in a CBQ or HBT system?