similar to: Problems with netfilter

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2)

I try to shape traffic using HTB and mark packets within iptables using PREROUTING. But the filterrules seems to ignore the marks set with PREROUTING Only POSTROUTING marks are accepted. First my configuration I have a router connected to the internet via ADSL over interface ppp0. eth0 is a tunnel to ppp0 and eth1 serves the LAN. LAN is 192.168.57.0/24 on 10Mbit ppp0 is 80.126.16.44 on

I have a very simple setup exactly as described in the HOWTO section " 4.2. Routing for multiple uplinks/providers". One is cable (eth1: dhcp) and the other is PPPoE (ppp0). I used the following commands to configure the routing once all of my interfaces are up and i have configured SNATing for them: ip route add 66.11.173.0/24 dev ppp0 src 66.11.173.224 table 11 ip route add default

Hi all, I have the following configuration: _______ +------------+ / diginet link | | | +-------------+ Provider 1 +------- __ | | | / ___/ \_

Hi guys, Can you take a look at this? :) +-----------+ | | eth1-|- | | -|-eth0---LAN--- | | eth2-|- | | | +-----------+ - eth0 is connected to the LAN having the IP=LAN_IP eth1 is connected to the first ISP having IP=ISP_IP_1 and GW=ISP_GW_1 eth2 is connected to the second ISP having IP=ISP_IP_2 and GW=ISP_GW_2 I need

Dear All, Firstly, thank you very much - shorewall is great. I''m not a member of this list, and please forgive me if I am suggesting something stupid, but the following occurs to me, and I thought it might be useful. Why no make it possible to specify zones as well as interfaces in the /etc/shorewall/masq file ? Eg: instead of: eth0 eth1 one might write: net loc (or masq in

i''ve read your http://lartc.org/howto/lartc.rpdb.multiple-links.html article as well as Advanced IP Routing (esp. chapter 10.4) and still unable to make this thing work. am i that helpless? :) is there anyone to guide me through the multiple ISP setup? into details. i got 2 dsl connections from different ISPs (A and B), both connections use PPPoE, both got assigned with dynamic IPs

snat not working my local ip is aaa.aaa.aaa.aaa asterisk sitting on the internet at ip bbb.bbb.bbb.bbb my firewall''s internal ip is 192.168.0.254 i did snat: iptables -t nat -A POSTROUTING -o ppp0 -j SNAT --to aaa.aaa.aaa iptables -t nat -L -v gives: Chain POSTROUTING (policy ACCEPT 23663 packets, 2182K bytes) pkts bytes target prot opt in out source destination 33056

how to use iproute/iptables to balance by packet OUTBOUND traffic between 2 PPP (pptp cable modem and pppoe adsl modem) links to the same ISP . also by using the fact that the ISP dosen''t filter source IP address - meaning i can use either PPP''s link assigned IP address as the source IP in the ip header.., it works for both devices.., what i want to achive is : when uploading a

I''m trying to setup traffic shaping on my linux gateway/router. The system has 3 interfaces: eth0 - My LAN - with IP address 192.168.0.254 eth1 - The ethernet connection to which my ADSL modem is connected. This has a 10.25.x.x IP, more on this later. The ADSL link has an upstream of ~1.2mbit. ppp0 - The PPP connection which is my WAN connection, with a real world IP. The system acts

Hi Here is a short description of my network: ppp0 (adsl) ppp1 (adsl) | | | | --------------------- | Router | | Firewall | | MASQUERAD | | DNAT | | | | eth0 | --------------------- | | | ---------------------- |

Hello all, I''m writing to the list, because I have a problem setting up my routing that I''m unable to overcome. 1. The situation: +-------------+ +-------------+ | actaea | eth0 | ilex | | 192.168.1.4 |------ localnet ------| 192.168.1.1 | +-------------+ 192.168.1.0/24 +-------------+

Hi all iam trying to deploy loadbalance and failover My setup description --Fedora Core 4 --Linux 2.6.12.3 #1 SMP Mon Jul 25 22:37:34 IST 2005 i686 i686 i386 GNU/Linux --tc utility, iproute2-ss050314 --ip utility, iproute2-ss050314 --iptables v1.3.0 And i had deployed Following configuration #table main with priority 50, the highest one ip rule add prio 50 table main #table 201 ip rule add

Hello! My system is: Internet ADSL(PPPoE) ---> ppp0 [LINUX server(router)] eth0 ---> LAN Server(router) is running on LINUX Slackware 8.1. I have recompiled a 2.4.22 kernel, enabled all QoS support in the kernel config, including HTB. My ADSL bandwidth is 256Kbit/s for download and 64Kbit/s for upload. I use the following HTB+IPTABLES configuration, because I want to reduce bandwith for

Hi Ppl I have 5 adsl lines that after reading quite a bit i managed to get load balanced now abvoiusly it doesnt load balance evenly and this works on what routes are still in the routing cache. my question is my outbound masquerading had to be modified to use snat in iptables instead of just plain masquerading my outbound masquerading now works but my inbound port forwarding doesnt work would

Hi, Thanks for the reply. Thats where the problem starts. If I set ppp0 as the default gw the internet doesnt work anymore. This is how im doing it... route del default route add default gw 217.32.81.74 dev ppp0 if I put it back to ppp1... route del default route add default gw 217.32.68.73 dev ppp1 It works fine again. Whats up with that? Cheers, Chris ----- Original Message

Hello! I''ve got the following setup: ippp0 (isdn), ppp0 (adsl), eth1 (internal lan), eth0 (nic dedicated to the adsl modem) Firewall rules: Default 2.4. iptables (everything set to accept) except: iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE iptables -t nat -A POSTROUTING -o ippp0 -j MASQUERADE Routing Table: Default gw is set to the ptp partner of ippp0 Problem: Packets

I already setup several 2 gateways boxes, with rules too decide which lan should use which gateway. Now I''m stuck with a simpler problem. At home I was just making some experimental setup: * 1 adsl (ppp0) * 1 more tables in rt_tables (200 ping) called "bluff" * table ''bluff *has not* a default route root@fw-eden root # ip ro li table bluff

Hello All. I have a strange problem on my router. I use a xl2tpd program to establish a connection to the INTERNET. After I start xl2tpd it's create a new ppp0 device with correct ip parameters, also it's add some routes to the routing table and all this routes are correct too. After connection with provider are establish the router exec some simple iptables+NAT commands to give an

Hi, I''ve set up a Linux box with redhat on to act as an internet gateway and I''m running into a few problems. Its got two adsl modems connected to it, both connected to seperate 512kbs lines. Now I''ve followed the simple source routing in the advanced routing howto to the letter but it doesnt work. I''ve got it autoconnecting on startup and redhat puts ppp1