similar to: tc classes limit

Hi, i''m running a Bridge/iptables firewall, with no tc filters configured CPU utilization barely reaches 1%, i had to rate limit one particular server outgoing traffic and setup a HTB scheme like this iptables -F PREROUTING -t mangle iptables -A PREROUTING -t mangle -p tcp -s 99.99.99.99 -j MARK --set-mark 2 tc qdisc del dev eth0 root tc qdisc add dev eth0 root handle 10: htb default

We run a Hosting farm behind a bridge/iptables firewall setup running Gentoo with kernel 2.4.20-gentoo-r6, connected to a dual 15Mbps international internet pipe / , as this: Net Pipe --------- eth1 Bridge/Firewall eth0 -------- Internal Hosting Network lately we have been looking at htb to somehow control excessive usage from the users behind, but in our implementation there seems to be an

ingress can be used to control the incoming packet, such as: tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.11 police rate 10kbit burst 10k drop flowid :1 tc filter add dev eth0 parent ffff: protocol ip prio 5 u32 match ip src 172.16.1.22 police rate 10kbit burst 10k drop flowid :2 first ,I do not sure these method can

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

Hi, I want work out a GUI interface for htb and now here comes to the part about adding and removing classes and filters. Here is an example script. TC="tc" DEV="dev eth1" echo "Add root qdisc, default traffic go to 1:30" $TC qdisc add $DEV root handle 1: htb default 30 echo "Divide the traffic into different classes and levels" # -------- level 1

Hi, I have a problem with ''tc filter'' on a 2.4.22 kernel from Slackware 9.1 distribution. The tc command binary is from htb3.6-020525.tgz (http://luxik.cdi.cz/~devik/qos/htb) I''m trying the following command sequence: tc qdisc add dev eth0 root handle 1: htb default 1 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 1200kbit ceil 1200kbit tc class add dev

hi, all i run the following scripts : tc qdisc add dev eth0 handle ffff: ingress tc filter add dev eth0 parent ffff: protocol ip \ pref 4 u32 match ip dst 10.0.0.1 flowid :1 my question is : can i know how many packets are matched by this filter? if i can , what should i do to get this counter value, then. thanks :) _________________________________________________________________ MSN

Hello.. I have a linux box and I want to make priority on traffic generated by my LAN''s computers.. I don''t have a guaranted bandwidth, so I wanna use sfq... I want to make traffic to port 80 , 443 , 25 & 110 PRIORITY 1 Traffic src or dest 192.168.0.2 to make priority 2 And the rest to put it in proiority 3.. I did the following : tc qdisc add dev eth0 root handle 1:

Hi, I am trying to do both ingress and egress bandwidth management on a bridge. eth0 is the WAN interface. IPTraf shows that the following script is running successfully and it limits bandwidth both ways to 256 KB However when I want to see the statistics using tc - it only shows me stats for htb class and not for ingress class. The tc output is as follows: tc -s -d class show dev eth0 class

Hello everybody, I try to work with TC for a little while in my study and there still are a few questions that I can\''t find any answer anywhere. Firts about qdisc and classes: - What is exactly the difference between qdsic and class ? They are so \"intimately tied together\" that i\''m not sure not make the difference. Why can\''t we have a qdsic HTB with

Hi all, I want to allocate bandwidth for ipsec interface using CBQ/tc. Suppose the conf. file is like this, DEVICE=ipsec0,10Mbit,1Mbit RATE=128Kbit WEIGHT=10Kbit PRIO=5 RULE=192.128.1.0/24 Does it work or What else options need to be taken care like ipsec packets/protocol/port # etc.? C''d anybody suggest please? regds, Srikanth. _______________________________________________ LARTC

Hi guys, I''m new to TC HTB traffic shaping.... I installed it at my first try on my Bearing Leaf Router/Firewall I use the tc -s class show dev eth? To see my output All looks dandy and nice, but it''s figures, of which at current momment looks like French to me, I would like to see exactly what these figures looks like in a GRAPH style... I know I can use MRTG, I do have

I have an htb qdisc setup and it is shaping my traffic wonderfully but I''ve just recently started taking a look at the output from the command tc -s class ls dev eth? Looking at the "rate" line I thought to myself..."cool I can use this to graph throughput avg.es without having to worry about the "Sent bytes" rolling over or being lost when the htb qdisc is

Dear List, I am a tc newbie, and I''ve been working through the LARTC HOWTO to try to understand how qdiscs, classes, and filters fit together. I was confused by the example in section 9.5.5.1 (see excerpt below). I thought that classes were could only be attached to qdiscs (classful ones). In the example, however, classes are being attached to other classes. Can anybody explain to me

I''m trying to implement something similar the the diagram in section 9.5.2.1 in the LARTC HOWTO, but must have missed something somewhere :( I''m trying to hack up wondershaper, as it looked like a good place to start.. Here''s where I currently at, but I''ve tried alot of different things, all failing, some worse than others. The end result is to throttle back 126

Hello , I have installed Tc and have problems running basic tc commands for PRIO qdisc . I tried tc qdisc add dev eth0 handle 1 root prio Result : Invalid argument tc qdisc add dev eth0 root handle 1: prio Result : Invalid argument What could be the problem.? Regards Andre --------------------------------- With Yahoo! Mail you can get a bigger mailbox -- choose a size that fits

Hi I''ve searched the archive for a solution where I want to limit/shape WLAN users. I only know''s their MAC, because they get their IP from dhcp. > Why not, just use negative offsets with U32 to access >the 14-byte eth frame header before the IP header: > >Decimal Ofs Description >----------------------------------- >-14: DST MAC, 6 bytes >-8: SRC MAC, 6

I tried installing the WonderShaper on my internal link, mostly to get the SFQ installed. I set uplink and downlink to 100000 to match the link speed and changed the bandwidth on the cbq line to 100mbit. This killed transfer speed *to* the box, knocking it from 30-40 Mbps down to about 800 kbps. Commenting out just the ingress control restored the speed. What about the ingress policer would do

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 # tc qdisc add dev eth0 root handle 1: htb default 30 Unknown qdisc "htb", hence option "default" is unparsable Do I need to patch tc? I am running redhat 7.2 and iproute-2.2.4-14 - -- +-------------------------------------------------------------------+ | Luis Miguel Cruz. | |

Hello everyone! I have some problems with the tc command. I write the same commands as in the manual but it gives me an error. I write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000" for example but it doesn''t work. I have similar problems with "tc qdisc add dev eth0 root handle 1: prio" I don''t find the solution. I have the 2.4.18