similar to: what''s wrong with the last line ?

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1:

Hello all, I am trying to configure a linux box to make some QoS into my netowork and, at the same box, control my clients bandwidth. I have this classes created: ---------------------------------------------------------------- UP="eth0" # wan infocontabil DL01="eth2" # lan clientes $TC qdisc del dev $DL01 root 2> /dev/null >

I am wondering if someone can examine why my set up does not give me the desired result. What I aim to achieve is to make DNS, ICMP, POP3, HTTP, SSH, SMTP traffic at a higher priority than FTP serving and Kazza traffic. However, when the FTP server is busy servicing FTP traffic, web browsing traffic has dragged to almost unusable. Abstract of my iptables script follows:- # Mark traffic on

hello, a friend of mine have this configuration: 10 x PC -- router/linux/rh8 -- ADSL Modem -- ISP let''s say that the bandwidth is: 5M and 800K he does dc++ and counter-strike, so let''s say the UP is full, and the ping from the counter server is 300ms, the server cut the connection, and no more game, the player is unhappy. The normal ping is 50ms. so he thinks to put some

I have blocked all high ports used by kazza but new kazza is going also now. It is going on 80 port, it is possible in shorewall to block kazza ? Mayby I should write some rules for 80 port ? Maciek -- ---- Oferta jakiej jeszcze nie by³o! Serwer www 60 MB za 99 z³ rocznie Szczegó³y: www.oferta.alpha.pl ----

root@Delta:~# tc filter add dev ppp0 parent 1:1 flowid 1:5 protocol ip Unknown filter "flowid", hence option "1:5" is unparsable root@Delta:~# tc filter add dev ppp0 parent 1:1 classid 1:5 protocol ip Unknown filter "classid", hence option "1:5" is unparsable I don''t understand why it does not work. Can anybody explain me this problem? --

Hi, here I have another newcomer question :-) in the section 9.6.1 of this how too http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html we can read commands about filters : ------------------------------------------ # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \ ip dport 22 0xffff flowid 10:1 # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \

I downloaded iproute2-2.4.7-now-ss010824.tar.gz and I did patched tc with the htb3.6_tc.diff from htb3.6-020525.tgz and when I try to use a htb script I get just errors. I did not patch the kernel, since I use kernel 2.4.21 and I saw on - HTB Homepage that I need to patch it only if I run version 2.4.20 or earlier. Do also need the kernel patch ? Or maybe is something else wrong? RTNETLINK

Le 26 juil. 07 à 13:55, Georgi Alexandrov a écrit : > Vincent Dautremont wrote: > >> Hi, >> here I have another newcomer question :-) >> in the section 9.6.1 of this how too >> http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html >> we can read commands about filters : >> ------------------------------------------ >> >> # tc

Hey, I have a problem adding a filter matching anything, here is my setup: ############### tc qdisc add dev eth0 handle 1: root prio tc qdisc add dev eth0 parent 1:1 handle 10: pfifo tc qdisc add dev eth0 parent 1:2 handle 20: tbf latency 50ms rate \ 128kbit burst 256kbit tc filter add dev eth0 protocol ip parent 1:0 prio 1 handle 666 fw \ flowid 1:2 tc filter add dev eth0 protocol ip parent

People, I''m trying to set up the tc filters for a PRIO queue. I''m basing it off of marked traffic via iptables. For example, I''ve marked two classes of traffic with ids "2" and "4", and now I''m filtering those to bands 1 and 2. tc filter add dev eth0 parent 1: prio 0 protocol ip \ handle 2 fw flowid 10:1 tc filter add dev eth0 parent 1:

Yes sure here they are: The first one that i have received 2day and does not work almost at all: #!/bin/bash ETH_IN="eth1" ETH_OUT="eth0" BANDA_TOTALA="2Mbit" # pentru neclasificati ar trebui sa fie banda minima - 1k - aici ar trebui sa ajunga trafic necunoscut, # care nu e organizat in shape-uri BANDA_NECLASIFICATI="8kbit" #Shape generale /sbin/tc

i am using ipp2p module (v 0.6) from http://rnvs.informatik.uni-leipzig.de/ipp2p/index_en.html I have tried it on kazaa and e-donkey connections. Unfortunately, I am interesting in limiting kazaa traffic, which this modules seems not to work right with it. (Kazza traffic is not identified most of the cases....). Has anyone tried this kazza bandwidth control???

For simplicity, I tried this: tc qdisc add dev eth0 root handle 1: prio tc qdisc add dev eth0 parent 1:1 handle 10: sfq perturb 10 tc qdisc add dev eth0 parent 1:2 handle 20: sfq perturb 10 tc qdisc add dev eth0 parent 1:3 handle 30: sfq perturb 10 tc filter add dev eth0 protocol ip parent 1: prio 2 flowid 1:1 The last line prints: Unknown filter "flowid", hence option "1:1"

Hello! I was always using "default" in HTB to choose default class, but now I need to do it with filters. Tried following command: # tc filter add dev eth0 protocol ip parent 10: prio 2 flowid 10:2 Unknown filter "flowid", hence option "10:2" is unparsable It is from example in LARTC Howto. My question is then - how to make a filter matching all without eating

Hello I have problem with wrr and more than 1300 classes when i try to add qdisc like: tc qdisc add dev imq1 parent 1:21 handle 1000: wrr dest ip 1512 0 then i have a message like: RTNETLINK answers: Cannot allocate memory And some other problem: When I do more than 2048 filters I have message like: Classes: tc class add dev imq1 parent 1:1 classid 1:9 htb rate 1024kbit ceil 2048kbit .. tc

EHLO tc gurus. New to traffic control. Unfortunately, the politicians here in Denmark have decided that a PC is the same as a television set - so anyone owning a PC and internet connection of over 255 kbit/s must pay DKR 2200/year = EUR 300 = USD 400 in television licence fees :-( This is a lot of money for poor students, so we want to offer the students the *option* of limiting their

Hi ! I want to share my bandwidth between 10 computers. I want to redirect computer A(192.168.1.4) to htb class 1:2 and the others to htb class 1:3. But the last tc filter doesn''t work : Error message : "Unknown filter "flowid", hence option "1:3" is unparsable. " I know the option "default" for htb but I don''t want to use it for some

I have setup some qdiscs and filters more or less straight from the howto. they work pretty good. however, when i delete one filter or all of them, they all appear to be deleted (as shown by "tc filter show dev ppp0"). the real problem is, that as soon as i recreate a single filter, all the deleted filters reappear along with the new one. thus i have an ever increasing set of filters.

Hi I have defined a single HTB qdisc on eth0 with one root class 1:1 further subdivided as below, nothing complicated. 1: (root qdisc) | | 1:1 (root class) /\ / \ / \ / \ / \ 1:10 \