similar to: Multicast Routing

Hello. I''m new to this list. I''m trying to set up multicast routing between two networks: Internet ^ | Windows box | | UserModeLinux A <-----> Colinux Router <-----> UserModeLinux B

Hi, I have problem with multicast routing on my network. I tried mrouted and also pimd, but always same problem. When I set mrouted or pimd on one router, everything works fine, but when I start mrouted/pimd on another one, routing die. In moment when I start anorher mrouted/pimd /proc/net/ip_mr_cache is cleaned. My topology: gateway (no mrouted/pimd)

Hi, Anybody know anything about multicast routing? :) I see the HOWTO is rather lacking in this area... On my home network, I have multiple subnets attached to my router. I''d like multicast packets on either interface to be distributed on the other interface. (For context, this is to get Apple''s Rendezvous protocol to work across multiple subnets). I thought this should be

Hello all, I''m writing to the list, because I have a problem setting up my routing that I''m unable to overcome. 1. The situation: +-------------+ +-------------+ | actaea | eth0 | ilex | | 192.168.1.4 |------ localnet ------| 192.168.1.1 | +-------------+ 192.168.1.0/24 +-------------+

Hello list, Not sure if I am asking the question in the correct list. I am a newbie trying to get multicast routing to work on my linux 2.4 kernel. I am using usc pimd code. I have pimd which sets up the route in the kernel [ /tmp]# ip mroute show (22.22.22.1, 224.0.1.20) Iif: eth2 Oifs: eth1 [ /tmp]# I can see data packets arriving on eth2 [/tmp]# tethereal -i eth2 Capturing

Dear all, I''ve the following problem with routing + NAT: If I''ve two ISP and I''m using two nexthop in default route with MASQUERADE on both ISP links, I see routing cache regenerated, but sometimes packets sent to a new link (after cache regeneration) uses wrong source address for masquerading. Here is the config. I''ve two links to outside via two

Hi all, We want linux (ubuntu) with 2.6 kernel to act as multicast router and to pass multicast packets between different subnets. And linux machine as router has two network cards having two different subnets assigned onto. We first worked "sysctl -w net.ipv4.ip_forward=1" line on linux shell that made linux to work as unicast router. (like host, the multicast packets were discarded at

well, once i figured out what to do it was easy. 1) install freebsd over linux. 2) recompile kernel with: option MROUTING 3) start mrouted 4) go get yourself a cold beer. you deserve it! thanks! -bob CONFIDENTIALITY NOTICE: The information in this electronic mail transmission contains confidential information intended only for the use of the individual or entity named above. If the

* sorry for the 2 previous schemas, they came out a mess. I hope this one is understandable. hi: I have this 2 boxes set up like this: 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+ | |==================== | | eth1 | A | | B | ---- | |

hi: *I have this 2 boxes set up like this:* 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+ | |=======================| | eth1 | A | | B |---- | | | |

* sorry for the other schema, it came out a mess. I hope this one is understandable. hi: I have this 2 boxes set up like this: 2020::2/128 2020::254/128 3030::254/128 192.168.0.2/24 192.168.0.254/24 192.168.30.254/24 +-------+ eth0 eth3 +-------+

Hi, I''m trying to route multicast between 2 LANs using a GRE tunnel. The setup is: B to C is a GRE tunnel running over PPPoE. B is the multicast router. A is on the same LAN as B. The same ethernet adapter is used for both the LAN and PPPoE connections. I''ve setup smcroute since I only need static routing. Multicasts sent from C (the remote machine) to B over the

Hi list, I try to install the following network: /-----------------\ | Firewall 1 | \-----------------/ ___________________| |_________________ | 10.2.6.1 10.2.2.1 | | eth1 | | 10.2.6.11

Hello, I have a little strange config. I will try to explain it as short as possible. I have ethernet switch, which is Port Based VLAN enabled. For example: this switch have 3 ports. Port 1 is VLAN 1 only. Port 2 is VLAN 2 only. Port 3 is VLAN 1 and 2. This means that if packet come from Port 1 it will be sent ONLY to port 3. If packet come from Port 2 it again will be sent to Port 3 only.

Hi, I need a help on Linux routing, if you have some sparse time. I''m based in Madagascar and my English is not good; so please forgive me. *What I want to come-up with: *My main goal is to download using two modems at the same time, and combining their bandwidth, but I have failed miserably. The reason is this: our country is still using poor slow internets, and I have seen on the

Hi, I have been reading: http://lartc.org/howto/lartc.multicast.html in effort to understand how to route multicast traffic and just joined the group. History: I am trying to multicast mpeg (using the videolan server) on a private network. The server side of the network is copper gigabit, which connects to one of those cheap fast Ethernet switches with a single gigabit uplink. The problem

Hi William. Thanks a lot for your help. Im having some trouble recompiling my kernel after a installed the patch. Im running RH 7.3 with kernel 2.4.18-3. The patch I installed is routes-2.4.16-6.diff. I got no errors installing it. I added the multipath support, and recompiled it. The make dep and the make bzImage went fine. I got error during the make modules. These are the errors:

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello! I have a problem with a duplicate route entry, when using a pre-installed route and automatic take-over by the "heartbeat" daemon, which adds an address and the kernel adds an route automatically. Maybe anyone has an explanation... > ip addr 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue inet 127.0.0.1/8 scope host lo

hi, i wann to make multigateway routing and i read ur how to on http://lartc.org/howto/lartc.rpdb.multiple-links.html and create some rules which i am sending u, but with this rules i am not able to do multigateway routing on my linux router so plz help me out. thanks the rules are given below IF0=eth0 IF1=eth1 IF2=eth2 IP1=192.168.1.2 IP2=61.246.243.86 P1=192.168.1.1 P2=61.246.243.81

I''m trying to connect to two ISPs the connections are as follows: Eth0 IP: 192.168.1.1 Mask: 255.255.255.0 Eth1 IP: 216.167.217.241 Mask: 255.255.255.0 Eth2 IP: 216.167.208.40 Mask: 255.255.255.0 Here are the commands to set things up: #Load modules insmod /lib/modules/2.6.19.2- pyramid.metrix.net/kernel/net/ipv4/multipath_drr.ko insmod /lib/modules/2.6.19.2-