similar to: Asuscom 56000 serial modem

I finally got my ASUSCOM (Cologne chip) ISDNLink card working here in the US. When a call arrives, I get "Unknown IE 42 (Unknown Information Element)" and "Unknown IE 21 (Unknown Information Element)". IE 21 (0x15) is defined as Q931_CALL_STATE_SUSPEND_REQUEST. IE 42 (0x2a) is not defined in the code and I couldn't google it. Is this something perculiar with ISDN in

Hi All Im having problems setting up a dialup connect in CentOS PPC I get the following error when attempting to use wvdial (modem set as /dev/ttyS0) --> Cannot open /dev/ttyS0: input/output error Ive tried kppp but ive had not luck Anyone know how to fix this? normally I would use pppconfig and pon/poff but havent been able to use/find them, are they install by default? __ Note: this

Hi All, I'm wondering about something that seems a bit odd. I've setup a CentOS 4 box for a client that is "still" using dial-up and to activate the connection appears to require root privileges. Why is this? The reason Linux was loaded on this box was to provide a very functional box that could be easily locked down so when the cat was away the mice couldn't play,

tried to get the above program running (its a phone managment program for the siemens mobile phones) but it always brings up the error cannot open COM port.I can send AT commands to the phone via the terminal in KPPP. Martin Warby

Hi all. Firstly, I apologize if this question has been asked before, which I'm sure it has. I'm only new to Linux although I have been 'dabbling' for awhile now with Ubuntu, Fedora Core 4, SimplyMEPIS, Xandros to name a few. I found Centos 4.1 on the cover disk of the September issue of APC Magazine and thought I'd give it a go. I want to learn linux and thought this one

Can I upgrade my Centos 4.1 system with the 4.2 ISO install disc? If so, how do I do it? It seams to want to do a full (i.e. format, wipe out old) install over everything. I do not want to lose my various configurations (e.g. kppp, kde desktop settings, etc) that I have already set up under 4.1. -------------- next part -------------- An HTML attachment was scrubbed... URL:

I'm still playing with * at the moment. Just trying to figure out how much it can do. Anyway, it looks like * supports voice modems. So here come the obvious questions... How well does * support vmodems? How do I set * to use my vmodem for incoming calls? Has anyone gotten it to work? Thanx, Mike Diehl.

Hi everyone, I am in the last stages of converting my business to Linux. All software is now open-source or running under wine. Except one. The software supplied by my bank. This runs fine under wine apart from the dialup to the bank. No matter what settings I use for the modem, I always get the message that the modem cannot be initialised. Here's what I have confirmed so far: The com port

Thanks for the reply! I tried the instructions on Frank's IE5.5 page, including copying all the files and directories to my ~/.wine/fake_windows/ directory (except jsnl.dll, which I could not find...) I do not know if dcom95 exists somewhere in one of the directories that I copied across, but I know that exactly the same thing happens when I try to run IE on the Windows partition (instead of

Hello, Could someone with the requisite shorewall expertise please help me? Here is a description of my problem. I dial in to my ISP using kppp. It seems to establish a connection just fine. However, only a handful of bytes are exchanged. I must then become ''root'' and issue ''shorewall start'' in order to get the Internet connection to work normally. Once

I just tried the Centos 5 Live CD on my Thinkpad T41. It works pretty good but did not recognize my Laptop's modem or WiFi (I guess no surprise there). I do have a CardBus modem that is not a Win-modem that I could try when I get home. I did not see anyway to configure a PPP dialup call. Is there a way to run kppp or Gnome's equivalent? -------------- next part -------------- An

Hi, I am trying to get IE5.5 to work on Codeweavers Wine (20020411-6). It runs OK, but I get a dialog saying that "Dial Up Networking could not be started." How do I get it to use kppp (which is already connected)? I have tried setting "Com1 = "/dev/modem"" (and Com2, 3 etc.), in ~/.wine/config, but it does not help. Any ideas? TIA, Martin

Just when I thought I couldn't be wrong, I was wrong. We have woodpeckers that drill into the arial telephone cables, and water seeps through the holes and partially grounds the tip and/or ring wires causing hum. I thought the hum/buz on my lines was a telco problem. The Qwest HQ noise team assures me that my lines are within spec. Sure enough, when I listen on the test set the lines

I am new to asterisk. I need help getting started, if it's even worth getting started. I say if it's worth getting started because I'm not sure if my hardware will even work with asterisk. I have a US ROBOTICS 56K V.90 PCI SOFT MODEM. I have standard twisted pair telephone wire. I can't afford to alter my hardware. I know I won't be able to do any sophistocated VoIP stuff.

Hi I have a small ISDN PABX , (BRI) at home - Siemens Gigaset 4175 which has cordless DECT extensions. I have set up asterisk on FC3 with two HFC cards and I am using the latest bristuff. I am trying to use * between my ISDN line and my PABX. One card is in TE mode and can receive and make calls OK. I can make and receive external calls to a SIP phone. I cannot get the other card to talk to my

Moro, On 5/14/19 4:36 PM, Oskar Vilkevuori wrote: > Hi there, > > Any idea? Please use these packages  https://wiki.xiph.org/Icecast_Server/Installing_latest_version_(official_Xiph_repositories) or rebuild the Debian package but with the openssl -dev package present on your machine. > > I found > from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=744815 that >

Hi there, Is there something I’m missing here… INFO connection/get_ssl_certificate No SSL capability Does this indicate that I have a package not supporting SSL or have I misconfigured something somewhere? Two Listening sockets 8000 and 8001 (tried also 8002 & 8443) SSL enabled. Certificate (public and private part together in one file) .pem. read access for user, group and other too…

Hi Oskar, I run on debian 9 use icecast 2.4.4 using apt-get installl icecast2 It works fine on ssl using a pem cert. I thing your .pem file is not correct. Best regards, Michel > Op 14 mei 2019 om 18:36 heeft Oskar Vilkevuori <oskar.vilkevuori at ovt.fi> het volgende geschreven: > > Hi there, > > Any idea? > > I found from

Hi Leif, Did You faced that with the exact same Chrome version? Since this version is the only one having this issue. I have had this kind of arrangement (intro + live stream) for decades. Technology changes but the idea is the same. I have tested a lot of hardware and combinations. I do have a fail over stream (with different specs) and that hasn’t been an issue at all. I do not know but I

Hi there, How should I prepare or put together crt-files for icecast to understand it? I have two files. One having one cert and the second two certs. I guess the first one is my host and the rest is for linking back to CA… Moimoi, Oskar ---------------------------------------------------------------------- Oskar Vilkevuori GSM +358 400 280500 oskar.vilkevuori at ovt.fi