similar to: i don''t want to receive mailing list again

Please let me know how can I unsubscribe mailing list.I really would like to unsubscribe mailing list as soon as possible. Thank you _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl

This ''MSN'' is a web site? Im guessing it ''refresh''es every 5 minutes or so. They are proably testing cookies against the ip address they appear to be comming from. This is horribly wreckless of them if they arnt offering IPv6. Are they? They only way i have to remedy this problem is to get their IP range and bind it to the most stable connexion you have,

I have a script for dual internet connections that does this: ------------------------- #!/bin/bash IF1=eth1 IP1=203.219.190.106 P1=203.219.190.105 P1_NET=203.219.190.104 IF2=eth2 IP2=220.245.224.46 P2=220.245.224.45 P2_NET=220.245.224.44 IF0=eth0 P0_net=192.168.0.0 TABLE1=inet1 TABLE2=inet2 ip route add $P1_NET dev $IF1 src $IP1 table $TABLE1 ip route add default via $P1 table $TABLE1 ip

Здравствуйте lartc-request, Friday, October 03, 2003, 8:44:37 AM, you wrote: lrmdn> Send LARTC mailing list submissions to lrmdn> lartc@mailman.ds9a.nl lrmdn> To subscribe or unsubscribe via the World Wide Web, visit lrmdn> http://mailman.ds9a.nl/mailman/listinfo/lartc lrmdn> or, via email, send a message with subject or body ''help'' to lrmdn>

J, What i meant is...like in Linux you make use of the two external connections and collate them as mentioned in the document. Can you try keeping the Linux box in front of the two windowze boxen and collate the two LAN connections coming from them as mentioned in the HOWTO???. Trevor On Sat, 2003-06-21 at 01:28, Tesla 13 wrote: > Hello Trevor, > > Windows computer with DSL line

Hi I''m use htb and as I think if I don''t setup default class, all other (not classified) traffic must going throw 0 class without any shaping But when I try to make such config all other traffic doesn''t transmiting. I have some clients on vlan connected with modem (routing, not bridging) So modem has own addresses I try shape clients not modems If no default - no ping

I am wondering if someone can examine why my set up does not give me the desired result. What I aim to achieve is to make DNS, ICMP, POP3, HTTP, SSH, SMTP traffic at a higher priority than FTP serving and Kazza traffic. However, when the FTP server is busy servicing FTP traffic, web browsing traffic has dragged to almost unusable. Abstract of my iptables script follows:- # Mark traffic on

Hi, I have problem with this simple script: #!/bin/bash if [ "$1" == "del" ]; then tc qdisc del dev eth0 root handle 1: htb default 10 exit fi tc qdisc add dev eth0 root handle 1: htb default 10 tc class add dev eth0 parent 1: classid 1:1 htb rate 800kbit ceil 900kbit tc class add dev eth0 parent 1:1 classid 1:10 htb rate 300kbit ceil 600kbit tc class add dev eth0 parent 1:1

I am trying to build iproute2-2.4.7-20010824 from source on a 2.4.24 kernel. I have played a bit with ADDLIB and LDLIBS variables but I always get errors so I suppose it''s best if instead of playing I try to understand what does the following mean (from the README file): ADDLIB should contain inet_* functions, if your libc contains obsolete resolver library (<4.9.4) and you have no

Hi i have 2 class C 80.97.103.0/24 and 81.180.12.0/24 but i dont konw how to set hashing tables for HTB tc add dev eth0 parent 1: prio 0 handle 1: protocol ip u32 divisor 256 tc add dev eth0 parent 1: prio 0 protocol ip u32 match src 80.97.103.0/24 hashkey mask 0x000000FF at 12 link 1: but i want 2 hashkey for 80.97.103.0/24 and for 81.180.12.0/24 can somebody help me ? this is a part fo my

hi, all i run the following scripts : tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip \ pref 4 u32 match ip dst 10.0.0.1 flowid :1 my question is : can i know how many packets are matched by this filter? if i can , what should i do to get this counter value, then. thanks :) _________________________________________________________________ MSN

Hi, I have a Linux Box to share a internet connection with NAT: | ISP | | Router | +---------------+ 200.36.107.137/32 | | | 200.36.107.138/32 +---------------+ | Linux | | router | +---------------+ 192.168.1.254/24 | | +---- host 1 192.168.1.1/24 | +---- host 2 192.168.1.2/24 | +---- ... | +---- host n

hi stef oone more pb while shaping incoming traffic with imq .this one tc qdisc add dev imq0 root handle 1: htb default 20 tc class add dev imq0 parent 1: classid 1:1 htb rate 2mbit burst 15k tc class add dev imq0 parent 1:1 classid 1:10 htb rate 1mbit tc class add dev imq0 parent 1:1 classid 1:20 htb rate 1mbit tc qdisc add dev imq0 parent 1:10 handle 10: pfifo tc qdisc add dev imq0 parent

HI I have a bridge running ipp2p blocking Ares traffic and others protocols. This bridge works fine buts since two weeks can''t block Ares traffic. All protocols block fine but Ares not (upload and download). Somebody are using ipp2p blocking the latest Ares version ? My system settings are: kernel : 2.6.13 iptables: 1.3.3 ipp2p: 0.81 rc1 iptables -L -v output: Chain FORWARD

Hi Guys, Using the 2.6.test kernel? Alex and I have done some more tests and this is the patch incase ur using jdg-qos script http://www.digriz.org.uk/jdg-qos-script/index.html#qos-2.6 Thanks K _________________________________________________________________ Winterize your home with tips from MSN House & Home. http://special.msn.com/home/warmhome.armx

About the cbq.init. Four machines which traffic to limit in same LAN. Is the samething if I put limiting rules to four different files or all to the same file? Like: DEVICE=eth0,10Mbit,1Mbit RATE=64Kbit WEIGHT=6Kbit PRIO=5 RULE=192.168.0.5 RULE=192.168.0.6 RULE=192.168.0.7 RULE=192.168.0.8 OR four equal files with different IPs, Ids and no PARENT rule? What style of ID numbering you use if

Hi, I want to use the dsmark, but it always says: "unkown qdisc", although I have enabled it (y in Network options), and I have my kernel recompiled. I am using SuSE 8.1, 2.4.20 Kernel, tc available at the HTB site (with already precompiled HTB queue). Can anybody find the problem? thx _________________________________________________________________ MSN 8 helps eliminate e-mail

Hi, I''m using kernel 2.4.20 and like to use Stephen Hemminger ''s packet delay scheduler patch the patch is there : http://mailman.ds9a.nl/pipermail/lartc/2004q1/012112.html can anyone explain me how to apply it ? Regards Pascal OFFREDO _____________________________________________________________________ Un mot doux à envoyer? Une sortie ciné à organiser? Faites le en

Hi Paolo Malfatti, Thanks for your script. It works fine. I get what I expect. THANK you all the way until it comes to an end. FOR the benifit for evryone in the LIST. HERE IS the SCRIPT AGAIN. INTERFAZ_LAN=eth0 FULLBANDWIDTH=256 BANDWIDTH4LAN=64 tc qdisc del root dev $INTERFAZ_LAN tc qdisc add dev $INTERFAZ_LAN root handle 1 htb r2q 4 tc class add dev $INTERFAZ_LAN parent 1: classid 1:2